0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

Wagner Spraytech 0417005 HVLP Control Spray Spruzzatore per macchie, ideale per macchiare e sigillare ponti, recinzioni e grate

Brand:Wagner Spraytech

3.3/5

€
113.42

DESCRIZIONE DEL PRODOTTO Il Control Spray applica i rivestimenti in modo uniforme con controllo ed efficienza. È ideale per spruzzare materiali sottili come macchie e sigillanti durante il ripristino di un ponte, la rifinitura di mobili da esterno, la sigillatura di decorazioni in legno e altro ancora. I modelli regolabili e il flusso del materiale rendono il Control Spray facile da usare per ottenere i risultati desiderati. Lo spruzzatore è progettato per la massima efficienza; l'installazione richiede pochi minuti e la pulizia richiede meno di 10 minuti. La pistola per verniciatura a spruzzo viene fornita con un 1 qt. contenitore in modo da poter completare piccoli progetti senza dover ricaricare, inoltre spruzza fino a 4,1 once. al minuto che consente di completare i progetti più rapidamente. DAL PRODUTTORE Lo spray di controllo applica i rivestimenti in modo uniforme con controllo ed efficienza. È ottimo per materiali sottili come macchie e sigillanti che vengono utilizzati su progetti all'aperto come un piccolo ponte o la rifinitura di mobili da giardino. I modelli regolabili e il flusso del materiale rendono il Control Spray facile da usare per ottenere i risultati desiderati. Svolgi rapidamente i tuoi progetti con la configurazione che richiede meno di cinque minuti e pulisci in meno di 10 minuti.

Quantity
Aggiungi al carrelloCompra subito

EAN: 132017772912

Categories: Strumenti e miglioramento della casa, Vernici, trattamenti per pareti e forniture, Forniture e strumenti per la pittura, Applicazione della vernice, Spruzzatori di vernice,

REALIZZA I PROGETTI RAPIDAMENTE: lo spruzzatore si installa in pochi minuti e si pulisce in meno di 10 minuti grazie al design semplice e alle poche parti da pulire. PITTORE A SPRUZZO REGOLABILE: utilizzare la regolazione del flusso di materiale sul grilletto per aumentare o diminuire facilmente l'uscita del rivestimento. TRE MODELLI DI SPRUZZATURA: ruota il cappello dell'aria per spruzzare orizzontale, verticale o stretto in modo da adattarlo alla forma del pezzo che stai spruzzando. RAGGIUNGI LA FINITURA PERFETTA: l'ugello Control Finish spruzza una finitura liscia e uniforme ed è progettato per spruzzare materiali leggeri come macchie, sigillanti, uretano, vernici e smalti. PISTOLA A SPRUZZO HVLP: Lo spruzzatore per macchie Control Spray offre controllo ed efficienza quando si spruzzano materiali sottili su piccoli progetti all'aperto come mobili da giardino, piccoli ponti, decorazioni in legno e altro ancora.
Brand Wagner Spraytech
Color Yellow
Country of Origin China
Customer Reviews 4.3 4.3 out of 5 stars 1,050 ratings 4.3 out of 5 stars
Domestic Shipping Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 16.51 x 24.94 x 27.31 inches
Item model number 0417005
Item Weight 3.56 pounds
Manufacturer Wagner Spraytech
Material Multi
Power Source Corded Electric
Product Dimensions 16.51 x 24.94 x 27.31 inches
Style Adjustable,Round
Tank Volume 1 Quarts

3.3

12 Review
5 Star
66
4 Star
13
3 Star
8
2 Star
5
1 Star
8

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: MJ Poppyseed
buy it now, you won't regret the professional results you get and the easy clean up
I had this exact same sprayer and absolutely loved it. Then one day I rested it on the work table in our garage and someone accidentally knocked it over, breaking the little clip that holds the sprayer part to the motor/fan. So frustrating since everything was still in working order--motor, cups, etc. it's just that nothing held the cup assembly onto the sprayer. This is dangerous since the fan/blower needs to be firmly secured. I probably could've held it on by making sure I used 2 hands and kept holding the trigger but that's dangerous with a cup full of paint on pieces I took quite a bit of time to prep. I had the usable front part so I figured I'd buy another one. This is cheaper than the big orange and blue box stores, at least at the time of this writing, and it works exactly the same way as my old one. I use this only for water based paints and sealers-- I can't imagine cleaning up every little piece with mineral spirits for oil based items. If you thin the paint properly and keep everything clean, you will get an amazingly professional finish. When first starting, pull the trigger to initiate the motor but not hard enough to start spraying: this will allow pressure to build in the cup for a more even finish. Hold for a couple seconds (I sometimes get a little pop sound) then pull all the way to get the paint to dispense. Do not go right to your actual piece before testing on a scrap piece of cardboard! Don't be frustrated if paint doesn't come out immediately. Hold it there for longer than you'd think was comfortable. Try making right left passes on your cardboard, go up and down. If after awhile nothing is coming out then you may need to thin your paint more. Don't worry if you're thinning more than the manufacturer says-- my pieces come out fine. Also don't stand too close or stay in one spot too long. Remember, multiple light coats are better than drippy thick ones. Also be aware of the bend of the inner tube-- for example if you are spraying upwards and the bend of the tube is kicked forward, you might get some sputtering when your paint level gets low. The same is true if you pointing downward and the bend is toward the back of the cup. When I stop between coats, I take off the cup assembly and rinse out all the pieces so paint doesn't dry inside or on the nozzle. I cover the cup with some tin foil then put it all back together and go back to spraying when the first coat is dry. It is VERY easy to clean-- I undo the cup and toss the tube and yellow ring along with the front black part that the paint sprays through into a bucket of water in the sink. Rinse out all the pieces then reassemble. Sometimes I need to use an old toothbrush if I had a lot of pieces to paint or it was hot outside because the paint could dry and build up around the hole. This is a great entry level sprayer, and everytime we use it we remark how great the finish looks. I'm amazed every time. And over time it saves you money because you are not buying cans of spray paint. Even with polyurethane you can save a ton by buying a quart of water based and using the sprayer. Plus you're not breathing in the fumes from the oil based spray paints. I just finished a large wooden sign and 4 coats of semigloss went on in less than an hour with super professional results (in the pic I sprayed the matte black background, built the frame, then after stenciling, spray sealed). I've also used it for furniture, especially items with curves or corners... your days of brushes will be over!
Scritto da: Greg Perry
Wish I could have tapped straight into bucket.
56 feet of fence and I had to stop every 8 feet or so to reload. Stained one side of fence one day and the other side the next day. Easy to clean and worked great both days. 56 feet of fence, each side, no problems other than running out of stain multiple times.
Scritto da: Sarah Caseltine
Worked great for me
This sprayer is so versatile! I bought it to seal my new privacy fence, and for that, it worked amazingly. There was no way I could’ve gotten it done by hand as consistently and efficiently as I did with the sprayer. The other time I have used it so far has been to stain my dresser. Truth be told, it probably would’ve been equally fast/efficient to just stain it by hand, and it probably wouldn’t have been as messy either, so I wouldn’t use it for that again, but I’m very interested to see how other projects turn out with it. Both times I used it, it took me about an hour to clean it completely, which is the only down side. With the sealer especially, I wanted to make sure all the oily residue came out, so I used acetone to get everything up, and that worked well. It was just a process getting in all the small spaces (i.e., the tube), but I think that would be the case with any sprayer. Overall, I’m super happy with it!
Scritto da: Van Kleyla
Worked well
Paid for itself
Scritto da: Amazon Customer
A pain to clean but worked good.
I used this to stain a picket fence. Worked good but really a pain to clean. Not difficult, just time consuming. My stain required mineral spirits for cleaning and then soap and water. The unit itself, worked well on a huge stain job though.
Scritto da: Amazon Customer
Worked well to stain a very long fence
I bought this for a big project & I had pretty good results with it. The spray diameter did not cover as large of an area as I had hoped but it got the job done & was easy to use. I highly recommend thinning out your paint/stain with paint thinner & be sure to thoroughly clean the gun out with hot soapy water each time you’re finished using it.
Scritto da: Patrick Grow
A Good sprayer for the money, just read the directions and be patient
Happy to say this sprayer works as advertised. I have a larger (HVHP) sprayer for big projects, but I wanted something that would work for doing varnish on a boat, and small maintenance work around the house. It didn't disappoint, but let me specify the caveats. 1. Read the directions. 2. Read them again. 3. Pop quiz--what does it say to do after cleaning with mineral spirits? You get the idea. So, it takes a bit of getting used-to. The trigger is two-stage. Try it out with a the container filled with water. Play with the nozzle and get a feel for the spray direction. Play with the flow-control screw to understand how it will work with thin materials (oil-based whatever) or thick (latex) Next, pay really good mind to the condition of the paint you're using. Brand new can? Half empty? Mix well, thin well, strain often. Fill the spayer's container, and DO NOT LET IT SIT--get to work. I used this twice a day for 10 minutes a shot for 4 straight days with quality (InterlXX Schooner varnish) and thinner. It took a bit of getting used to. The first time, I didn't thin enough, and my flow rate was set high. (turned out a bit splotchy) Second time I thinned too much, and flow rate was too low. (insufficient coverage) Increased flow rate, and it ran, but only slightly. Shut it down and cleaned it (improperly) Next day, glops (UGH!!) Why? I didn't rinse the mineral spirits with water afterwards, as directed (small sidebar). I finally figured out that, for me, running mineral spirits into an empty large yogurt container (which I could strain and partially reuse) and following with warm tap water could get things cleaned up in 5 minutes or so. After I got a "system" down, it would deliver very good results. Is this the $50 alternative to a $600 hvlp turbine for furniture shops? No. Does it work for me? Mostly. I have to admit, the final finish was done by foam brush for consistency. I think if I had the time and money to keep buying expensive cans of varnish, I could have gotten better with the Wagner. Next, I used it with water-based dyes on yet another kayak. Worked GREAT. Super-consistent and fast. Cleanup was 3 cups of water shot through it between colors. Next, some old latex on the shed. THINNED HEAVILY. Works. (Not sure what the guy who said it was "slow" was doing) Not great, but I got the door painted, the trim and everything in 15 minutes. You want a perfect finish? Take the time to learn what setting works for what you're doing. I firmly believe that the majority of the negative reviews were from those who A) didn't read the directions, B) didn't clean the machine properly C) failed to thin adequately D) didn't bother to strain their finish. Painting takes a bit of finesse, folks. This thing isn't a free ride, but works as well or better than I had anticipated.
Scritto da: randy smith
After every use, clean the spray gun
A good spray gun for the money,
Scritto da: Asterixx
I am extremely happy with this sprayer
I am extremely happy with this sprayer! I bought it to paint a large gazebo I had just built, and it has saved many hours and also saved paint! Before buying it my fiancée painted one section of it. It took him half a day (the board & batten siding is very rough and difficult to paint with a brush) and he used half a can of paint. I did all the remaining sections in three hours with the other half of that can of paint. If this thing stopped working tomorrow I'd still be happy with the work I got out of it!
Scritto da: HARRY OXFORD
Great unit, easy on the paint and a good ...
Great unit ,easy on the paint and a good job, be sure paint is not too thick, it operates really well...........
Scritto da: Darla Anderson
Great product
This is such a great product, has cut down time painting with our home renovation.
Scritto da: Doug
Great machine
Worked very well and easy to use.

Prodotti correlati

hot
Graco TRU311 TrueAirless 311 Ugello di spruzzo 311 nero, argento
3.8/5

€ 63.35

Graco TRU311 TrueAirless 311 Ugello di spruzzo 311 nero, argento
3.8/5

€ 63.35

hot
Pistola a spruzzo SPRAYIT SP-352
3.1/5

€ 45.31

Pistola a spruzzo SPRAYIT SP-352
3.1/5

€ 45.31

hot
Graco 24E375 Tazza per spruzzatore di vernice TrueCoat, 48 oz, bianco
2.9/5

€ 62.01

Graco 24E375 Tazza per spruzzatore di vernice TrueCoat, 48 oz, bianco
2.9/5

€ 62.01

hot
Fuji Spray 2803-T75G Mini-Mite 3 Platinum - Sistema di spruzzatura HVLP a gravità T75G
3.8/5

€ 1479.14

Fuji Spray 2803-T75G Mini-Mite 3 Platinum - Sistema di spruzzatura HVLP a gravità T75G
3.8/5

€ 1479.14

hot
Spruzzatore di vernice airless con supporto Graco 17D163 Pro210ES
3.6/5

€ 1849.09

Spruzzatore di vernice airless con supporto Graco 17D163 Pro210ES
3.6/5

€ 1849.09

hot
Wagner Spraytech Power Products 501415 415 Ugello reversibile
2.8/5

€ 64.89

Wagner Spraytech Power Products 501415 415 Ugello reversibile
2.8/5

€ 64.89

hot
311 Graco Inc. NAR311 Ugello di spruzzo stretto reversibile True Coat
3.5/5

€ 74.03

311 Graco Inc. NAR311 Ugello di spruzzo stretto reversibile True Coat
3.5/5

€ 74.03

hot
Fuji 5175G - Pistola a spruzzo a gravità T75G
3.8/5

€ 699.99

Fuji 5175G - Pistola a spruzzo a gravità T75G
3.8/5

€ 699.99

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu