Dynamat 11905 Hoodliner 32 "x 54" x 3/4 "di spessore autoadesivo insonorizzante

Brand:‎Dynamat

3.6/5

158.16

100% prodotto negli Stati Uniti. Cosa c'è nella confezione: l'Hoodliner contiene un pezzo di Hoodliner da 32 pollici x 54 pollici (813 mm x 1372 mm). la copertura totale è di 1,11 m2 (12 piedi quadrati). Nota: Hoodliner fornisce il massimo controllo del rumore quando applicato su Dynamat Xtreme. Facile applicazione con adesivo sensibile alla pressione ad alta adesività per l'applicazione a strappo e in stick. 1 mil di Hoodliner. la pelle alluminizzata rinforzata crea una barriera acqua/olio che riflette fino al 97% del calore radiante per proteggere la verniciatura della cappa.

EAN: 0769103119056

Categories: Assistenza sanitaria, Medicina alternativa, Terapia del suono,

100% prodotto negli Stati Uniti. Cosa c'è nella confezione: l'Hoodliner contiene un pezzo di Hoodliner da 32 pollici x 54 pollici (813 mm x 1372 mm). la copertura totale è di 1,11 m2 (12 piedi quadrati). Nota: Hoodliner fornisce il massimo controllo del rumore quando applicato su Dynamat Xtreme. Facile applicazione con adesivo sensibile alla pressione ad alta adesività per l'applicazione a strappo e in stick. 1 mil di Hoodliner. la pelle alluminizzata rinforzata crea una barriera acqua/olio che riflette fino al 97% del calore radiante per proteggere la verniciatura della cappa.
Brand ‎Dynamat
Country of Origin ‎USA
Customer Reviews 4.6 4.6 out of 5 stars 486 ratings 4.6 out of 5 stars
Exterior ‎Smooth
Is Discontinued By Manufacturer ‎No
Item model number ‎11905
Item Weight ‎3.3 pounds
Manufacturer ‎Dynamat
Manufacturer Part Number ‎11905
Model ‎11905
OEM Part Number ‎11905
Product Dimensions ‎35 x 7 x 7 inches
Voltage ‎0.1 Volts

3.6

7 Review
5 Star
76
4 Star
15
3 Star
4
2 Star
2
1 Star
3

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Domenic
Still Sticking
Keeping heat off my hood as I added a 100 watt solar panel to my hood. If the adhesive holds up over time I was be very very happy with product.
Scritto da: Susan W.
Nice Product, Bit Spendy
Used this to quiet down my van engine cover. It installed fairly easy. I used new razor blades to cut it to size. It tended to not cut easily and ripped a few times. I cleaned all surfaces with a degreaser and then alcohol and a couple of spots still didn't want to stick. Ended up using some spray adhesive to complete the project. Am happy with the overall results. Noise was reduced by about half.
Scritto da: LaTanya Brooks
Helpful ????????
The media could not be loaded. Very helpful combined with dynamat in reducing noice from the engine during startup and idle time, stops the constant shaking of my hood and gear shift. Will be finishing the rest of the car after how much I like it. Dynamat is pricey but the tech is patented and it works no reason to consider spending on something like this unless you get the best. Was recommended to stay true to them by a good friend who does car audio professionally. If you get a cheap option you’ll potentially not like it over time or have to replace it and spend extra anyway.
Scritto da: Jake Giddys
????
????
Scritto da: Amazon Customer
This is a MUST for RV owners with doghouse heat issues!!
This is PERFECT for an RV doghouse/engine cover! I saw this mentioned in an RV forum and was about to buy a similar product that was thinner/cheaper but I decided to go with this since the price wasn’t that much difference but the thickness was much better with this product. We have a motor home and the engine cover is between the front seats. It gets VERY warm, especially during the summer months of travel and it’s always noisy, but we mainly really wanted the heart reduction properties. This came in the day of our trip and I decided to try to install it, it was really simple, cutting a piece and sticking it on, then trimming the edges. Our engine cover is an odd custom fiberglass shape, almost like a huge ice scoop. This still confirmed to the curves and edges really easily. It even stuck really well to the existing thin reflective material that was already in place with industrial glue. So the sticky backing is really strong! But most importantly, there is NO HEAT coming from the engine anymore! It’s amazing! I can feel the transition from the base of the engine cover where there is no dynamat, to the engine cover where I installed the dynamat and WOW! I would say there is easily 40° of heat difference at least. There is just zero heat coming from the engine into the cab now. This product is WAY better than I even hoped! I really feel like the engine noise is much better than before too, so that’s an added bonus for us as well! Highly highly recommend this especially for RV owners!
Scritto da: Ossie
Good Product
I modified my 2001 Frontier with intake, header, and exhaust and was able to reduce the noise from the rear by installing FatMat (also a great product for the price) in the rear of the vehicle which worked beautifully, but the noise coming from the engine compartment was another issue. It was starting to become unbearable for short highway drives at 70MPH. In comes this hoodliner. The price was right on Amazon ($58 vs $80+ everywhere else), installation was a breeze (ensure the surface is clean prior to application), and the difference was amazing!!!!. I'd recommend this product to anyone that has modded their vehicle's intake system and those whose vehicles did not come or do not have a hoodliner. The only thing negative is that the white lettering flaked off as I was using my hand to apply the liner to the hood. I also need time to assess if the adhesive material maintains its bond to the hood. Only time came tell so expect a followup to this review. Onto the Fatmat: I purchased a roll from them 3 years ago for appox $80 and have covered all 4 doors on my 04 crv's w/ 2 layers, covered my crew cab frontier's: headliner, floor pan, 4 doors w/ 1 layer (I had already lined them with Dynamat which cost me about $100 for one layerof sound deading per two doors, you see the cost difference). behind and under the rear seat w/ 2 layers, and I still have enough material for the doors on my 300 ZX. I do not want to know how much that would have cost me if I would have used Dynamat throughout my vehicles. Dynamat brags that it is thicker than Fatmat and that maybe true, but their door kit goes for $80 and only covers 2 doors ( and that is a front door and the smaller back door and you have to be creative in reusing the leftover material from the front door). For $80 I was able to do the above, allping 2 layers where needed and I still have material left over. Just food for thought!
Scritto da: Jarry
Better over time
I always take time to thoroughly test and use the item before an honest review. I used this product on our class A motorhome "dog house" to deaden noise and reduce heat. I installed it during the off season so it took a few weeks before using it. Our last use of the motorhome was last fall so it had been 6 months between uses. Not having keen memory of the noise the motorhome produced before installation my immediate response was it sounded better. It became very clear on our first trip when we realized how much easier my wife and I could talk when we were driving down the road. It was very significantly better! It also greatly reduced driving fatigue and tension that builds from engine noise during interstate and hill climb driving. At the end of the day I was very appreciative of the sound deadening this product provided. I could not fully verify reduced heat yet as our northeast temperatures are not yet hot but we did have an 80+ degree day driving with no heat from the engince compartment. This stuff really works!

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart