Coppia di staffe per altoparlanti da scaffale per home theater girevoli per montaggio a parete Rockville RHSB8, altoparlanti da scaffale neri

Brand:Rockville

3.5/5

€
92.81

L'RHSB8 di Rockville è una staffa universale per altoparlanti con montaggio a parete. Questo si adatta a qualsiasi altoparlante da scaffale o monitor da studio o altoparlante surround fino a 12 pollici di larghezza e 13 pollici di profondità. La staffa può essere regolata da sinistra a destra per accogliere altoparlanti grandi o piccoli. Include una copertura decorativa in lamiera nera che rende l'installazione professionale nascondendo i cavi e nascondendo anche le viti di installazione. Puoi ruotare la staffa di 180 gradi a sinistra oa destra in modo da poter puntare l'altoparlante in qualsiasi direzione desideri. Ha anche un'opzione di inclinazione di 10 gradi. I cuscinetti isolanti antiscivolo eliminano le vibrazioni indesiderate e impediscono anche che l'altoparlante si graffi. Include: coppia di supporti per altoparlanti (per 2 altoparlanti) hardware di montaggio e istruzioni di installazione Caratteristiche: coppia Rockville RHSB8 staffe per diffusori home theater girevoli per montaggio a parete bel design senza viti visibili i morsetti laterali sono regolabili da 5,5" a 12" girevoli di 180 gradi da destra a sinistra inclinabili fino a 10 gradi progettati per altoparlanti da 5,5" a 12" di larghezza e fino a 13 ” Peso massimo della costruzione in acciaio per impieghi gravosi e profondi: 40 libbre. Misura universale per qualsiasi diffusore da scaffale, monitor da studio, diffusori audio surround, ecc. Fori per viti opzionali sui morsetti laterali per una maggiore stabilizzazione installazione rapida e semplice la struttura in acciaio di grosso calibro con rivestimento cosmetico fornisce resistenza e durata cuscinetti isolanti antiscivolo inclusi 40 libbre. Misura universale per qualsiasi diffusore da scaffale, monitor da studio, diffusori audio surround, ecc. Fori per viti opzionali sui morsetti laterali per una maggiore stabilizzazione installazione rapida e semplice la struttura in acciaio di grosso calibro con rivestimento cosmetico fornisce resistenza e durata cuscinetti isolanti antiscivolo inclusi 40 libbre. Misura universale per qualsiasi diffusore da scaffale, monitor da studio, diffusori audio surround, ecc. Fori per viti opzionali sui morsetti laterali per una maggiore stabilizzazione installazione rapida e semplice la struttura in acciaio di grosso calibro con rivestimento cosmetico fornisce resistenza e durata cuscinetti isolanti antiscivolo inclusi

Prodotto non disponibile

EAN: 7753664092197

Categories: Elettronica, Accessori e forniture, Monti, Supporti per altoparlanti,

Cuscinetti isolanti antiscivolo inclusi. La costruzione in acciaio di grosso calibro con copertura cosmetica offre resistenza e durata. Fori per viti opzionali sui morsetti laterali per una maggiore stabilizzazione. Installazione facile e veloce. Misura universale per qualsiasi diffusore da scaffale, monitor da studio, diffusori audio surround, ecc.. Costruzione in acciaio resistente. Peso massimo: 40 libbre. Progettato per altoparlanti da 5,5 a 12 di larghezza e fino a 13 di profondità. Girevole di 180 gradi da destra a sinistra. Inclina fino a 10 gradi. I morsetti laterali sono regolabili da 5,5 a 12. Bellissimo design senza viti visibili. Coppia di staffe per altoparlanti home theater girevoli per montaggio a parete Rockville RHSB8.

Brand	Rockville
Brand Name	‎Rockville
Color	Black
Color Name	‎Black
Compatible Devices	Monitors, Speakers
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 591 ratings 4.5 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item model number	‎RHSB8
Item Weight	‎5 pounds
Mounting Type	Wall Mount
Product Dimensions	‎9.7 x 6 x 8.9 inches
Special Feature	Easy
Special Features	‎Easy

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: HonestReview1955

Substantial, Nice finish, and Easy to install.

Mounted to sides of my entertainment stand. Used my own screws to attach because fasteners provided with most items like this are not optimal. Speaker shown in RSL CG23 and weigh 10 lbs. Stands support them easily. Tension adjuster allows stand/ speaker to articulate in different directions and stays put where positioned. Stands hold speakers snugly and I don't worry about them falling off when sliding entertainment stand out to (frequently sigh...) to rescue dog toys and Roomba (whose battery loves to die behind the stand!) I'd def buy again.

Scritto da: crazyd33

Worked exactly like I needed it to

This was a perfect fit for what I needed it for. It went on the out side of my metal shop under my awning and it was nice to have the vertical mounting. Good product.

Scritto da: Carrie

!!! Warning -- get different anchors / screws!!

The media could not be loaded. Love love love the look and functionality of these speaker mounts. However, the provided screws and anchor are a safety hazard – on my first install, the anchor didn't stay in the wall. I figured the holes were too big, and tried again (with the extra set of anchors provided). This time, the screw slips right out of the anchor. Major problem when you're hanging relatively heavy speakers, right above my computer no less. Taking the advice of other comments and just buying better anchors/screws, and hoping I can patch these giant holes in my wall.

Scritto da: Gregory A. Moore

Only need a few tools.

Looks great and very easy to install. I installed all four in under an hour.

Scritto da: GioVanni Spallanzani

Great!

I bought these from Amazon as (used, but good) and they came in excellent condition, everything was there and it took like 5 minutes to install these. Making sure both the mounts were aligned with each other was the hardest part but I has tools for that. They are sleek, useful, hold the monitors in place and quite the bargain. Also being able to maneuver around the studio monitors is very useful. 10/10

Scritto da: Christiaan Muñoz-Salas

Way stronger than I expected!

I bought a pair of these (Rockville RHSB8 Wall Mount) to mount my Klipsch R-51PM Powered speakers. These speakers are on the heavy side, and these wall mounts get the job done really well. Would definitely recommend!

Scritto da: Jake Socks

Mounts are good. Hardware not so much

Used these to hang a pair of klipsch rp500sa to get a steeper angle. I do like how it has a threaded hole and included bolt so u can hang standard keyhole speakers on them easily. However the included lags strip extremely easy. They are Philips head but also hex head however u can't drive them with a ratchet since holes are recessed.

Scritto da: Amazon Customer

Looks great

Fairly easy to assemble and mount. I wish the package came with other wall inserts. The ones that come in the package are great for mason work. They don't work so well for sheet rock. I had to use some wall inserts I already had to mount the speaker mounts to my sheet rock walls. Other than that, great product.

Scritto da: Rick X.

Nice looking speaker mounts

I purchased these mounts as I didn't want to have to drill holes into my surround speakers. These ones worked well as I was able to set the speaker on the base. The covers for the mounting bracket give it a nice clean look. The tilt and swivel work very well and allowed me to aim the speakers just as I wanted. The only problem I had was with the mounting hardware. The lag bolts just couldn't bite into the plastic wall anchors enough to hold the bracket tightly to the wall. I pulled out the plastic anchors and used my own all metal hollow wall anchors. Worked great. If you watch the video for the installation they say to use a 3/8 drill bit for the anchors. That would have been waaay too big for the anchors that were in the box. Double check for your anchors before drilling a hole that's too big.

Scritto da: Kirk Le Blanc

Easy to Install - Hopefully they'll hold up.

Needed to wall mount a pair of fairly large monitors (see picture). These wall mounts said they could handle both the size and the weight so I went with them. Having done a fair number of these before (and not being a particularly trusting soul) I installed both of them into studs and used heavier screws. Installation was no problem, so as long as I don't come into my office one day and find a speaker and drywall dust on my desk I'm very happy with them. :)

Scritto da: John Kroeker

Very sturdy

Except or a small plastic piece between the wall mount and the speaker platform, these speaker mounts are made of sturdy metal. I'm using them to hold a pair of 5.5" studio monitor speakers and they handle them with ease.

Scritto da: Bill

Sturdy and Adjustable Wall Mount for Heavy Speakers

I used these wall-mount stands for my monitor speakers that each weighed 31 lbs. I used a stud finder to ensure I secured the mounting bracket to the stud. It was easy to level the wall bracket due to the well designed screw slots that allowed the bracket to be properly adjusted. The speaker brackets fit well onto my 10.5inch speaker. They tightened very well and kept the monitor speaker well secured. There is a wing-nut assembly that attaches the speaker bracket to the wall bracket that allows for adjusting the angle of the speaker. It worked well.

Scritto da: Amazon Customer

Slightly expensive, but worth it!

Needed strong mounts that could turn and tilt down, as they are in upper corners for my heavy rear surround speakers. They were easy to install and I have no fear of them ever coming loose or breaking. Thank you Rockville! I searched a ton to find something suitable, and narrowed it down to these. With my speakers I could not attach the piece that screws into the speaker that the mount slides into, but I didn't have to, since I was able to utilize the existing bolt hole in the back of my speakers with that of the main part of the mount, using the original bolt that came with my speakers. I did have to file off just a tad from the mount hole to make the bolt fit through, but easily done. I'd feel better if I could utilize that other part of the mount, but my speakers are sealed and I didnt want to potentially harm anything inside them with screws when I didnt need to. Once attached, the adjustment works great too. It can fully turn sideways with my speakers that are 4.5" wide, and it tilts down further than I even need it to, from being just below my ceiling. Very pleased!