Safco Products Uber Sedia con schienale medio grande e alta 3491BL, nera, classificata per l'uso 24 ore su 24, 7 giorni su 7, può contenere fino a 500 libbre. (Bracci opzionali venduti separatamente) Poliestere nero

Brand:Safco

3.3/5

898.30

COMFORT MIGLIORATO. Il bordo del sedile a cascata può aiutare a migliorare la circolazione riducendo i punti di pressione mentre si è seduti. REGOLABILE IN ALTEZZA. La leva pneumatica offre una facile regolazione dell'altezza da 19 1/2 a 23 1/2 per una vestibilità comoda e personalizzata. La parte posteriore presenta una regolazione dell'inclinazione con tensione e blocco dell'inclinazione. NOMINALE PER UN UTILIZZO 24/7. Questa robusta sedia da scrivania lavora 24 ore su 24 nei call center, nelle strutture degli operatori di spedizione e in altri ambienti con più turni. Classificato per l'uso 24 ore su 24, 7 giorni su 7 (più di una settimana lavorativa di 40 ore). PIÙ GRANDE, MIGLIORE. La sedia Safco Uber Big and Tall Mid Back Chair offre una comoda seduta per lavoratori di tutte le forme e dimensioni. Il supporto imbottito per la schiena e il sedile girevole a 360 gradi offrono un'opzione ergonomica e confortevole per pesi fino a 500 libbre. 100% poliestere.

COMFORT MIGLIORATO. Il bordo del sedile a cascata può aiutare a migliorare la circolazione riducendo i punti di pressione mentre si è seduti. REGOLABILE IN ALTEZZA. La leva pneumatica offre una facile regolazione dell'altezza da 19 1/2 a 23 1/2 per una vestibilità comoda e personalizzata. La parte posteriore presenta una regolazione dell'inclinazione con tensione e blocco dell'inclinazione. NOMINALE PER UN UTILIZZO 24/7. Questa robusta sedia da scrivania lavora 24 ore su 24 nei call center, nelle strutture degli operatori di spedizione e in altri ambienti con più turni. Classificato per l'uso 24 ore su 24, 7 giorni su 7 (più di una settimana lavorativa di 40 ore). PIÙ GRANDE, MIGLIORE. La sedia Safco Uber Big and Tall Mid Back Chair offre una comoda seduta per lavoratori di tutte le forme e dimensioni. Il supporto imbottito per la schiena e il sedile girevole a 360 gradi offrono un'opzione ergonomica e confortevole per pesi fino a 500 libbre. 100% poliestere.
Age Range (Description) Adult
Assembly required No
Batteries required No
Brand Safco
Color Black Polyester
Country of Origin Taiwan
Customer Reviews 4.2 4.2 out of 5 stars 197 ratings 4.2 out of 5 stars
Department Modern Heavy Duty Chairs
Finish Type Black
Finish types Black
Form Factor Upholstered
Furniture base movement Swivel
Included Components 3491BL
Is Discontinued By Manufacturer No
Item model number 3491bl
Item Weight 40 Pounds
Manufacturer Safco Products
Material Aluminum
Maximum recommended load 500 Pounds
Model Name Uber Big & Tall Heavy-Duty Swivel
Product Dimensions 30 x 27 x 36 inches
Product Dimensions 30"D x 27"W x 36"H
Recommended Uses For Product Office
Room Type Office
Seat Material Type Foam
Shape Chair
Special Feature padded seat
Specifications certified frustration-free
Style Mid Back
Thickness 11 Inches
Unit Count 1.0 Count
Warranty Description Manufacturer limited lifetime.

