General Tools Metal Marking Gauge # 820 - Barra singola da 6 pollici

Name: General Tools Metal Marking Gauge # 820 - Barra singola da 6 pollici
Brand: General Tools
SKU: 0971483010292
Price: 40.80 EUR
Availability: InStock

Brand:General Tools

3.2/5

€
40.80

Con il calibro per marcatura di metalli General Tools 820, barra singola è possibile tracciare facilmente il bordo di una superficie piana per lo strappo e il taglio. La barra d'acciaio presenta un righello graduato inciso per effettuare misurazioni accurate. Il tracciatore a punta d'ago segna facilmente legno, plastica, pannelli duri e altri materiali. General Tools è un leader riconosciuto nella progettazione e nello sviluppo di strumenti di precisione specializzati dedicati a fornire un servizio clienti eccezionale. Incoraggiamo artigiani e fai-da-te a lavorare in modo più intelligente, misurare meglio e riparare in modo più produttivo.

Quantity

Aggiungi al carrello Compra subito

EAN: 0971483010292

Categories: Strumenti e miglioramento della casa, Strumenti di misurazione e layout, Strumenti di marcatura, Scribatori,

DUREVOLE: nichelato e resistente alla ruggine, questo misuratore è costruito per un uso costante. PUNTA ULTRA FINE: la punta dell'ago è ultra fine per una marcatura estremamente precisa. VERSATILE: il tracciatore a punta dell'ago segna facilmente legno, plastica, pannelli duri e altri materiali. BARRA SINGOLA: la barra d'acciaio presenta un righello graduato inciso ogni 16 di pollice per misurazioni accurate. SEGNA E SCRIVI PRECISAMENTE: misura, segna e traccia le linee di taglio sulla lamiera in una semplice operazione.

Age Range (Description)	Adult
Batteries Included?	‎No
Batteries Required?	‎No
Brand	General Tools
Country of Origin	‎China
Customer Reviews	4.1 4.1 out of 5 stars 454 ratings 4.1 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎820
Item Package Quantity	‎1
Item Weight	‎3.84 ounces
Manufacturer	‎General Tools
Material	Nickel,Plastic,Metal,Steel
Material	‎Nickel,Plastic,Metal,Steel
Part Number	‎820
Point Type	ultra fine tip
Product Dimensions	‎1 x 1.63 x 6.25 inches
Size	‎1 Count
Style	‎Fine
Tool Tip Description	‎ultra fine tip
Unit Count	1.0 Count
Warranty Description	‎Manufacturer

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Gary c. Janni

Good product for the reasonable price

Marking are hard to read

Scritto da: Silver

Fits the description given. Gotta really tighten it after a few uses.

Scritto da: Ricardo

It’s alright.

Bit expensive for what it is but it’s solid and works well. Set screw is firm so you won’t really have to worry about it shifting on you while you are using it but at the same time I have found that if you put need to swap to a bunch of measurements all the time the hex key set screw will be tedious and the hash marks on the side are hard to see in bright sunlight.

Scritto da: Amazon Customer

It looks and feels like a good tool. But with one big problem the scribe point sucks a@s

The scribe point just won’t leave a mark on cold rolled steel, I have to use blueing to maybe see it barely. It would probably work sort of on copper or aluminum but not for very long.

Scritto da: James R. Starkey

NOT AN ACCURATE TOOL

For basic scribing it will be okay but the ruler on the rod is almost invisible. Use a good ruler. To make it worse and more inaccurate the pin on mine is bent. No biggie, I’ll straighten it. You get what you pay for.

Scritto da: Chunts

Not the best but it works

Not bad for the price. It's a little fussy as the shaft easily rotates which swings the point out of square. Make sure the adjustment screw is against the flat part of the shaft to avoid this. There are very faint marks to measure, but they are not labled, and are all the same size so measuring is a little difficult. I believe the marks are imperial at 1/16"

Scritto da: Henry

Need a second tool to make 1 tool work.

I couldn't trust the accuracy of this thing because tightening the screw with my fingers was apparently not enough, I had to be extremely careful using this to make sure it didn't slide forward or backward making 1/2 inch an inch and a half. If I had a small Allan wrench it would have worked fine I assume, but I didn't.

Scritto da: Gregory Booth

Great scribe but...

The marking pin seems to be loose and keeps falling out every time I try to use this tool. I think it is a great tool otherwise. I ended up using a little dab of 5 min epoxy to get it to stay in place. Works fine now....until it gets dull anyway! Kind of expensive for a throw away but too much involved to try and maintain and/or fix the pin.

Scritto da: jan zciwonadz

better using the old wooden marking gauge to look at.

Scritto da: Steve birch

Quality tool

This product is fantastic, exactly what I required.

Scritto da: Louanne F

It scribes metal

Product Review #907 - I see a lot of geeks using their calipers as a scribe. Do you really want to hurt your poor calipers that way? Much better is a scribe, such as this one. It has a fence/guide and a pointy tip that is used to put a scratch into the material you wish to scribe/mark up. The guide in this scribe can be adjusted with a #4 hex wrench. (not included). The point is sharp and made out of hardened steel. What makes the scribing better on metal is to use a layout fluid (a blue or red ink) - you apply the ink to the surface of the metal you wish to scribe, then scribe the ink. This allows you to see the scribe lines in the ink rather than gouging deep lines in the metal. I bought this scribe from the USED selection from amazon. It was a bit beat up, so I filed it down and cleaned it up. The guide is very soft, appears to be a softer aluminum than the 6000 series and is easily dented / scratched. If you plan to do A LOT of scribing, i'd recommend to go with a more expensive scribe that has a harder material for the fence/guide, as deformations in the guide from prolonged use can cause distortions when scribing lines. Otherwise, this scribe is fine for occasional use if treated with care. DId this help? Let me know by clicking helpful.

Scritto da: Miguel Espindola Castro

Incomodo

No resulta facil de sujetar, ademas el tornillo de apriete esta del mismo lado que la punta, de tal manera que cuando uno trata de tomar una medida sobre la madera, se acomoda la punta sobre la linea, pero el tornillo de fijaciòn queda por abajo también. Ni modo...

Scritto da: JESUS HERNANDEZ

NO LO RECOMIENDO

Si lo intentas calibrar con la mano se va a mover, necesitas calibrar con la mano y al menos el que me enviaron darle un buen apretón con una llave Allen... hubiera invertido en uno mejor. Ni hablar.