Westinghouse Lighting 101000 Saf-T 0 Brace Scatola per ventilatore da soffitto, 15,5 Cu-in X 2-3/4 in LX 12-1/2 in WX 1-1/2 in D, xxx Argento 15,5 cu-in x 2-3/ 4 in L x 12-1/2 in W x 1-1/2 in D Argento

Name: Westinghouse Lighting 101000 Saf-T 0 Brace Scatola per ventilatore da soffitto, 15,5 Cu-in X 2-3/4 in LX 12-1/2 in WX 1-1/2 in D, xxx Argento 15,5 cu-in x 2-3/ 4 in L x 12-1/2 in W x 1-1/2 in D Argento
Brand: Westinghouse Lighting
SKU: 0784497811430
Price: 68.15 EUR
Availability: InStock

Brand:Westinghouse Lighting

3/5

€
68.15

Il Westinghouse 0101000 Saf-T-Brace consente di installare in sicurezza il ventilatore da soffitto o l'apparecchio di illuminazione in quattro semplici passaggi, senza dover accedere allo spazio della soffitta. Ideale per l'installazione durante il rimodellamento, il supporto di montaggio può essere installato in soffitti finiti attraverso un foro da 4 pollici. Questo tutore è compatibile con ventilatori da soffitto fino a 70 libbre. Il Saf-T-Brace viene fornito con tutto il necessario per l'installazione, comprese le istruzioni facili da seguire. Ogni estremità include quattro denti per una presa extra forte e viti in travetti in modo indipendente per una maggiore sicurezza e stabilità. Per maggiore facilità, la scatola elettrica può essere posizionata ovunque sul tutore per soddisfare le esigenze del progetto. Funziona con travetti del soffitto esistenti tra 16 e 24 pollici di larghezza. La scatola elettrica a doppio montaggio da 15-1/2 pollici cubici, profonda 1-1/2 del tutore fornisce 8-32 fili per piastre di copertura e apparecchi di illuminazione leggeri e 10-24 fili per ventilatori a soffitto e lampadari. Include anche un Saf-T-Cap per proteggere bulloni e fili durante l'installazione e la verniciatura del muro a secco. Il tutore è elencato UL/CUL per supportare apparecchi di illuminazione fino a 150 libbre su centri da 16 pollici e 50 libbre su centri da 24 pollici. Supporta fan fino a 70 sterline. Numero di riferimento del prodotto 01010.

Quantity

Aggiungi al carrello Compra subito

EAN: 0784497811430

Categories: Strumenti e miglioramento della casa, Illuminazione e ventilatori a soffitto, Ventilatori da soffitto e accessori, Accessori, Adattatori di montaggio,

Installa senza accesso alla soffitta. Adatto a tutti i ventilatori da soffitto. Adatto a travetti da soffitto da 16 pollici a 24 pollici.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Westinghouse Lighting
Brand	‎Westinghouse Lighting
Color	Silver
Color	‎Silver
Controller Type	Pull Chain Control
Controller Type	‎Pull Chain Control
Customer Reviews	4.1 4.1 out of 5 stars 101 ratings 4.1 out of 5 stars
Electric fan design	Ceiling Fan
Electric fan design	‎Ceiling Fan
Included Components	Hardware;Fasteners & Hooks;hardware-braces
Included Components	‎Hardware;Fasteners & Hooks;hardware-braces
Is Discontinued By Manufacturer	‎Yes
Item model number	‎101000
Item Package Quantity	‎1
Item Weight	‎1.76 pounds
Manufacturer	‎Westinghouse
Model Name	101000
Model Name	‎101000
Mounting Type	Ceiling Mount
Mounting Type	‎Ceiling Mount
Number of Blades	4
Number of Blades	‎4
Part Number	‎0101000
Product Dimensions	‎19.75 x 15.5 x 16.25 inches
Size	‎15.5 cu-in x 2-3/4 in L x 12-1/2 in W x 1-1/2 in D
Special Feature	Lightweight
Special Feature	‎Lightweight
Special Features	‎Lightweight
Style	Modern
Style	‎Modern
Warranty Description	‎"no ifs/ands/buts" ultimate lifetime warranty - if a fan is defective due to faulty materials or workmanship, westinghouse will repair or replace the ceiling fan for the lifetime of the fan.

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Berserker

Works as advertised but beware of common sense pitfalls

Device works as claimed but there were a few challenges. You have to make sure your hole will be somewhat spaced between the joists. Might be a challenge w/o a stud sensor. Insulation in the attic may get in the way so be aware of that, especially if it's blown in. That was a real pain. I used an existing light fixture hole which was only 3" in diameter and this required a 4" hole so cutting may be required in your application.. Since it was an existing fixture, the old bracket had to come out. That was some work but I used a trick to remove it w/o having to brave the attic (which isn't that the point of using this device after all?), You will probably be working off of a ladder so that presents some obvious challenges as well. Now that its done I'm glad I did it and the ceiling fan doesn't wobble one bit even on high. I give it 4 stars just because the instructional video doesn't really address what to most would be the common sense items I described above. It may be easier for some to go into their attic and do it directly rather than using this but it is a clever way to get a stout support for a ceiling fan.

Scritto da: Dennis Cooper

Great ceiling fan mount

Great mount. Only thing i was lucky to have attick access to it cuz otherwise i don’t know if i was able to to tighten it down through a small hole, or you would have to cut the drywall down, but that is the whole point in buying one of these. i just wish the mounting pole would be the shape of a wrench so you can tighten it with a tool and not with a bare hand. 4 stars from me. only because it is hard to fix it in a position really nice and strong by bare hand through a small hole.

Scritto da: TheMadReview

Item is not a twist to tighten.

Normally with these styles this is twist to tighten. If you are looking for that easy install this is not the one.

Scritto da: PAUL UNDERWOOD

Know when to brace

Very heavy duty and will support any light or fan I would ever use in my home. I ended up in the attic space to install instead of going through the ceiling. My home was built in the early seventies by carpenters who took pride in using a lot of big nails to anchor electrical boxes. The opening was big enough to undo the wiring and no room to attack the very secured metal box. I used a 2x4 and hammer until my wife came in and screamed at the mess the popcorn ceiling was making on the carpet beyond where the drop cloth covered. In the attic, where it was so hot lead was melting, I made my way to the box and removed it along with a pound of nails and installed the brace. One more to install late this winter.

Scritto da: jane freas

westinghouse brace for ceiling fan

my handyman had to take the brace apart in order to get it between the ceiling joists, but had no problem installing after that, the screws into the fixture from the fan appeared at first not to fit, but after some manipulation, he was able to tighten them into place and it all went well after that, it was the first brace he ever saw that had screws at the ends to attach to the joists, i guess most have springs, so i would think this would hold better because of it, good product!

Scritto da: BrettMan

Very solid

Very solid and sturdy. My studs were only 13 inches apart so I actually had to use a hacksaw and cut this down, which was a pain, but easier than trying to get to the store during lockdown! I actually had access to the attic so I installed it from above, but it seems like trying to install it from below might be a challenge. It is very solidly installed and the fan doesn't move an inch, even on high.

Scritto da: Robert P. Dyer

Strong sturdy, but by a mold ring with it.

Easy to install and screw in. Very sturdy and rugged. But, be sure to buy a mold ring along with it because you may need to adjust the hole { cut out sheet rock } for the perfect fit.

Scritto da: Bryan Hryszkanich

So close to being great

Let me start out by saying the only reason I rated this bad is because the bar that goes across is round, so the bracket that goes over it doesn't stay tight (it moves back and forth). The instructions said not to overtighten it, but if you dont the hook is not sturdy and the fan rocks. I guess I over tightened it trying to stop it from rocking because the bolt that holds it together snapped in half. If this cross bar had been square rather than round this wouldn't have been an issue. I did love how you turn it to tighten it into the wood beams.

Scritto da: Zoron

Works great

No guessing getting the outlet to be flush to the ceiling. Super easy to install!

Scritto da: Lesa

Great

Happy ????