3.3

6 Review
5 Star
61
4 Star
17
3 Star
11
2 Star
4
1 Star
7

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Fuhrhop
Assembled but it was not easy
I'm okay with the chair as it supports my 400+lbs and is comfortable. Did not order arms. I've assembled four previous chairs similar to this one, obtained from other sources, but this assembly did not happen easily. A reinforcement angle on the chair back support would not allow the back support to simply lay onto the seat base over the screw holes as implied by the instructions. Never had this problem on previous chairs and frustrating. I checked product review comments for insight and one mentioned sliding it under the seat base but they had it taken to a furniture shop and paid for assembly. I stepped away to percolate overnight on my next move. The next day, the assembly process required fell into place and might be of use for others. > Placed the seat on a 24"x48" folding table snug to the wall. > With a large Phillips screwdriver, I loosened the screws holding the seat baseplate to the seat and moved the seat back to the edge of the table. > Held up the chair back upside-down to partially slide the mounting angle under the seat baseplate. > Lifted both the seat and back up so the top of the back was on the table and the seat leaned against the wall. > I leaned into the seat back to push it farther under the seat base. I kept pressure on it as I set the two front hex screws in place and made them finger tight. (Having a log of mass is good for doing this part.) > While still leaning on the seat back, tighten the two screws using the hex wrench, alternating between them to even distribute any pressure until nicely snug but not fully tight. > Set and tightened the other two hex screws snug. > Fully tightened the hex screws at the seat base before fully tightening the other two hex screws. > Tighten the Phillips screws at the rear of the seat base using both hands, followed by the Phillips screws at the front of the seat base. Photo shows an upside-down view seat base with the back attached. After that, it was easy to put the upper chair onto the leg base. For now, this is not chair that adjusts vertically. Not sure how the pneumatic post adjusts when the lever determines whether the seat back tilts or not. The knob under the seat is for tilt tension control although is really doesn't seem to do anything. Figure the chair height is stuck in place. An extra page on the assembly instructions at the Safco website did not help with this issue. Even tried rotating the chair either direction on a whim for adjustment without succeeding. The chair is usable at the low height but I'd really like it to be higher. I did not call Safco for help given that most help centers are pretty useless. (Update 2019-06-04) Height Adjustment Resolved: Yesterday, I thought briefly on the pneumatic piston for height adjustment of the new chair when I envisioned the lever rotating the blade atop the piston. I realized I was not lifting up on the lever with enough pressure to push the blade down and release the hydraulic piston. Stood up, rotated the lever upward fully and the chair popped right up. Sadly, the operating instructions say nothing about this. (Update 2019-10-06) This morning, I rotated while sitting in the chair and the hydraulic piston failed to hold the position, sinking the chair to the lowest height. I never touched the lever. Now, my knees are above my hips. When I stand up, the chair seat lifts up and when I sit down, the seat sinks to the bottom. I rarely changed the height so I'm frustrated by the failure of the piston. Using a few folded towels towels and a large pillow, I'm sitting at my preferred height. I'll contact Safco about it. Even if by some chance I get a new piston assembly, separating the old one from the chair base and seat are essentially impossible in the home environment. Thinking I should've bought a non-reclining chair with the screw-post height adjustment.
Scritto da: John Quincy Public
Best chair for big people I've ever found.
Very sturdy chair with a back that is formed well for good lumbar support. I've always gone for "Executive" style chairs but the last one I had was cheaply made. Kept looking at this one, then one day I noticed a "used" one for a absolute steal. Best I can tell is whoever bought it tried to line the screw holes up for the back and seat and decided it was misdrilled, but once you push it hard enough you can get one lined up to start to line up the rest, best if you have a helping hand. My only issue is the padding on the seat is very firm, figured after a month or two it would break in but it hasn't. Around 2.5 hours of sitting I really need to get up and walk around, but that's something you should be doing anyway. It doesn't look fancy but it's a definite solid build and I enjoy it without arms though you can add it them. Edit: Nov. 22 I was really hoping the seat foam would break in by now and be a bit more plush but to it's credit it's still very solid. Which may be a good thing for you or not. For me, someone with a terrible lower back this chair puts tons of pressure on the lower spine. Sciatic cushions make it worse for me as well. At this point, on my 4th office chair, I feel like I'd need to find a $1600 biggest size Herman Miller to see if any chair will help me. Well built chair, haven't had any quality or durability issues as time has gone on. I'm not changing any on my ratings because in theory the foam not softening is a good thing for a long life.
Scritto da: Hufington
Chair with issues
SHIPPING: The chair arrived via UPS. They left it outside the door of my apartment complex while it was raining while I was home and waiting. It is the shipping company and we see things like that all the time. But if you are living alone and you are buying to use this chair be ready to carry a huge box of approx. 60 lbs. all the way up to the floor you are living, which was 3rd floor in my case and the box was soaking wet! ASSEMBLY: When I started installing the back and the seat, I saw that the metal L shaped part that is attached to the back is very hard to align with the corresponding holes on the back of the seat piece. You definitely need two people to pull and push and press and screw at the same time! It is basically a similar design like in many other chairs I have assembled throughout the years but executed poorly due to the location of the holes and how the seat and back cushions are pressed onto each other where they meet. You definitely need some help to assemble it. Also, it is not very nice that you need to buy the seat arms separately AND they are sent separately arriving much later than the chair. COMFORT: I am 6 ft and 350lbs. When I first sat on the chair, I automatically tried to reach to the lever and lower it as my feet were barely touching the floor. However, I found out that this was already the lowest position. In this position I can barely fit my legs under my desk due to the height! Never had a chair that high and you can make it even higher! The seating surface is too hard for long time sitting. The back is not curved to accommodate the natural curve of your back and it is not comfy. I ended up giving the chair as a gift to someone else and buying a new one.
Scritto da: Alexander
Lowest setting too tall
It's a sturdy chair, and it goes together simply enough. But its lowest setting is still too tall-- there are tables and desks this won't fit under (with me on it), and having the seat so high means that unless you are very tall, your feet do not take up as much of the weight of your legs as they would on a shorter chair-- your buttocks and hips end up supporting more of your weight, which is an important consideration for heavier people.
Scritto da: RAYMOND D
EXCELLENT PRODUIT
- CONSTRUCTION ROBUSTE - BON ROULEMENT POUR LES DÉPLACEMENTS -TRÈES BON CONFORT
Scritto da: Sally
Beautiful chair!
Beautiful chair!! Unfortunately big and TALL, I am short cannot even get my butt all the way on the chair.....

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart