GEARWRENCH Portapuleggia universale - 3900 15 pollici

Brand:GEARWRENCH

3.6/5

65.60

GearWrench ha introdotto l'originale chiave a cricchetto a cinque gradi brevettata nel 1996 ed è diventata rapidamente un marchio di riferimento per i tecnici automobilistici professionisti. L'innovazione non si è fermata qui. Anno dopo anno, il marchio GearWrench continua ad espandere la sua linea di strumenti a cricchetto e oltre, per aiutare i tecnici automobilistici e industriali a svolgere il proprio lavoro più velocemente e più facilmente. Avere lo strumento giusto per il lavoro è fondamentale e i tecnici che lavorano in spazi ristretti comprendono meglio di chiunque altro il potere di questa semplice affermazione. Questa vasta gamma è la spina dorsale che conferisce a GearWrench la sua reputazione di velocità, forza e accesso senza precedenti. Il risultato è una maggiore produttività per coloro che tengono gli strumenti GearWrench nella loro scatola.

Camion GM con motori da 4,3 litri, 5,0 litri e 5,7 litri. Dodge Trucks con motori 3.9-L, 5.2-L, 5.9-L, 8.0-L e V10. Le applicazioni per l'uso nella rimozione della frizione della ventola includono: motori Ford Trucks W/2.8-L, 2.9-L, 3.0-L, 4.0-L, 4.9-L e 5.0-L. Se utilizzato in combinazione con le chiavi della frizione della ventola, è particolarmente utile per rimuovere e sostituire i gruppi ventola termostatici. L'esclusivo strumento per risparmiare tempo è progettato per intrappolare e trattenere le pulegge imbullonate dai bulloni di montaggio nella maggior parte delle applicazioni.
Batteries Included? ‎No
Batteries Required? ‎No
Customer Reviews 4.6 4.6 out of 5 stars 718 ratings 4.6 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item model number ‎3900
Item Package Quantity ‎1
Item Weight ‎1.5 pounds
Manufacturer ‎GEARWRENCH
Measurement System ‎English/Standard
Number of Handles ‎1
Part Number ‎3900
Product Dimensions ‎15 x 4 x 0.5 inches
Size ‎15 Inch

3.6

13 Review
5 Star
75
4 Star
14
3 Star
6
2 Star
2
1 Star
3

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Amazon Customer
It’s just a tool
It’s just a toolRepeat a bit too much for this as when you see what it is they charged a bit too much but I just figured if it makes one job easier I can get it done and not bust my back on it
Scritto da: Kenneth Guined
Water pump pully tool
Works as it should
Scritto da: tdsails
Awesome
If you are going to be changing a fan clutch, just go ahead and get this tool. Don't waste your time with all those snake oil ideas from youtube. I used it on my 2016 Ram 2500 with the Cummins 6.7. It easily hooked to the bolts on the radiator fan pulley and held while I used a 48mm wrench and a 16 ounce hammer (took about 3 good solid smacks) to break the nut free. The prep time to get to the nut took longer than getting it broke free and the fan clutch/fan off the motor. Product was well worth the money, even though (hopefully) I won't have to use it again for a very long time. It will save you some time, bloody knuckles and your sanity.
Scritto da: john lewis
Works
Pretty fiddly but works, I think the grooves/hooks could be deeper.
Scritto da: Adam
Mixed feelings
This is a must have to remove the fan clutch but it does slip of easy so you need to be careful. The wrench is very sturdy and you don’t half to worry about bending like cheap wrenches.
Scritto da: Big Baad Brad
Valuable for the removal of the fan clutch
It is fairly easy to use. The difference in the one I rented is that that one had a grooved locking mechanism and the problem with that is those grooves where most people used it wore out. The winning I find not so helpful on this one is that one of the hooks desert come all the way up to grab the bolt it goes around it but not completely or not like the other side does. In the end it didn't actually work for me because my fan clutch nut was unmovable we ended up cutting it off. But I do recommend the tool
Scritto da: Ruby
Shipped fast.
Not easy to use.
Scritto da: Louie Knives
It works
Worked like a charm on my 6.0 LS2. I tried the pneumatic kit but all that did was gouge the nut.
Scritto da: D. Rodríguez
Muy solida pero es mejorable.
Es algo pesada y solida, lo que es algo bueno, pero los pines que tiene para detener el pulley son bastante cortos. Deberían ser un poco más largos para que se puedan usar sin problemas, incluso si inclinas un poco la herramienta.
Scritto da: Jonathan Welch
Will work on a variety of pulleys
I recently used this tool to secure the pulley on a Chevy Trailblazer. The tool is simple to use and I can tell it will work on many different vehicle brands. For the money I think it is a good tool to have in your cabinet.
Scritto da: Michael Houle
Worked for me, but I had to modify the tool.
For my Dodge Dakota 2003, I actually had to hacksaw the tips off of this tool. It was just not going to work for me as is. Oh well, I was happy I got it to fit alongside my pipe wrench to get the nut free. I used this tool on the top side holes and then the pipe wrench fit nicely underneath. HTH.
Scritto da: kobebryan
Not Good!
Not Good!
Scritto da: Ken Johnson
Good product
Saves a lot of time and simple to use.

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart