Danco, Inc. Leva serbatoio WC per Mansfield Chrome (80371)

Name: Danco, Inc. Leva serbatoio WC per Mansfield Chrome (80371)
Brand: Danco
SKU: 0037155803712
Price: 30.90 EUR
Availability: InStock

Brand:Danco

3.4/5

€
30.90

DESCRIZIONE DEL PRODOTTO Questa maniglia per WC Danco può aggiungere un nuovo tocco elegante ed elegante al tuo bagno, risparmiando anche acqua e denaro impedendo un WC in esecuzione a causa di una maniglia usurata. È progettato per sostituire le maniglie dei WC Mansfield. La maniglia è rifinita in cromo per completare un nuovo look e rendere il tuo bagno il migliore possibile. DAL PRODUTTORE Danco è uno dei maggiori fornitori di riparazione, sostituzione e ristrutturazione di impianti idraulici nel settore del miglioramento della casa. Ci concentriamo principalmente sull'offrire ai consumatori fai-da-te soluzioni e prodotti idraulici a prezzi accessibili che creano decorazioni nuove e rinfrescanti per bagni e cucine.

Quantity

Aggiungi al carrello Compra subito

EAN: 0037155803712

Categories: Strumenti e miglioramento della casa, Impianto idraulico grezzo, Parti della toilette, Leve di azionamento del WC,

Consumo di acqua: 5,0 gallons_per_flush. FACILE DA INSTALLARE - La facile installazione lo rende un perfetto progetto fai-da-te per chiunque desideri sostituire una maniglia del water. FINITURA CROMATA - La maniglia a leva ha un'ottima finitura cromata lucida per completare i sanitari esistenti. LUNGHEZZA DEL BRACCIO DA 10 POLLICI - Con una lunghezza massima del braccio a filo di 10 pollici, questo può adattarsi molto facilmente alle tue esigenze. COSTRUZIONE DUREVOLE - Con un manico in plastica resistente e durevole con struttura a braccio in metallo, questa leva del serbatoio durerà. CAPATIBILITÀ - Con un riferimento OEM n. 42, questa leva del serbatoio può essere utilizzata per le valvole di scarico Mansfield n. 160, n. 210 e n. 211. Sono destinati a funzionare con una valvola di scarico del tipo a canestro. La leva NON è destinata all'uso con applicazioni di valvole di scarico a catena e a cerniera.

Batteries Required?	‎No
Brand	Danco
Brand	‎Danco
Color	Chrome
Color	‎Chrome
Customer Reviews	4.4 4.4 out of 5 stars 434 ratings 4.4 out of 5 stars
Exterior Finish	Chrome
Exterior Finish	‎Chrome
Finish	‎Polished
Finish Type	‎Polished
Handle Type	‎Lever
Included Components	‎Danco, Inc. Toilet Tank Lever for Mansfield Chrome
Is Discontinued By Manufacturer	‎No
Item model number	‎80371
Item Package Quantity	‎1
Item Weight	‎0.25 Pounds
Item Weight	‎4 ounces
Manufacturer	‎Danco, Inc.
Material	Plastic
Material	‎Plastic
Number of Handles	‎1
Number of Items	‎1
Package Type	‎Standard Packaging
Part Number	‎80371
Product Dimensions	4.4"L x 1.7"W
Product Dimensions	‎4.4"L x 1.7"W
Unit Count	‎1.0 Count
Voltage	‎120 Volts
Warranty Description	‎Limited 1 Year
Water Consumption	‎5 Gallons per Flush

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Mr.

It worked. Had to cut and bend it to fit. Wife and kids are happy.

Scritto da: JB

Perfect fit for my Mansfield 162 tank

After the existing blue plastic toilet handle broke, I needed a new handle to keep the toilet going. This Danco toilet tank lever was a perfect fit to go into the unique tea-cup flush-valve (210) used by Mansfield Toilet tanks. While installing this specific handle, remember a few things: (a) The nut that attaches the lever to the tank body twists in the reverse direction. (b) In order to make the metal lever go through the tea-cup handle, do no screw the lever to the tank body first. In the beginning, keep the lever loosely attached, then unscrew the flush valve top, pull out the tea-cup from the valve stem, pass the metal lever through the tea-cup handle, then put the tea-cup back on the stem, and finally screw the nut of the lever into the tank body. Unlike other reviewers, I did not need to cut the metal lever for tank# 162. This is an elongated tank, and the lever is the perfect size. Another think worth noting: if you are replacing the existing lever because it broke, it may be time to check and replace the flush valve seal as well. It is very easy to replace, and Korky sells it for about 1 dollar.

Scritto da: Andrew

Works but requires some bending

Purchased this for my Mansfield 35, older style toilet. It’s hard to find Mansfield parts that fit as advertised and are good quality. Went to install this one and it will fit a 35, but control arm is a little too long. Luckily the brass arm is able to bend, so bent is shorter to fit in and then bent it back. Wire cutter would have worked fine too but didn’t have one handy. Long story short, the bendable brass is a good feature, don’t bother with the plastic ones that don’t bend or must be heated to fit

Scritto da: Mathew Boban

Acceptable replacement, hopefully more durable

I installed this on a 1979 Mansfield 51; replacing the blue plastic #42 trip lever which had snapped in half. Installation was simple - you don't need to dismantle the valve body or cut the metal lever - just bend the metal part temporarily so that you can angle it through the hook on the valve body and then bend it back when you have the push handle secured. Don't forget to thread the locking washer between the cistern wall and the valve assembly before doing this. . Hopefully will be more durable long term. Unlike the original part, the lever and the push handle aren't secured to each other - rather there's more of a cam arrangement in the silver handle. This does make the handle feel a bit more wobbly than the original, regardless of how tightly you screw down the locking washer.

Scritto da: Tien Jo So

If your OEM was Plastic go with Plastic

This says it fit a Mansfield 160 but you need to consider the valve. Don't make my mistake and think they're all universal. You'll have to bend, twist maybe even cut this to fit. Hard to review so I gave it a down the middle.

Scritto da: Charles O.

Manufacturing tolerances are loose

This is a great replacement for the plastic arm levers. I had to cut this and bend to fit the Mansfield 160. I bought 3 in total and 2 work great. Much better than the plastic arm which breaks over time. The third replacement that I bought seems to have looser tolerances than the other two. I'm still trying to make some more bends to correct for this. I I may need to order another replacement arm. My final advice is to stay away from junk Mansfield toilets with plastic flush levers. Just spend the money and get a Kohler or Toto instead. Then you won't have to spend time fixing what should have never broken in the first place.

Scritto da: kayaker

Cut to length, install, and this one cleared my toilet lid

So when I moved in, my original handle (which may not be THE original) would hit the seat lid and not always return to normal. This resulted in the toilet running continuous, until one moved the seat forward so it could pop up all the way. My handle was shaped differently as you can see in the pictures. This one looked like the one on my other toilet, so I ordered it. Cut about 3" off the brass rod, installed, and it ended my troubles.

Scritto da: Esau

Had to cut a piece

Like others have mentioned, I had to cut a piece to make it fit, otherwise, the quality is good and it fits perfectly. I rather have to cut a piece, than having the lever being too short

Scritto da: Allan Cowling

It fit and it worked that's good enough for me.

It fit and it worked.

Scritto da: jackie houston

I’m so happy I found this!

I was so tired of replacing the plastic handle every year or two so when I saw this I decided to give it a try. It fit perfectly, was easy to install and its metal so I could feel the difference as soon as I put it in! I totally recommend, you won’t regret it!

Scritto da: Amazon Customer

Universal fit, perfect fit for older toilets

Really easy to install and so much better because it is Chrome & metal! I used this to replace an old plastic one , in a older style toilet , and it fit perfectly. You can’t beat the price . I read the reviews for installation tips and replaced it in less than 5 minutes.