0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

HHIP 3900-2112 Kit di bloccaggio da 58 pezzi (scanalatura a T da 7/16 di pollice) Dimensione perno 3/8-16 Fessura da tavolo da 7/16"

Brand:HHIP

3.5/5

€
158.74

Kit di bloccaggio da 58 pezzi per una scanalatura a T 7/16 ~ La dimensione del perno è 3/8-16 ~ Realizzato in acciaio fuso alimentato per una maggiore resistenza. ~ Tutte le parti sono trattate termicamente. ~ Include 4 perni da 3, 4, 5 e 6 ciascuno, 4 dadi di accoppiamento, 6 dadi flangiati, 6 morsetti per gradini in acciaio forgiato, 6 dadi a T, 12 blocchi per gradini in acciaio e 1 supporto da parete.

Quantity
Aggiungi al carrelloCompra subito

EAN: 0769053021539

Categories: Prodotti industriali e scientifici, Chiodi, viti e elementi di fissaggio, Noccioline, Dadi con scanalatura a T,

Realizzato in acciaio fuso alimentato per una maggiore resistenza. Adatto a piccole fresatrici e tavoli. Tutte le parti trattate termicamente. Slot tavolo 7/16.
Brand HHIP
Country of Origin China
Item Dimensions LxWxH 12 x 8 x 8 inches
Item model number 3900-2112
Manufacturer HHIP
Material Alloy Steel
Product Dimensions 12 x 8 x 8 inches; 12.62 Pounds
Style Modern

3.5

13 Review
5 Star
68
4 Star
18
3 Star
10
2 Star
2
1 Star
2

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: jeremy
Just what I needed.
Pretty nice set for the money. They work exactly as desired. As some people have mentioned they don’t thread thru the t nuts, which is actually preferred to keep from making a jacking bolt and breaking the table. The threads are a little rough but that’s no real big deal. I would buy another set but my friend had an extra set of this size.
Scritto da: EAK
Good for hobby work.
Good quality. I was able to use them right out of the box. I use them to clamp down work pieces on my milling machine.
Scritto da: Tek
Seems to be pretty solid.
The set arrived with a lot of oil on it. metal pieces are usually milled and manufactured using lubricating oil, so it is common to see pieces packaged up with that oil still on the item. However, these had a rather unusually large amount of oil on them. All the pieces are shipped in the display storage holder, so all that oil gets down into the crevices in the holder, and it’s difficult to remove. When you open up the package, lay out some old newspaper or a flat cardboard box or something to make cleanup easy. The storage holder appears to be a low-grade afterthought part, akin to a DIY 3D-printed item. I was rather disappointed to see that such low quality. The threaded rod slots are too tight, and with everything smashed in so close together, it is difficult to extract the rods and pieces with bare fingers, and impossible with gloves on. This would be a very easy thing to fix. It seems like all of these kits all come in the same holder tho, so I guess someone just started copying designs instead of really thinking out the purpose of the holder and the environment in which it is likely to be used. Frankly I see myself probably disposing the holder altogether and just throwing all the pieces in a toolbox drawer. Oh, yer probably also going to just chuck the stupid flimsy wrench they include and get a real open wrench. What they include is the same garbage single-use thin pot metal types that you find in build-it-yourself lawn furniture kits. The first time you slip, it bends the tines and it’s useless. It’s also more likely to strip the nuts. Save yourself the headache, and get a real wrench. Using the clamps tho... seems to be pretty sturdy. I haven’t really cranked on them or put them thru any high-torque drilling or other demanding applications, but from a preliminary light use so far, they seem to be working fine. So, I guess the actual clamps are ok, but the storage box and wrench they include are useless, and be prepared to spend a half hour cleaning all the oil off of everything when you open the box. 4 stars because of the stupid box and wrench. Could be 5 if they fixed that.
Scritto da: anthony giannotti
Needed
Exactly what I needed and the price can't beat it
Scritto da: Nathan H.
Kinda disappointed
I'll start this off with that I only paid $50 for this. I got it "used like new" . For the price that I paid it's ok I suppose to get you buy. Everything seems pretty cheap. Cuts arnt straight, the holes to hang it look like someone cut them with a pocket knife. And it was missing 1 of the small wedges. I would not pay full price for this. In the picture of the T nut the top nut is from a $125 kit the bottom is from this kit, normal price is $75 I believe. You get what you pay for I guess but since I did.t pay full price it will get me by.
Scritto da: Michael M.
Not sure yet
Im not sure as i just received it, but the T nuts are metric and the regular nuts and threaded rods are sae. So thats why people are having issues going all the way to the bottom. Not sure if thats how its supposed to be but why would anyone want y threading a metric nut onto a standard rod? I only found this out because the ones that came with My machine or metric as well
Scritto da: Philip Wolters
You may not get what you order.
I already have a RED set, the smaller of the two. I ordered the BLUE set so I could grab and go. I received the same RED organizer! The box shows a BLUE organizer on it too. Upon opening the box my hardware was in a plain cardboard box separating the RED organizer from the oily hardware. This was very nice, better than the other RED kit. I opened the plain box and the hardware was wrapped in groups in plastic wrap. I was pleased to see this and was not covered in oil as I opened the individual wrappers. Milling looked good with even, bright finish. Although the threading is rough, I suspect it will clean up well. I love the dark bluing and hope it goes deep in the steel. I have not tried any of these yet, but will update if necessary. I would love it if they'd send me the BLUE organizer I ordered.
Scritto da: Amazon Customer
Good square metal easily upgraded to 9/16 channel
They work great. Hard durable steel, but it only comes with two of each length hold down tabs but four of each standing blocks for the price would think they could put in four of each hold Downs so you don't have to use different length at the same time but they work great. Can easily be upgraded to half inch or 9/16 t slot tables with only purchasing larger t slot nuts are they all use 3/8 thread
Scritto da: Sean Rendell
Good combinations of sizes too
Works well and seems to do the job. Good combinations of sizes too. Some of the nuts and rods are a bit scratchy feeling when threading them together with your fingers, but will likely free up after a few uses. I will buy them again if I ever need more.
Scritto da: Dan
Le bon ratio qualité prix
Parfait pour ma fraiseuse ce n'est pas la plus grande qualité mais fait bien le travail
Scritto da: jimmy turgeon
Ok for the price.
But received with broken plastic holder.
Scritto da: Someguy
Looks good
Mine was missing one of the four small triangle support blocks, have contacted HHIP company, haven't heard back. Otherwise seems fine. Kinda pricey, but fine.
Scritto da: Ryan nodwell
Five Stars
Can't beat the price.

Prodotti correlati

hot
JW Winco A80010 DIN508 Dado con scanalatura a T, M6 x 8 mm, Acciaio
0.1/5

€ 25.56

JW Winco A80010 DIN508 Dado con scanalatura a T, M6 x 8 mm, Acciaio
0.1/5

€ 25.56

hot
Te-Co 41406 Black Oxide 1018 Steel T-Slot Nut, 3/8"-16 TPI, 5/8" Height x 7/8" Width x 9/16" Table Slot (Pack of 5) 3/8"-16 7/8 pollici 5/8 pollici 5
3.7/5

€ 45.91

Te-Co 41406 Black Oxide 1018 Steel T-Slot Nut, 3/8"-16 TPI, 5/8" Height x 7/8" Width x 9/16" Table Slot (Pack of 5) 3/8"-16 7/8 pollici 5/8 pollici 5
3.7/5

€ 45.91

hot
Te-Co 41403 Black Oxide 1018 Steel T-Slot Nut, 5/16"-18 TPI, 3/8" Altezza x 5/8" Larghezza x 3/8" Slot per tavolo (confezione da 5) 5/16"-18 5/8 pollici 3/8 pollici 5
2.9/5

€ 44.44

Te-Co 41403 Black Oxide 1018 Steel T-Slot Nut, 5/16"-18 TPI, 3/8" Altezza x 5/8" Larghezza x 3/8" Slot per tavolo (confezione da 5) 5/16"-18 5/8 pollici 3/8 pollici 5
2.9/5

€ 44.44

hot
Te-Co 41401 Dado per scanalatura a T in acciaio 1018 in ossido nero, 1/4"-20 TPI, 1/4" Altezza x 9/16" Larghezza x 5/16" Fessura tavolo (confezione da 5) 1/4"-20 9/16 pollici 1/4 pollici 5
3.7/5

€ 41.70

Te-Co 41401 Dado per scanalatura a T in acciaio 1018 in ossido nero, 1/4"-20 TPI, 1/4" Altezza x 9/16" Larghezza x 5/16" Fessura tavolo (confezione da 5) 1/4"-20 9/16 pollici 1/4 pollici 5
3.7/5

€ 41.70

hot
Te-Co 41402T ossido nero 1018 acciaio filettato attraverso dado a T, 1/4"-20 TPI, 3/8" altezza x 9/16" larghezza x 3/8" slot tavolo (confezione da 5) 1/4 pollici -20, 3/8 pollici altezza 5
3.4/5

€ 62.61

Te-Co 41402T ossido nero 1018 acciaio filettato attraverso dado a T, 1/4"-20 TPI, 3/8" altezza x 9/16" larghezza x 3/8" slot tavolo (confezione da 5) 1/4 pollici -20, 3/8 pollici altezza 5
3.4/5

€ 62.61

hot
Te-Co 41412T ossido nero 1018 acciaio filettato attraverso dado a T, 1/2"-13 TPI, 3/4" altezza x 1-1/8" larghezza x 11/16" slot tavolo (confezione da 5) 1/ 2"-13 1 1/8 pollici 3/4 pollici 5
3.4/5

€ 53.08

Te-Co 41412T ossido nero 1018 acciaio filettato attraverso dado a T, 1/2"-13 TPI, 3/4" altezza x 1-1/8" larghezza x 11/16" slot tavolo (confezione da 5) 1/ 2"-13 1 1/8 pollici 3/4 pollici 5
3.4/5

€ 53.08

hot
JW Winco KM-2 KM Dado di bloccaggio del cuscinetto, filettatura M15 x 1,0, diametro esterno 25 mm, spessore 5 mm, larghezza scanalatura 4 mm-profondità scanalatura 2 mm (4)
4.1/5

€ 25.65

JW Winco KM-2 KM Dado di bloccaggio del cuscinetto, filettatura M15 x 1,0, diametro esterno 25 mm, spessore 5 mm, larghezza scanalatura 4 mm-profondità scanalatura 2 mm (4)
4.1/5

€ 25.65

hot
HHIP 3900-2110 Kit di bloccaggio con scanalatura a T da 58 pezzi da 3/8" con prigioniero da 5/16-18 e dado a T da 3/8"
3.2/5

€ 158.95

HHIP 3900-2110 Kit di bloccaggio con scanalatura a T da 58 pezzi da 3/8" con prigioniero da 5/16-18 e dado a T da 3/8"
3.2/5

€ 158.95

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu