Freeman PLTHSWVB 1-3/4" Gancio per travi per utensili pneumatici in alluminio con raccordo girevole industriale da 1/4" e boccola in ottone Gancio da 1-3/4" con raccordo girevole da 1/4"

Brand:Freeman

3.3/5

€
37.66

Libera le tue mani e previeni danni agli attrezzi con il gancio per travetti per utensili pneumatici in alluminio Freeman PLTHSWVB 1-3/4 con raccordo girevole industriale 1/4 e boccola in ottone. Compatibile con qualsiasi chiodatrice di marca con raccordo 1/4 NPT, questo leggero gancio in alluminio può essere facilmente fissato a qualsiasi angolazione e rimane in una posizione fissa dopo l'installazione. Il raccordo girevole ruota di 360 gradi per fornire la massima manovrabilità e previene l'attorcigliamento del tubo quando si cerca di lavorare in spazi ristretti. Il design del gancio a forma di L offre una distanza di 1-3/4 dallo strumento per appenderlo facilmente a travi, cinture degli attrezzi o tasche, assicurando che il tuo strumento sia al sicuro mentre sali le scale, posizioni i materiali o ti muovi in cantiere.

Prodotto non disponibile

EAN: 0816376016640

Categories: Strumenti e miglioramento della casa, Utensili elettrici e manuali, Parti e accessori per utensili elettrici, Parti e accessori per utensili pneumatici, Accessori per chiodatrice ad aria,

Il gancio regolabile ruota in modo da poter appendere il tuo strumento ovunque, sia che tu sia destro o mancino. Struttura in alluminio leggera e resistente. Compatibile con qualsiasi marca o tipo di utensile pneumatico con raccordo 1/4 NPT. Include un raccordo girevole a 360 gradi industriale da 1/4 e una boccola in ottone per una facile installazione. 6 ganci per attrezzi lunghi a forma di L offrono 1-3/4 di spazio in modo da poterlo agganciare facilmente a travi, passanti per cintura, tasche o cinture degli attrezzi per liberare le mani in cantiere.

Batteries Required?	‎No
Customer Reviews	4.3 4.3 out of 5 stars 2,150 ratings 4.3 out of 5 stars
Included Components	‎1 Aluminum Tool Hook
Item model number	‎PLTHSWVB
Item Package Quantity	‎1
Item Weight	‎5.1 ounces
Manufacturer	‎Prime Global Products
Material	‎Aluminum
Measurement System	‎Imperial
Part Number	‎PLTHSWVB
Product Dimensions	‎6 x 4 x 1 inches
Size	‎1-3/4” Hook with 1/4” Swivel Fitting

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: dave65

Fit porter cable nailer

Love it but hate that it flops around. A real pain to hang single handed. Will find a way to modify so it doesnt flop around so much

Scritto da: Nic Bassett

Works on my Porter Cable framing nailer

Use this on my porter cable framing nailer and it works great. Very durable. Great price.

Scritto da: 4632210086

Yega bien ????

Esta bien mi esposo le encanta yego antes de la fecha

Scritto da: Bill

Gon hook

Great for hanging nail gun

Scritto da: DIYer

metal too soft

actually, pretty good design overall but metal too soft and rotates too readilly, so you wasting a lot of effort in use. the mount uses its own air inlet couple, so you need to unscrew yours since theirs is permanently attatched to hook. Pretty confident will break couple after 5 drops because it's hard to get hung since it is always spinning. The swivel couple looks good, but when the the hook swivels to the gun handle so does your hose, then your up on a ladder trying to shake both back in position. Bad on 3 counts, but after bending, it'll fall even more. A rigid plastic hand grip mount w some resistance to swivel would be better, but no one making. the air hose mount, being at end is no good because most framing nailers are long, requiring wrist contortions to hang it on rafter or ladder rung....should be placed closer to where hands are.

Scritto da: Algo grande

Bien

Bien

Scritto da: BlueBirdPaintingVa

Be careful screwing it in!

The threads are pretty long, so do not try to screw it all the way in or it will crack the end cap of your nailer. I had to remove the red thread sealant for it to fit my Metabo 16 gauge, it was just a little too tight with the sealant. I also had to cut out a small portion of the plastic for it to fit into the Metabo case ( see pics), but not much more than a silver dollar size. I bought the 1" and wish I would of got the 1 3/4". I can still use the 1 inch to hook onto my tool belt or jeans pocket, but thats about it. Its not deep enough to hook onto a ladder, 2x4,and etc. Quality seems good. Bought two, one for my 16gauge and the other for my 18 gauge. I might get the 1 3/4 for my framing nailer and 15 gauge.

Scritto da: MikeO

Very useful!

I really needed this to hang my nail gun onto my tool belt. It was a good value and was what I was looking for. I'm not sure if it was because I had a cheap nail gun but the thread pitch appeared slightly off as it was a little rough threading it on. It wouldn't thread completely so it was sitting about half way out which in my opinion is not ideal as it's your attachment point for the weight of your gun. If it was fully threaded it would not add as much leverage to the threads. Overall it does its job and has been great at getting up my hands on a 20ft ladder.

Scritto da: Emily Andrew

Good product but needed modification

Product seems good but they went crazy on the thread sealer... For a second I thought they'd sent me an unthreaded fitting but I just scrubbed most of it away and it worked fine. Would give more stars if the product came without the need to modify it.

Scritto da: Jocelyn charest

Excellent

Gagne un temps fou a ne pas deposer l’outil a un endroit convenable et le recuperer quand vient le temps de l’utiliser ! Pas Compliqué tu l’a autour de ta taille et tres facile à accrocher et tres facile s accroché a des trust ou autre !

Scritto da: Michael Cloutier

Great product

I love these things as belt hooks for my air tools. I'm actually removing the factory rafter hooks from my tools and putting these on because they stay on my belt better than the large plastic rafter hooks.

Scritto da: Brandon

Sturdy product

Really sturdy rafter hook. Fits well on my bostitch coil framer. Bought the hook with no fitting. It has a recessed hole so you can slip it between the fitting and the gun while keeping a proper seal at the threads. Way better than the plastic factory ones. And in my opinion, holds/sits better than the pneu hooks.

Scritto da: Steve

Get idea but leaks air

Good concept but unfortunately leaks air badly after 3 days of use