Rain Bird PS50-1S Irrigazione a goccia Paletto per tubi in polietilene da 1/2", lunghezza 6" Paletto in polietilene, confezione da 1

Brand:Rain Bird

3.3/5

€
19.83

DESCRIZIONE PRODOTTO Rain Bird PS50-1S Paletto per irrigazione a goccia 1/2 tubo in polietilene, 6 lunghezze. Il robusto palo in polimero tiene saldamente tutte le marche di 5/8"; 1/2; e il tubo di irrigazione a goccia da .700” ben posizionato. Il design curvo offre un comodo punto in cui la tua mano può riposare comodamente mentre spingi la punta acuminata nel terreno. La parte superiore piatta è abbastanza resistente da battere delicatamente il palo in posizione. Costruito con materiali altamente resistenti ai raggi UV e agli agenti chimici per garantire una lunga durata. 1,25 di larghezza x 6 di lunghezza. Rain Bird L'uso intelligente dell'acqua. DAL PRODUTTORE Rain Bird Corporation è una società privata fondata nel 1933 durante il boom agricolo in California. Siamo riconosciuti come il produttore e fornitore n. 1 al mondo di prodotti e servizi per l'irrigazione. Con uffici vendite in tutto il mondo; offriamo oltre 4.000 prodotti per l'irrigazione a risparmio idrico in più di 130 paesi. Sin dall'inizio, Rain Bird ha prodotto e offerto la più ampia gamma del settore di prodotti per l'irrigazione di alta qualità per: fattorie, campi da golf, arene sportive, complessi commerciali e abitazioni. Negli ultimi 80 anni Rain Bird ha ricevuto più di 450 brevetti in tutto il mondo. Compreso il primo per l'irrigazione nel 1935 sul nostro originale irrigatore a percussione (brevetto USA n. 1.997.901) che ha rivoluzionato la produzione alimentare agricola e ha inaugurato una nuova era nell'irrigazione in tutto il mondo. Nel 1990 questo irrigatore a impatto originale è stato designato come punto di riferimento storico dall'American Society of Agricultural Engineers. I nostri prodotti coprono tutti gli aspetti dell'irrigazione... timer/regolatori, irrigatori rotanti pop-up, irrigatori a testa di spruzzo pop-up, ugelli per irrigatori, valvole di irrigazione, irrigazione a goccia, drenaggio e molto altro. Questi prodotti sono stati scelti e installati in tutto il mondo nei più grandi e prestigiosi progetti per l'irrigazione residenziale, commerciale, agricola e dei campi da golf. Rain Bird si impegna per The Intelligent Use of Water™ che va oltre i prodotti all'istruzione, alla formazione e ai servizi per l'industria e la comunità. La nostra eredità è progettare e produrre solo prodotti di altissimo valore e qualità. Siamo grati di aver ricevuto numerosi premi di riconoscimento da molti dei nostri stimati partner. Rain Bird “L'uso intelligente dell'acqua

Quantity

Aggiungi al carrello Compra subito

EAN: 0093674497801

Categories: Patio, prato e giardino, Giardinaggio e cura del prato, Strutture di sostegno delle piante, Paletti da giardino,

Costruito con materiali altamente resistenti ai raggi UV e agli agenti chimici per garantire una lunga durata. 1,25 di larghezza x 6 di lunghezza. Disponibile solo in colore nero. Il gancio curvo tiene saldamente in posizione il tubo. La robusta struttura in polimero non arrugginisce. Fissa saldamente tutte le marche di 5/8”; 1/2; e tubi di irrigazione a goccia da .700” nel terreno.

Brand	Rain Bird
Color	Black
Country of Origin	Australia
Customer Reviews	4.2 4.2 out of 5 stars 424 ratings 4.2 out of 5 stars
Item Dimensions LxWxH	4.3 x 2.1 x 5.88 inches
Item model number	PS50-1S
Item Weight	0.04 Pounds
Item Weight	0.637 ounces
Manufacturer	Rain Bird
Material	polymer
Number of Pieces	1
Product Dimensions	4.3 x 2.1 x 5.88 inches
Style	Poly Stake

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: J. Starmer

Drip Irrigation Project!

This review is for a variety of products all in one. This spring (2013) my wife and I put in 2 4'x20' raised bed gardens in the back yard for growing flowers and veggies. We live in Tennessee and the middle of the summer is hot and dry. I wanted a way to keep the plants watered and decided to convert a "spray zone" of our irrigation system to drip. I set up the garden with short rows that run the width of the boxes. I designed the garden with lots of short rows that run the 4' width of the boxes. Imagine a railroad track. The rails are the "feeder lines" that run the length of my setup, and the drip lines are the railroad ties that cut across the width of the garden (parallel with the rows of plants). I needed "feeder line" to bring the water to the drippers, and a variety of connectors to put it all together. I planned it all out on paper first, and then made sure I purchased enough parts. I purchased the following products for my setup: Rain Bird Landscape Dripline System 1/2-Inch Emitter Tubing With 18-Inch Spacing - 100-Foot Roll (5 stars) Rain Bird BT50-4PK Landscape Dripline System 1/2-Inch Barbed Tees, 4 Pack (5 stars) Rain Bird BE50-4PK 1/2-Inch Barbed Elbows (5 stars) Rain Bird EC50-Rain Bird GS50-10PK Landscape Dripline System 1/2-Inch Galvanized Wire Secures, 10-Pack (4 stars) 2PK Landscape Dripline System 1/2-Inch End Closure Fittings (5 stars) Rain Bird Landscape Dripline System Spray Head To Drip Connection Kit (5 stars) Rain Bird T63100-BULK 1/2-Inch 100-Feet Landscape Dripline System Blank Tubing Roll (5 stars) These parts were all high quality, and I am extremely pleased with the setup. I cut all the tubing to size and layed it all out prior to putting it all together. It is very difficult to fit the tubing over the barbs, but once on it stays in place and doesn't leak. My hands ached after putting a bunch of the tubing together, so I ended up using leather work gloves which made things go a lot better. A few things to note: 1) I don't have a rainbird setup, and this kit fit in great with my existing irrigation system. 2) The tubing is a bit stiff and can kink easily, but works very well, so be careful when connecting things. 3) The tubing and barbs are not the same inner diameter as stuff you can get at plumbing supply or home improvement centers. That means you can't mix and match, which is ok with me. 4) I used some teflon plumbers tape when attaching parts that screw in.

Scritto da: Jean I.

Problem solved!

We moved into our house about 11 years ago and have an extensive sprinkler system that covers the 13 (5 in the back yard, 4 in the side yard, 4 near the front entrance) pots in our yard. Over time, the wire stakes that hold down the hoses rusted and fell apart. It drove me nuts because the hoses would pop up between the flowers and detracted from the beauty of the colorful flowers. I looked everywhere (hardware stores, gardening stores) and couldn't find a solution - and then I checked Amazon and voila! Problem solved and I have some extras for the future! Thanks much!!

Scritto da: MNT

Didn't get the ones with the bend

Great metal hose stakes, but are not the same as the pictures. These do not have a bend/notch in the stake legs as depicted. This would have given better retention in the soil. Overall not bad, but not like the picture.

Scritto da: PMH

Great product

I read reviews on this product before purchasing and my main concern prior to ordering was their being expensive and quality for the price. I only needed 20 of these to secure some irrigation system soaker hoses further into the ground where a few had popped up so I took a chance and ordered 2 packages. I will say they worked VERY well for my use. The material is steel and very strong. I was able to use a hammer to sink these into the ground without any dents or compression to the wire. The spacing is perfect to fit the hoses inside, not too snug or large. The notch seems to help hold these into the ground, especially in areas where the hose is near the surface because of some nearby tree roots and areas where the hoses were placed in a tight arc around a bush or plant. Overall, I would purchase these again and would highly recommend.

Scritto da: P. Ranalli

I tried regular garden staples for landscape cloth and they pull up too easily. That little bump that these have toward the ...

These are overpriced IMO, but they work extremely well. I tried regular garden staples for landscape cloth and they pull up too easily. That little bump that these have toward the bottom of the spike makes all the difference in the world with keeping your drip irrigation line down. They save you a lot of headache down the line compared to other options out there. Easily 5 stars if they were 25%+ less expensive (let's say, $5/pack or less).

Scritto da: jackie

Keeps my house from flying away...

These hold my greenhouse in place and the wind doesn't carry it away. Not my actual house, wouldn't that be something. Their actually very sturdy and nicer than some of the other stacks or loops you will find in stores. They look sturdy and rust resistant. I have a pretty wet backyard and these seem to be holding up well. Only downside is they are a bit on the expensive side.

Scritto da: Dee Garza

Perfect for pegging roses!

These are perfect for pegging roses! They are a good, heavy metal and are galvanized so they won't rust. They are also long enough to go deeply into the ground to hold the end of a rose branch. Pegging allows me to take the long, laterally growing branches from a rose that is a climber and be looped, bring the long loops over to meet the plant itself. This causes more roses to bloom and it helps contain the plant to a smaller size. Eventually this rose will climb up higher into a tree's branches (I planned it that way) but right now this keeps the long, lateral branches from growing out to the street. And I'll get more roses! Thanks, Amazon, for making it easier for me to find the things I need.

Scritto da: covenant

Not as pictured..

Yes, others made this comment. I didn't believe them but it is true. Only gave a two star so people will read this. I would have given a negative one if it was an option. Product imaged on AMAZON and on the packaging have "ridges" that absolutely do grip the ground better than the much less expensive straight leg "staples". I am willing to pay extra, a lot extra for these "ridges", they work that well. This seller is selling something.. no ridges.. just like the much less expensive "staples" for the more expensive "ridges" price. Returned and went to the local home improvement store which had Rain-Bird "ridges"..

Scritto da: Tricia

Stays put without rusting

These came with my rainbird irrigation kit and I bought more because they were good quality. Stays put in the ground without rusting, good for anchoring mesh netting, hoses and tubes.

Scritto da: Rujo

Not as described

Hold down clips are not reflective of the photo, missing the offset in the legs as shown on the package and the photo

Scritto da: Mary

the kink in both leggs of the stake was not there.

It is not as shown. there is not kink in the stake's leg.

Scritto da: Stephen Pate

Works as intended

I got these for a drip irrigation project but also find them handy for holding down landscaping cloth. Easy to insert without a hammer. Bend if hammered.

Scritto da: Kathleen E. Dodge

Not as pictured

These stakes do not have the kink in them as pictured. They are straight u-bend staples.