Anderson Metals - 56123-0806 Raccordo per tubi in ottone, nipplo esagonale ridotto, tubo maschio da 1/2" x tubo maschio da 3/8" 1/2" x 3/8" 1

Brand:Anderson Metals

3.6/5

€
30.00

Il raccordo per tubo con nipplo esagonale ridotto Anderson Metals è realizzato in ottone e presenta connessioni filettate maschio National Pipe Taper (NPT). Questo raccordo per nipplo esagonale riduttore ha un'estremità più piccola dell'altra per il collegamento di due tubi filettati con diametri diversi e ha una testa esagonale per una maggiore superficie di appoggio durante la regolazione del raccordo con una chiave. Ha filettature maschio NPT per il collegamento a tubi filettati femmina, creando una tenuta più stretta rispetto alle filettature diritte. Questo raccordo è realizzato in ottone per resistenza alla corrosione, duttilità alle alte temperature e bassa permeabilità magnetica. L'ottone può essere collegato a rame, ottone, plastica, alluminio e acciaio saldato. Le temperature di esercizio per questo raccordo vanno da -53 a 121 gradi C (da -65 a 250 gradi F). Questo raccordo soddisfa le specifiche B584 dell'American Society for Testing and Materials (ASTM) e dell'American Society of Mechanical Engineers (ASME)/American National Standards Institute (ANSI) B16 per la garanzia della qualità. I raccordi per tubi sono componenti utilizzati per collegare, terminare, controllare il flusso e cambiare la direzione delle tubazioni in molti settori diversi. Quando acquisti raccordi per tubi, considera l'applicazione, poiché ciò influirà sul tipo di materiale, sulla forma, sulle dimensioni e sulla durata richiesta. I raccordi sono disponibili filettati o non filettati, in molte forme, stili, dimensioni e programmi (spessore della parete del tubo).Anderson Metals produce raccordi, valvole e nippli in ottone. L'azienda, fondata nel 1951, ha sede a Kansas City, MO.

Quantity

Aggiungi al carrello Compra subito

EAN: 0719852920380

Categories: Prodotti industriali e scientifici,

Questi raccordi contengono piombo e la legge federale non ne consente l'installazione per l'uso di acqua potabile negli Stati Uniti e nei suoi territori. Nota: fare riferimento alla tabella delle dimensioni del tubo o della filettatura prima di ordinare. Soddisfa le specifiche ASTM B584 e ASME/ANSI B16 per la garanzia della qualità. Le temperature di esercizio vanno da -53 a 121 gradi C (da -65 a 250 gradi F). Ottone per resistenza alla corrosione, duttilità alle alte temperature e bassa permeabilità magnetica. Filettature maschio National Pipe Taper (NPT) per il collegamento a tubi filettati femmina, nipplo esagonale di riduzione per il collegamento di due tubi filettati con diametri diversi. Nota: le dimensioni dei raccordi per tubi si basano sulla dimensione nominale del tubo. Per determinare la dimensione corretta è necessario misurare il diametro esterno della filettatura e selezionare la dimensione del tubo sopra quella che corrisponde al diametro esterno della filettatura. dimensione sulla tabella delle dimensioni dei raccordi per tubi.

Brand	Anderson Metals
Color	Brass
Connector Type	Nipple
Country of Origin	USA
Domestic Shipping	Item can be shipped within U.S.
Exterior Finish	Brass
International Shipping	This item can be shipped to select countries outside of the U.S.
Item model number	56123-0806
Item Weight	0.11 Pounds
Manufacturer	Anderson Metals
Material	Brass
Number of Pieces	1
Package Dimensions	3.58 x 2.36 x 1.46 inches; 1.76 Ounces
Size	1/2" x 3/8"
Thread Type	Connecting to Female Threaded Pipes

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Wilson

EXACTLY WHAT I AM LOOKING FOR

This is exactly what I am looking for. Very satisfy.

Scritto da: Octavius

Perfect for Weber Grill or Ooni pizza oven

I got my Weber Genesis II grill setup the other day, then realized the quick connect it comes with is not ready to attach to my stub. God knows why they do this, but they send you a quick connect with 3/8 female NPT threads, when most homes have female 1/2. Why they don't ship it with a 1/2 male connection is a mystery. I remember 2 years ago when I bought my dad his grill that he had the same issue, but assumed at the time it was because their house was 40 years old and nonstandard. So anyway, I ordered this and some Teflon/PTFE tape for same day delivery, since weirdly no one in town stocks this connector. Make sure not to use the white stuff, it's way too thin and would require too many wraps to make a proper seal. Technically if you're following code, you'd need pink since it's spec for gas piping with 1/2" threads and over, but I'm sure yellow would be fine. The yellow stuff is cheaper at your local hardware store, but I just got my tape with the connector since it wasn't worth an extra trip (and no one in town stocked pink). Once I got it in and taped up both sets of threads, I screwed it tight into the Weber quick connect, then screwed the quick connect to my gas stub. After that I checked it for leaks with soapy water just to be safe and fired up my grill. It's much more compact that Webers suggested black iron pipe, and looks a lot cleaner too. I know this is an issue for the Genesis II grills, but I assume you'll need one for the new Genesis as well. My dad also got an Ooni natural gas pizza oven and faced the same situation, so if you have one of those you'll probably need this part as well.

Scritto da: Stephen

Good

Good

Scritto da: Blake3

Well made

Seemed like a well made part, although received wrong size

Scritto da: Amazon Customer

Good quality.

Got the job done, would recommend

Scritto da: Pam Kirkendall

Must have part for Weber Grill Natural Gas Hookup!!

Purchased a Weber Spirit II Natural Gas Grill. This part is essential to attach to the “quick release” hose that comes with the grill to then attach to the shutoff valve. DO NOT try to use a reducer that had a “flanged” end. It will NOT work.

Scritto da: Kennedy

Perfect fit for connecting my NG grill

Purchased this adapter to convert the 1/2” gas line connector from my house to the 3/8” gas line from my Weber Genesis grill. Easy to install and was a perfect fit. Tested the connections and no signs of leaking.

Scritto da: Kathy

Poorly machined

The 1/4” side is fine but the 3/8” side wasn’t fully machined so the threads won’t catch the female end I’m trying to connect. I’ve even used other 3/8” fitting to make sure it’s the correct size, and they all connect perfect. But this one just keeps turning and won’t catch.

Scritto da: L. Baydak

Machining defect.

There was a ridge line crossing all the threads on the 1/2" NPT part of the fitting. In the photo you can see a dark like running down the centre of the bright illuminated stripe. I suspect that it was a manufacturing defect (from a die maybe?). I can feel it catching my fingernail. Anyway. The fitting is scrap, since it would be near impossible to make a good seal, what with the sharp edge scoring and cutting holes and gaps in any thread tape or sealant I used.

Scritto da: Jabus

Not correct 3/8 size

3/8 sizing is incorrect

Scritto da: Amir G.

Great fit

Used this to connect my 1/2" gas supply line to a 3/8" quick connect adapter. Fits great and seems to be of good quality.

Scritto da: Amazon Customer

The size in the description is not correct

I went to the hardware store and got the correct fitting in five minutes. Some things are just better done in person.

Scritto da: Justine Milton

Works great!

I used this for my natural gas BBQ connection with some yellow pipe dope. I have been using it for many months and it has not developed any leaks or corroded outdoors. Very happy with the purchase!