Cuscinetti per barche BoatBuckle, confezione da 2 da 1 pollice

Brand:BoatBuckle

3.6/5

35.60

Misura 1 pollice. Confezione da 2 tamponi. Protegge la finitura della barca dalle fibbie. Imbottitura per l'ancoraggio dello specchio di poppa o della falchetta.

Prodotto non disponibile
Misura 1 pollice. Confezione da 2 tamponi. Protegge la finitura della barca dalle fibbie. Imbottitura per l'ancoraggio dello specchio di poppa o della falchetta.
Brand BoatBuckle
Fastener Type Buckle
Number of Pieces 2
Size 1-Inch
Vehicle Service Type Boat

3.6

12 Review
5 Star
75
4 Star
15
3 Star
6
2 Star
2
1 Star
2

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Denton Newman Jr
Perfect
I ordered these boat buckles padsto keep from having my rachet straps fraying from contact with the metal on my aluminum fishing boat. I chose the 1” width straps and found that it appears they could even be used with up to 1 3/4” straps. Plenty of choices for my use. I have the 2” wide boat buckles pads I have used on wider rachet straps to hold my aluminum canoes down on my trailer for over ten years now, no discoloration and still pliable!
Scritto da: Alex
Great product, great value
I have a PWC and first I wasn’t sure it would not work but I’m glad I purchased it because it works great and I don’t worry about my PWC getting scratched!
Scritto da: KEL
JUST WHAT I WANTED
PERFECT
Scritto da: Stoughton Tumblers
Works great and great price!
Great addition to the boat to protect it from strap indents.
Scritto da: john boyte
Flexible and well made
Perfect for protecting gel coat at the rub rail, if you use an across the gunnel tie down strap.
Scritto da: Dennis Eisenbraun
Pads
Like product
Scritto da: Georgejr
Not hard/brittle, protect straps from angle holds on transom. Holding up well.
Work great in conjunction with boat buckle straps. Make sure you research and get the right size. I've had no problem with slipping down or cutting in even with a sharp angle caused by extended transom on my 2014 Crestliner Sportfish SST where SST is space saving transom which puts the outboard and hold down points 1 ft behind the reg transom which was the reason I purchased these pads due to the sharp welded angle the straps are on.
Scritto da: Maudsquad
Good product...but be careful when you choose a size!
ONE PROBLEM: If you buy the 2" model, don't expect them to work on a 2" tie-down. The 2" model would work for a 1" tie-down. The 3" model would work for a 2" tie-down. Not expecting that, I purchased the wrong size. The listing is a bit misleading. Amazon's return service is pretty decent, though, so I have the correct size on its way at no extra expense to me. Aside from that, these are just what I need for my project. Good construction and decent materials.
Scritto da: Ellen
Order t(e next size up for the width of your strap!
Bought a set of 2” pads for my 2” transom straps. Whilst they do fit on the straps nicely, they were a @#$& to get over the transom hooks on the end of the straps. Needless to say they are not going to fall off by themselves. If it will require replacement down the road, I would probably buy the large size next time.
Scritto da: geolog
they work well in holding my boat down on trailer
So far the product has been great on some of the worst roads to take a boat, they have held the boat to the trailer and prevented it from moving off the bunk supports. They perform even when wet after unloading and reloading the boat. Very easy to install and use. to tie down boat takes only seconds.
Scritto da: Amazon Customer
Fits Great
Prevents any rubbing of strap against the boat.
Scritto da: Amazon Customer
Fits Great
Protects strap against wear and tear.

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart