3M 2228-1X10FT 054007507277 1x10 Nastro mastice gommato, 1x10FT

Name: 3M 2228-1X10FT 054007507277 1x10 Nastro mastice gommato, 1x10FT
Brand: 3M
SKU: 0054007507277
Price: 41.59 EUR
Availability: InStock

Brand:3M

3.8/5

€
41.59

Scotch Rubber Mastic Tape 2228 è un nastro isolante e sigillante elettrico in gomma autofondente conformabile costituito da un supporto in gomma etilene propilene (EPR) rivestito con un adesivo mastice aggressivo e stabile alla temperatura. Questo nastro ha uno spessore di 65 mil (1,65 mm) per un rapido accumulo dell'applicazione. È progettato per applicazioni di isolamento elettrico e tenuta all'umidità. È un componente riconosciuto UL per applicazioni fino a 130°C. Offre un'eccellente resistenza all'umidità e all'esposizione ai raggi ultravioletti ed è destinato ad applicazioni sia interne che esterne esposte alle intemperie. Il nastro di mastice in gomma scozzese 2228 deve essere applicato in strati semilappati fino a raggiungere l'accumulo di isolamento desiderato. Tendere il nastro a 3/4 della sua larghezza originale durante l'applicazione per una buona conformabilità e per ottenere una tenuta stagna all'umidità.

Quantity

Aggiungi al carrello Compra subito

EAN: 0054007507277

Categories: Prodotti industriali e scientifici, Adesivi, sigillanti e lubrificanti, Nastri adesivi, Nastro elettrico,

Ritardante di fiamma. Costruzione spessa per una maggiore imbottitura. Ottime proprietà di tenuta all'umidità. Grado professionale. Solo per uso industriale/professionale. Non per la vendita o l'uso da parte del consumatore. STABILITÀ: 5 anni di validità (dalla data di produzione). CONFORMITÀ: elenco dei componenti riconosciuto UL per non superare i 130 °C (266 °F), categoria di prodotto OANZ2 e file 3M n. E17385; A norma RoHS. TEMPERATURA DI FUNZIONAMENTO: le proprietà elettriche sono stabili fino a 130 °C (266 °F). RESISTENZA ALLE INTEMPERIE E ALL'UMIDITÀ: Guarnizione contro l'umidità per collegamenti di cavi e fili. ISOLAMENTO ELETTRICO PRIMARIO PER: Collegamenti di cavi e fili e imbottitura antivibrante per conduttori di motori fino a 1000 volt. CONFORMABILE SU CONNESSIONI DI FORMA IRREGOLARE: La costruzione spessa consente un rapido accumulo di applicazione e imbottitura su connessioni irregolari.

Brand	3M
Color	Black
Is Discontinued By Manufacturer	No
Item model number	2228-1X10FT
Manufacturer	3M Industrial Market Center
Material	Rubber
National Stock Number	5970-01-349-5326
Number of Items	1
Product Dimensions	1.6 x 3.65 x 3.85 inches; 6.4 Ounces
Size	1x10FT

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Wyatt

Not only for wiring

I used it to make downtube and chainstay protection on my mountain bike. Works very well, prevents chips and scratches, and looks cool if you line it up right. My only complaint is that it isn’t friction resistant at all. Had some brake housing and wanted to see if the tape could help prevent damage from the rubbing, wore right through the tape. TBH I wasn’t expecting much since it is fairly soft but I wanted to try anyway.

Scritto da: Paul Stuart

Silences your bike!

Bought this to keep the chain slap to a minimum. Put it on my chain stay and added some ridges. Really helped. Has been on more than a year and still looks good and quoted the bike down quite a bit. You can peel it off and clean it with goo gone if you need to.

Scritto da: Jim Piatt

I don't use shrink tubing any more on electrical connections

I almost always solder electrical connections and this stuff makes a waterproof seal and is easier to apply than shrink tubing. It seems to vulcanize to itself when wrapped and is rather hard to get off wiring when that is needed. That's OK, I want something that works well. I use it to also wrap some hose clamps for looks and to avoid chafing. Tons of uses so I carry it in my work truck and fun buggy. I just cut off a small strip, peel off the paper and stretch it before applying. EZ and effective.

Scritto da: BL

Good Top Coating for Wiring

Used this to wrap wiring for a protective coating. This tape sticks and seals very well. It is pretty pricey though and do not go very far. It is a very good product without doubt. Will buy again if have a need for it.

Scritto da: Erick Cruz-Larios

Chainstay protector

Bike was already used so ignore the scratches. Used this as a chainstay on my girlfriend's Marlin 5. It's thick and feels like a peice of rubber. No doubts in my mind that it is sealed well and has great adhesion, also its practically impossible to pull it apart if it adhears to itself, which is what its made to do.

Scritto da: BondGuy

Bike chain guard

A tiny bit thick for this use but it works. Chain won't slap your frame and cause paint chips if you stick this stuff to the impact points. You could make about 15 chain guards for half the price of a single pre-cut one specifically designed for bikes.

Scritto da: G9000

Great for Bike Protection

Bought this to use on my mountain bikes for rock protection and chain guard slap. Works extremely well. Used in on both mountain bikes, and even my road bike. Its been holding up really well. I ride my bikes every day, so if it was gonna fail it would have shown its weakness by now. However so far, it all still looks great! Recommeded it to all my buddies. Much cheaper than buying the dedicated bike protectors!!

Scritto da: C L Smith

Real rubber tape

Don’t settle for off brands. This tape is self sealing, and makes for moisture proof electrical splices. The trick is to stretch it applying and wrapping. You will feel it get very tacky as you are wrapping. Press down all the edges. It makes for a pretty permanent seal. I ‘ve been using this brand tape on all electrical installations in marine applications and never had a failure.

Scritto da: aaron lemieux

Excellent product

Excellent product, works great for sealing wiring harnesses against salt, water and corrosion

Scritto da: Gael Carlier

Excellent quality

Bought this to protect my bike's chainstain and I've also used it to protect the cranks ends. It's very easy to apply and seems ideal for the job. Only put 4*due to the price (£24 for a roll).

Scritto da: Sonsems

Great product!

Very sticky to seal off the electrical joint to prevent moisture and also I used it on my Mtb for chain stay protection.

Scritto da: Noble Wulf

Great for protecting against chainslap on my mountain bike

Great for protecting against chainslap on my mountain bike. Layer it up to make the chain quiet. Only thing is its extremely hard to remove the mastic from the paint. Just mushes around until you can get it all off. This is a MUST for anyone who rides downhill, bike parks ect.

Scritto da: MLM

Its Works!

I am sure it is used for other things but I bought it for use on my bicycles. Sticks well and is thick (one sided only). 3M/Scotch quality. Much easier to order from Amazon that to hunt for in the stores...