VEVOR Supporto Motore, 750 lbs (3/8 Ton) Supporto Motore Rotante con Testa Regolabile a 360 Gradi, Carrello di Sollevamento Motore in Ghisa, 4 Ruote, 4 Bracci Regolabili, per Manutenzione Veicoli, Riparazione Auto

Name: VEVOR Supporto Motore, 750 lbs (3/8 Ton) Supporto Motore Rotante con Testa Regolabile a 360 Gradi, Carrello di Sollevamento Motore in Ghisa, 4 Ruote, 4 Bracci Regolabili, per Manutenzione Veicoli, Riparazione Auto
Brand: ‎VEVOR
SKU: 0840281570485
Price: 271.75 EUR
Availability: InStock

Brand:‎VEVOR

2.5/5

€
271.75

Ottimo per i tuoi lavori di riparazione: questo supporto motore è compatibile con varie marche di blocchi motore e viene fornito con una maniglia estesa 20 e 6 fori di posizione, rendendo la rotazione e il fissaggio senza problemi. Il cavalletto motore è ottimo per il tuo lavoro, che tu sia un meccanico professionista o un appassionato di bricolage. Mobile e bloccabile: dotato di 2 ruote fisse e 2 ruote universali a 360° (di cui 1 con freno), questo supporto motore può essere facilmente spostato e posizionato esattamente dove serve. Le ruote sono realizzate in ghisa QT450, che fornisce resistenza alla pressione e all'usura, assicurando che il supporto del motore funzioni senza problemi per gli anni a venire. Stretto e sicuro: i bulloni a testa esagonale lunga 1.1 sui bracci di montaggio forniscono una presa salda e sicura sui blocchi motore, eliminando qualsiasi preoccupazione di allentamento durante la manutenzione. I bracci di montaggio regolabili e ruotabili a 360° assicurano di svolgere il lavoro in modo efficiente ed efficace. Il corpo del supporto motore è realizzato in materiale di ghisa, noto per la sua resistenza e durata. Costruito per durare: realizzato in acciaio legato selezionato, questo supporto motore fornisce un supporto stabile per il tuo motore. Non è soggetto a deformazioni o fratture, anche con un uso a lungo termine. La superficie di spruzzatura elettrostatica fornisce anche un ulteriore strato di protezione contro la ruggine che farà sembrare il tuo supporto motore nuovo per gli anni a venire. Cavalletto motore da 750 libbre: con test rigorosi, è stato dimostrato che regge in modo sicuro fino a ben 750 libbre (3/8 tonnellate), consentendo al motore di essere tenuto in posizione in modo sicuro e saldo. La base a forma di H aggiornata prende il posto della tradizionale base a forma di T, rendendo il motore ancora più stabile. Non dovrai più preoccuparti di scuotere o inclinare!.

Prodotto non disponibile

EAN: 0840281570485

Categories: Settore automobilistico, Strumenti e attrezzature, Garage e negozio, Sollevatori, montacarichi e martinetti per veicoli, Paranchi e supporti per motori,

Brand	‎VEVOR
Country of Origin	‎China
Customer Reviews	3.5 3.5 out of 5 stars 23 ratings 3.5 out of 5 stars
Item model number	‎Engine Stand 4 Adjustable Arms
Item Weight	‎41.4 pounds
Manufacturer	‎VEVOR
Manufacturer Part Number	‎750LBS Engine Stand
Model	‎750 lbs
Product Dimensions	‎33.3 x 27.6 x 33.3 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Kyle V.

A bit flimsy (750 pound)

The motor is about 550 dresses and the stand is bowing forward. A bit nervous about it

Scritto da: Amazon Customer

Ls engines

It will not bolt up to ls engine

Scritto da: Betty m.

Can't mount A small block chevey

Mounting plate will not mount to a small block chevey motor. After addapting hanger and getting motor mounted it leans away from stand so motor is not level. Lots of weld sledge had to be ground off so stand parts could fit proper.

Scritto da: Joseph garcia

Does not work

Arms are not long enough to bolt up a Chevy 350

Scritto da: Jimmy

OK, if you don't mind doing some extra work

VEVOR has never been the 'ultra premium' maker of tools but over the years I've been satisfied with their designs and their prices have always been way cheaper than the competition. They usually need some minor modifications during assembly to make them better, but it's never been anything too difficult. This particular engine stand, however, has some problems that I just can't correct without investing some substantial time. The bolts are metric grade 4.8 which seem to be the equivalent of a hardened peanut butter that strip way too easy during assembly. I don't apply excessive torque to any bolts but the hardware they included is just way too soft. Metric grade 4.8 crosses over to barely SAE Grade 2, which I would never use for an industrial assembly. All of the hardware in my shop is a minimum of Grade 5. I had to replace several bolts with my own hardware since there are no extras included. Now look at the tubing where the head mounts. The tube was fabricated with the holes for the alignment pin drilled before it was welded to the stand upright. They clocked the hole at about 1 o clock instead of straight up at 12 o clock before they welded it. I guess no one even cared enough to look at it before it was boxed up because, at a glance, it is very obviously wrong. Most of the welds looked like they came out of a toothpaste tube. Some were barely covering the joint they were intended to fuse together. They are not very confidence inspiring. Oh, did I mention the 4 blocks that attach the engine to the head were all missing? I have a request to VEVOR for replacements currently. We'll see. I can correct all of these problems but I intended on just bolting this together and be done, so this is not what I signed up for. The basic design of this stand is solid, but the execution of the assembly is pretty horrific. Combine this with missing and sub par hardware and maybe you should just keep looking for something else. I suppose I could return this, but who knows what the quality would be for the next one.

Scritto da: Amanda and Dave

HORRIBLE PAINT, CRAPPY HARDWARE, I WANTED TO LOVE IT

When I saw this folding engine stand in orange, I was very excited and ordered it. Once it arrived and I opened the box, my excitement level dropped a bit. Once I assembled the stand, my excitement level was non-existent. I'm thankful that I didn't have to pay money for this stand. The first thing I noticed was the horrible paint job. The pieces are full of runs, bubbles and thin spots that you can see the black primer through. The second thing I noticed was the cheap, soft and weak hardware with odd size hexes. The bolts are metric although the hex sizes are in between sizes. The lock washers are a joke as well, they are like circles of wire that are too big in diameter for the bolts. IF I KEEP this stand, I will be replacing all the hardware. Once assembled I noticed all the other flaws in design and production. The hole for the pin on the leg that folds up looks like it was drilled after the fact with a dull drill bit. The hole is too large, has rough and sharp edges and was done after the paint was applied. The holes on the rotating mount for the engine are not in the proper positions so when you insert the small pin into the too large holes to lock it from turning, the mount is not level. It also doesn't have holes in the right spot to lock engines at 45 degrees or upside down either. Furthermore, when the leg is folded up, it flops around loose and makes the stand want to tip over. I really wanted to like this stand and thought it would be great but I was wrong. It is definitely not worth the nearly $150 price tag and I am giving it 2 stars.

Scritto da: Peter Cunningham

Very strong and love that it folds up easy

The media could not be loaded. This is a very nice engine stand. Assembly is required. It took me about an hour to an assemble. This stand is very heavy duty. It is made from steel and all the welds on it look very good and strong. This has six lock out locations that you can rotate the motor to and and lock it out. So every 60° there is a hole to lock out the motor however you want to position it while working on it which I find useful. Also, the height of the engine stand is nice. It's not to high or to low so working on a motor while in it will allow you to stand straight up and not be bent over, killing your back (I'm 5'11"). It has four 3 1/2 inch caster wheels that have brakes on them. This is nice so that the stand won't roll away on you. It also has one 3 inch caster wheel in the center that takes on the weight when you fold the standard half. This allows you to roll it around and store it while folded in a smaller footprint. I love that this thing is foldable so I can get it out of the way when I'm not using it. For the money, I think the stand is a good value and I recommend it.

Scritto da: kristin

My son is very happy with it.

I got the 1500 lb stand for my son who is a mechanic. The assembly was simple. It's easy to maneuver and moves smoothly. It folds to conveniently store. It's very heavy duty and he's putting it to good use.

Scritto da: mike point

!! THIS WILL NOT BOLT UP TO A CHEVY 350 !!

Don’t waste your hard earned $$ unfortunately I did now I am back to square one looking for another stand or modifying this one . What a shame . Good luck with your search ! Cheers ????????