0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

Accessori Cruiser 81200 Chiusure di fissaggio Bulloneria telaio targa, perno a stella in acciaio inossidabile standard

Brand:Cruiser Accessories

3.6/5

€
26.60

Gli elementi di fissaggio con perno a stella in acciaio inossidabile sono progettati unicamente per scoraggiare la rimozione di qualsiasi telaio della targa da un veicolo. Cruiser Accessories è un'azienda a conduzione familiare che produce e vende telai per targhe da oltre 30 anni. Attraverso l'innovazione, l'attenzione ai dettagli e molti design brevettati, Cruiser si è evoluto fino a diventare il più grande fornitore di telai per targhe, protezioni per targhe novità e hardware di montaggio nell'aftermarket automobilistico. La linea di prodotti Cruiser include anche hardware di bloccaggio Star Pin standard ed esclusivo, cappucci di fissaggio di design, accessori di montaggio, telai di motociclette e decalcomanie 3d-Cals. Lascia che gli accessori Cruiser completino il look della tua corsa oggi!

Quantity
Aggiungi al carrelloCompra subito

EAN: 603404107162

Categories: Settore automobilistico, Accessori Esterni, Coperture e cornici per targa, Elementi di fissaggio,

Facile da installare (illustrazioni sul retro della confezione). Progettato per adattarsi a tutte le targhe novità/targhe standard. Questi elementi di fissaggio sono realizzati in acciaio inossidabile. La combinazione del perno al centro con la speciale chiave Star Pin rende impossibile rimuovere le viti con una tipica chiave a brugola. Facile da usare e facile da installare, vedere il retro della confezione per le istruzioni di installazione. Include quattro (4) dispositivi di fissaggio da 1/4 x 3/4 pollici (6,35 mm x 19,05 mm), quattro (4) anelli di tenuta in plastica per dadi e una (1) chiave speciale Star Pin per l'installazione. Progettato per adattarsi a tutte le novità/targhe per veicoli domestici. Il design di questi elementi di fissaggio con il centro a stella rende impossibile rimuovere le viti senza la speciale chiave Star Pin, conservare la chiave per un uso futuro. Gli elementi di fissaggio standard Star Pin in acciaio inossidabile sono progettati unicamente per scoraggiare la rimozione di qualsiasi telaio della targa da un veicolo.
Brand Cruiser Accessories
Brand ‎Cruiser Accessories
Color Chrome
Color ‎Chrome
Country of Origin ‎China
Customer Reviews 4.5 4.5 out of 5 stars 1,276 ratings 4.5 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Exterior ‎Plastic
Finish Type ‎Polished
Fit Type ‎Standard
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 5.02 x 0.57 x 2.02 inches
Item Dimensions LxWxH ‎5.02 x 0.57 x 2.02 inches
Item model number ‎81200
Item Weight ‎0.1 Pounds
Item Weight ‎1.6 ounces
Manufacturer ‎Cruiser Accessories
Manufacturer Part Number ‎81200
Material Alloy Steel
Material ‎Alloy Steel
Model ‎81200
OEM Part Number ‎81200
Product Dimensions ‎5.02 x 0.57 x 2.02 inches
Vehicle Service Type Motorcycle
Vehicle Service Type ‎Motorcycle

3.6

13 Review
5 Star
74
4 Star
13
3 Star
8
2 Star
2
1 Star
3

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: M. Thurman
I need these for my tags.
Didn’t have a problem installing these myself, these were the type that were on her car and I needed the tool to get them off.
Scritto da: Natalia M.
Great product
Fit on my Mercedes E class and worked exactly as described. So far no rusting and are tight. Love the added security with the special tool. Will be trying these on a Kia Forte as well and will update regarding the fit on that vehicle.
Scritto da: Scott
Security posts work well
My car recently got stolen, and the first things the thieves did was swap the plates with another car on the side of the road. In addition to hiding an AirTag in the trunk so I can track the vehicle, I wanted these to make my car harder to hide. The top review says that the security posts were short enough that they could screw them on and off with a screwdriver. I did not have this problem. There was the tiniest bit of bite with a flathead screwdriver, but it immediately slipped out when I applied any force at all. A thief would have to use more than common hand tools to remove these. I have stock circular screw plastic inserts on my 2010 Subaru Outback, and these screws initially looked too thick to fit in them. But they actually fit perfectly. I didn’t use the square inserts in this pack.
Scritto da: Denis
Good deal
I only wanted the star wrench and I got that in this package , now I can put my new handicap plates on .!! Thanks worked nice !!
Scritto da: Mike A.
Too small unless used with washers
I got these to attach a license plate to a utility trailer. The license plate was brand new, made of aluminum which is fairly soft. The head on these bolts is barely larger than the hole in the license plate, it catches the plate by maybe half a millimeter on each side of the hole in the plate. It would not have taken long before the plate fell off after the holes in the soft aluminum plate enlarged over time. I had to go buy some 1/4" washers to put under the bolt head and under the nut in the back to ensure that the plate wouldn't fall off the bracket. Other than the bolt head and nut being too small to be used for a license plate bolt they are well made, the nuts fit snugly and have a nylon insert so they don't rattle off, the tool works well to install the bolts. They just need to have a larger bolt head and nut, or be supplied with flat washers. For the price though they are great quality and well made.
Scritto da: Infinity
Perfect for a 2008 Subaru Impreza
Perfect replacement for old nylon fasteners that were starting to deteriorate on our 2008 Subaru Impreza Hatchback. Screws being made of stainless steel are nice as they won't rust like the old steel ones.
Scritto da: Alvin Atkins
ok
Works Great
Scritto da: Kevinrogue9
No big complaints
Product came and worked as expected. I used these on 2 different vehicles. One required the use of the white plastic inserts that come in the package. The other was not designed for the insert and just has holes in the bumpers. The vehicle that used the inserts was fairly straightforward and simple. When removing the old plastic inserts be sure to put a piece of paper or thin plastic between the paint and whatever you use to pull the plastic insert out or you might scratch the paint. I used two methods to remove them. I used the above mentioned method on the front, and then I removed the inside trunk cover and just pushed them out. The new ones pop right in. The screws for the other vehicle that didn't use the inserts were a little tight in the holes, but if you work them through to size them before you attach the license plate its much easier. I had a minor issue with the Allen Wrench that comes with in the package because the top of the license plate on the rear bumper is very close to the overhang in the bumper making it hard to use the Allen wrench. That's not Cruisers fault, that's poor design by the car manufacturer.
Scritto da: R. Blythin
decent quality
Overall the quality seems quite good. Unfortunately doesn't meet my current needs. The current screws on the front plate of my mx5 are too long. A shop pushed against the plate during a service and slightly chipped the paint. I was hoping these would suit, turns out they are the same size. Due to the package design you have to cut it open on three sides, so can't be returned. They may come in handy on a future car.
Scritto da: Dr. J
Good theft deterrent for the price
Someone stole my license plates and then ended up stealing gas using the plates, so the police wanted to ask me a few questions. Luckily I reported the plates as stolen so I had no trouble, just an inconvenience more than anything. Long story short, I got these screws and they seem to be a good theft deterrent at a low price. Fortunately, my included screwdriver key that I received had the special key on both ends unlike some other reviewers, so it was no issue to put the screws on my 2015 Hyundai Sonata.
Scritto da: Ankit
Good stuff
Liked this product as it is secure and no one can open any screws. Must buy if your licence plate is stolen.
Scritto da: moose
as advertised
as advertised. bought a used truck and wanted to replace the old rusty screws.
Scritto da: None
Perfect production and save some money
very good very nice good value for 2 years

Prodotti correlati

hot
Accessori Cruiser 81200 Chiusure di fissaggio Bulloneria telaio targa, perno a stella in acciaio inossidabile standard
3.6/5

€ 26.60

Accessori Cruiser 81200 Chiusure di fissaggio Bulloneria telaio targa, perno a stella in acciaio inossidabile standard
3.6/5

€ 26.60

hot
Bolt Motorcycle Hardware (2007-LPF) Kit di fissaggio targa
3.5/5

€ 12.94

Bolt Motorcycle Hardware (2007-LPF) Kit di fissaggio targa
3.5/5

€ 12.94

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu