Flash Furniture Sedia da disegno in rete nera trasparente con schienale medio con struttura in oro Melrose e braccioli ribaltabili Sedia da disegno in rete nera/struttura in oro

Brand:Flash Furniture

3.1/5

636.20

Quando trascorri più tempo alla tua scrivania che altrove, è il momento di investire in una sedia di prima qualità. Questa sedia da disegno di alta qualità è costruita con una gamma di sedili più ampia per raggiungere superfici di lavoro che sono al di sopra dell'altezza media della scrivania, come banconi e bar. Progettata per artisti, ingegneri, tecnici di laboratorio e altri professionisti del lavoro creativo, questa sedia da disegno alta offre un supporto per la schiena migliorato per massimizzare la produttività. Caratterizzato da materiale in rete traspirante e imbottitura extra in tutto, questo sgabello da disegno ti aiuterà a mantenerti fresco e comodo durante sessioni di lavoro prolungate. La nostra sedia da disegno ad altezza regolabile si alza e si abbassa senza sforzo all'altezza desiderata tramite una leva di regolazione pneumatica facile da usare, mentre l'anello del piede cromato integrato attorno alla base offre un posto comodo dove riposare i piedi. Il bordo del sedile anteriore a cascata aiuta a ridurre la pressione sulla parte inferiore delle gambe aumentando la circolazione. I braccioli imbottiti si sollevano e si spostano secondo necessità, consentendo di passare rapidamente da un'attività all'altra con maggiore flessibilità. Se lavori a un'altezza della superficie non tradizionale, una sedia comoda è un must, quindi le molteplici funzioni di regolazione di questa sedia da disegno per ufficio saranno un'aggiunta gradita. Il controllo dell'inclinazione sincronizzata consente al sedile e allo schienale della sedia di reclinarsi a velocità diverse, aumentando l'angolo tra il busto e le cosce per una posizione di seduta ideale e lo schienale sagomato con supporto lombare può aiutare ad alleviare la tensione sulla colonna vertebrale e sui muscoli della schiena. La rotazione a 360 gradi abbinata a ruote a doppia ruota e a scorrimento facile consente una mobilità senza sforzo per massimizzare lo spazio di lavoro. Le fuoriuscite si puliscono facilmente con un detergente a base di solvente, non è necessaria acqua. Che tu vada in ufficio o lavori da casa, questa sedia in rete con schienale medio offre una soluzione di seduta pratica e attraente per farti passare comodamente la giornata lavorativa.

MISURE DEL PRODOTTO: Dimensioni complessive: 25 L x 23 P x 42,5-50 A; Dimensioni seduta: 19,25 L x 19 P x 24,5-32 A; Dimensioni schienale: 18,25 L x 21 A; Dimensione del braccio: 31-38,5 H dal pavimento; 6.75H dal sedile. Base in nylon a 5 stelle per impieghi gravosi con ruote doppie, anello per i piedi cromato integrato. Regolazione pneumatica dell'altezza del sedile, regolazione dell'inclinazione sincronizzata bloccabile 2 a 1, manopola di regolazione della tensione dell'inclinazione, sedile a cascata. La nostra sedia è conforme allo standard ANSI/BIFMA X5.1-17: schienale e sedile in rete nera trasparente, design a metà schienale, braccioli imbottiti ribaltabili. Ottieni il massimo dal nostro spazio di lavoro o creativo con una sedia da ufficio alta per adattarsi a diverse altezze del tavolo. Questa sedia da disegno regolabile con braccioli ti manterrà a un'altezza comoda per affrontare la giornata lavorativa e rispettare le scadenze.
Age Range (Description) Adult
Arm Style Adjustable
Assembly required Yes
Back Style Curved
Batteries required No
Brand Flash Furniture
Care instructions S-Solvent based cleaner - no water
Color Black Mesh/Gold Frame
Customer Reviews 4.1 4.1 out of 5 stars 1,713 ratings 4.1 out of 5 stars
Finish Type Polished
Finish types Polished
Form Factor Mesh
Furniture base movement Swivel
Included Components Drafting Stools
Is Discontinued By Manufacturer No
Item model number BL-LB-8801X-D-GG
Item Weight 41 Pounds
Manufacturer Flash Furniture
Material Metal, Mesh, Plastic
Maximum recommended load 300 Pounds
Model Name Flash Furniture
Number of pieces 1
Pattern Solid
Product Dimensions 25"D x 23"W x 42.5"H
Product Dimensions 28 x 28 x 49.5 inches
Recommended Uses For Product Drafting
Room Type Office, Study Room
Seat Material Type Mesh
Special Feature Adjustable
Style Drafting Chair
Tick-repellent material plastic
Unit Count 1.0 Count
Warranty Description 1 year limited.

3.1

10 Review
5 Star
58
4 Star
18
3 Star
9
2 Star
5
1 Star
9

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: RJ
Comfortable and high-quality for the price
I really like the seat and back material because they don't generate static like fabric-upholstered seats do, and yet it is still incredibly supportive and comfortable. The arms flip up which makes the chair versatile. My only complaint is that it was a bit difficult to assemble by myself.
Scritto da: Amazon Customer
Best chair ever!
If you like to work from a tall table, this is your chair! Great back support, comforting supportive mesh and you are able to work without getting fatigued. Love it! My last chair lasted for over 6 years.
Scritto da: muensterDeath
Great chair with a couple complaints.
Bought this chair as I have nearly debilitating sciatica at times, and I work at a work bench as my office in the garage. Its comfortable and doesn't seem to exasperate the sciatica. I would recommend buying it. My negative feedback (I'm 5 foot 9, and 230 pounds, so take that into consideration for the below): 1) It's a little pricey for what it really is. Mostly plastic except for the foot ring and the metal shaft. 2) At first the mesh on the seat pan has a swing upward as it approaches the knee, for those that have larger thighs like I do, it may feel that it's pushing your legs up before the knee and back up the bottom of the thigh some. Some may find this uncomfortable, but over a couple weeks the mesh has stretched a bit and I have gotten used to it and it doesn't seem to affect my sciatica. 3) It can be a little tricky to get in and out of. You really can't put much weight on the ring. 4) Lastly and the largest con for me is, the foot wring will constantly wriggle farther down, so you have to get out of the chair and squat down and try to wriggle it back up after loosening the set screw with black knob. Also the rubber sleeve that makes contact with the metal shaft and the outer area separate, so you have to get those to fully back together. It should be designed to where that does not happen. Either another set screw on the other side to help stay tight, or some for of a locking mechanism. Doing this with sciatica is painful. All in all, nice chair, would recommend. Fix the foot wring from what it's doing though...
Scritto da: CJ
Flatten the curve
It's coming up on the one year anniversary of my purchase of this chair, and I'm very pleased. About a year ago, I purchased this to go with an antique drafting table I'd set up as a hobby work space in my basement. At the time, I was looking for something very affordable, as it would only see occasional use. Little did I know we'd soon be asked to spend the next two weeks working from home to "flatten the curve". Thankfully the product shipped quickly, was packaged very well and was easy to set up, because a couple weeks later that antique drafting table and this chair would become my new office. To my surprise, I'm closing in on a year of flattening the curve, and this chair has held up very well for something I only expected would see occasional use. I've had a bit of a leak in the pneumatic cylinder, but only at the upper end of the stroke. As a result it tends to sink down about an inch from my upper level set point, but it stays firm from there and it's still within a comfortable seating height, so I normally don't notice it. As for comfort, the chair is ergonomically very comfortable with firm back support. My only complaint would be the mesh seating can feel a little rough when you have to sit through long online meetings and decide it's shorts day at "work" that day. Otherwise, I'm very surprise how well the mesh fabric has held up for something in this pricepoint. It feels just as supportive as the first day in my new office, and other that some dust and food crumbs doesn't really show any wear. I may occasionally (every 3 or 4) months tighten the foot ring, but I use it all the time and regularly push off on it to reposition myself. Overall, it's been very sturdy. As we close in on the anniversary of "two weeks to flatten the curve", it looks like I'll be continuing daily use of this chair for some time to come. I expect it to last quite a while yet, but if it failed tomorrow I wouldn't hesitate to order another one.
Scritto da: PMC
Reasonably Comfortable; Good Ajustment; Easily Moved
The chair arrived fairly quickly after I ordered it at a time when products like this were in very high demand among those of us transitioning to working and teaching from home. The box was heavy but easily manageable by a single person. The assembly was relatively easy and straight forward IF you read and follow the instructions and the order of assembly. I found that putting the seat upside down on top of a coffee table and then resting the back on the floor and balancing it against the table made assembly significantly easier than if I had tried to balance the three pieces on their own. The retractable armrests are great. They are comfortable when I am using the chair and retracting them makes it infinitely easier to move the chair around and avoids many unintentional finger or hand jams against the desk. The top height is perfect for a typical high desk, which means that I can use mine either standing, as I often do, or with the chair (which I need when am leading or participating in long ZOOM sessions). The lowest level is a bit higher than a typical desk chair, but it still works for a standard height desk. The bad. I was taken by surprise that the chair is mostly made of plastic. The foot rest, the adjusting center tube and the link between the two parts of the chair assembly are the only metal parts of note. I would have preferred it if the wheeled base was made of metal and thus a bit heavier. The chair has a bit of an unstable feel to it because the wheeled base is relatively narrow and light. That said, I can sit on it for hours of lectures and meetings and have not once felt like I am losing my balance. On balance, at the lower price, a good, flexible chair that you can easily get out of your way when you want to work standing up.
Scritto da: Chris L.
Your back will love you
Love this chair
Scritto da: Mr. Le
For the price, this chair is not comfy.
This chair does not feel comfy. The material used feels like it'll wear out really quick over time. I ended up returning it.
Scritto da: IS
Just like the rest of reviews, mesh pulls off the frame
Very comfortable, but mesh is poorly secured
Scritto da: MikeRyan
Pricey, but worth the investment.
Excellent quality, metal frame with solid white plastic covering, padded arm rests and comfortable mesh fabric? Very comfortable, large travel from low to high position. It is a bit pricey however, worth the cost. I would buy again as I believe the chair will last a long time.
Scritto da: Christian
Expensive for what it is. The low position is too high for a regular desk.
Made me realize that it is most of the time it is better to try something before buying it on internet without trying it.

Prodotti correlati

hot
Sedia da lavoro HON, nera
4.1/5

€ 1194.53

Sedia da lavoro HON, nera
4.1/5

€ 1194.53

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart