Bypass dell'illuminazione a filo diretto, corregge lo sfarfallio della luce per interruttori dimmer intelligenti UltraPro, Enbrighten e Jasco, 52327, bianco

Name: Bypass dell'illuminazione a filo diretto, corregge lo sfarfallio della luce per interruttori dimmer intelligenti UltraPro, Enbrighten e Jasco, 52327, bianco
Brand: Jasco
SKU: 0030878523271
Price: 28.13 EUR
Availability: InStock

Brand:Jasco

3.5/5

€
28.13

Ottieni il massimo dai tuoi dispositivi intelligenti con Jasco Direct-Wire Lighting Bypass. Se utilizzato con dimmer non neutri (52252) o altri interruttori e dimmer intelligenti, il dispositivo capacitivo raggiunge un funzionamento ottimale delle luci collegate. Funge da carico fittizio con lampadine LED o CFL a bassissimo wattaggio per aiutare a prevenire lo sfarfallio e ridurre la dispersione di corrente. Con varie opzioni di installazione, il bypass supporta una vasta gamma di configurazioni di cablaggio e configurazioni domestiche Ottieni il massimo dai tuoi dispositivi intelligenti con Direct Wire Lighting Bypass di Jasco. Se utilizzato con dimmer non neutri (52252) o altri interruttori e dimmer intelligenti, il dispositivo capacitivo raggiunge il funzionamento ottimale delle luci collegate. Funge da carico fittizio con lampadine LED o CFL a bassissimo wattaggio per aiutare a prevenire lo sfarfallio e ridurre la dispersione di corrente. Con varie opzioni di installazione, il bypass supporta una gamma di configurazioni di cablaggio e configurazioni domestiche.

Prodotto non disponibile

EAN: 0030878523271

Categories: Strumenti e miglioramento della casa, Elettrico, Interruttori e dimmer, Interruttori a muro, Interruttori dimmer,

Design compatto: la costruzione salvaspazio consente il posizionamento dietro dispositivi intelligenti in scatole di commutazione affollate. Ampia compatibilità: funziona con dimmer non neutri e altri dimmer intelligenti e interruttori per controllare LED e CFL. Opzioni di installazione: accetta configurazioni a due e tre fili, nonché il posizionamento dietro controlli intelligenti o sotto pensiline di apparecchi di illuminazione e una moltitudine di altre installazioni. Prestazioni migliorate: fungendo da carico fittizio, il bypass garantisce il corretto funzionamento delle luci a bassissimo wattaggio per aiutare a prevenire lo sfarfallio e ridurre la dispersione di corrente. Dimmer senza neutro – Ideale per l'uso con dimmer senza neutro (52252) per eliminare lo sfarfallio dell'illuminazione. Il bypass supporta l'installazione in quadri elettrici con e senza filo neutro.

Batteries Required?	‎No
Brand	Jasco
Brand	‎Jasco
Color	White
Color	‎White
Country of Origin	‎China
Customer Reviews	4.4 4.4 out of 5 stars 45 ratings 4.4 out of 5 stars
Included Components	‎Direct-Wire Lighting Bypass
International Protection Rating	IP00
International Protection Rating	‎IP00
Item Dimensions LxWxH	0.6 x 3.55 x 5.3 inches
Item Dimensions LxWxH	‎0.6 x 3.55 x 5.3 inches
Item model number	‎52327
Item Package Quantity	‎1
Item Weight	‎0.493 ounces
Manufacturer	‎Jasco
Number of Items	1
Number of Items	‎1
Part Number	‎52327
Product Dimensions	‎0.6 x 3.55 x 5.3 inches
Switch Style	Dimmer Switch
Switch Style	‎Dimmer Switch
Unit Count	1.0 Count
Unit Count	‎1.0 Count

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Virgil G Skinner

Works with No-Neutral switches that will not operate with some LED bulbs

In addition to adding additional load to fix flickering dimming on LED bulbs, will also work on cases where no-neutral smart switches will not power up / operate correctly when some LED bulbs are in the socket. Works as a additional load bypass for LED bulbs. It will even allow a no neutral smart switch to power up with NO bulb in the socket.

Scritto da: Amazon Customer

Fixed LED "ghosting" (when switch is off but light dimly glows)

My common cheap LED ceiling light worked fine until I installed a Lutron Caseta smart switch, then it would glow while off. Installing this little thing to the black and white wires coming out the ceiling light solved the problem. I searched all over google and the only ridiculous solution anyone provided was to wire a little incandescent bulb into the ceiling and hide it there to soak up residual energy. So glad this product exists!

Scritto da: Christophe

Fixed my LED not shutting off with Inovelli Blue smart switch (neutral)

My Inovelli Blue smart dimmer (neutral) did not shut off my LED sconces correctly; some remnant current always created a faint glow. I placed the bypass behind the switch between the neutral and the load. That's it! Full shutdown. I still had to adjust the dimmer minimum setting to avoid flickering.

Scritto da: E. P.

Necessary for electronic switches with no neutral and LEDs

I'm using it with a Homeseer dimmer/switch within an old wiring with no neutral and a 12W LED ceiling light. Because the light doesn't provide enough current back to the dimmer to piggyback so it can work, the light flickered badly on and off before adding this. This is a small resistor that solves this problem and in my case, wired it parallel to the light fixture (same cables as the light fixture). This brand (Jasco) is a known US company that is well known in retail stores, although they are usually sold under license from other major brands (GE, Philips, etc). This bypass was cheaper than others and works as well.

Scritto da: Tom F.

Fixed flash with LED lights with lutron caseta system

I was worried I would have to rip out my led can lights that are running on the caseta system. They flash at max brightness when the dimmer is slowly bringing the lights up from being off. I connected this into the switch and it worked great. Lights are smooth with no flickering or flashing. Saved a lot of frustration!

Scritto da: Colorado Rockies

Well, It Is What It Is

It came with two wires, the correct and optimal number of wires, and it does what it says it does - albeit the instructions could use some improvement (fortunately I had installed competing devices before so I already knew what needed to happen.

Scritto da: Zaq Thompson

Try this first

Go to the jasco GitHub and downgrade the firmware. The older firmware fixed my flickering issue with no need for an added resistive load.

Scritto da: Online Shopper

Works with Lutron Caseta dimmers. Solved the flash issue for me.

I recently switched out Halo canister-recessed lightings with more modern recessed lightings. After installing the new recessed lighting, I noticed an issue where the light flashed, immediately turned off, and then back on again. The previous recessed lights didn't display the issue the new lights were having. Searching Amazon I ran across this lighting bypass and decided to give it a try. The bypass solved the flashing issue. It was easy to install and small enough to fit inside the jbox that that came with the recessed lighting.

Scritto da: Bernard Dery

Removed flicker with my LED fixture and an Enbrighten dimmer

What's to add? I have Hilo Enbrighten dimmers, and with some fixtures there was flickering below roughly 65% of output. Thanks to this small load resistor, I can dim fully without problems.

Scritto da: Shawn

Completely useless

Installed with a smart switch per instructions between the neutral/bypass and the load/bypass, and it did absolutely nothing in eliminating nor reducing the flickering in the dimmer. Seems like a complete useless item to me. Like buying snake oil.