Proxxon 27028 Mandrino con bussola scorrevole per contropunta di DB 250, argento

Name: Proxxon 27028 Mandrino con bussola scorrevole per contropunta di DB 250, argento
Brand: Proxxon
SKU: 0785533493177
Price: 44.57 EUR
Availability: InStock

Brand:Proxxon

3.5/5

€
44.57

DESCRIZIONE PRODOTTO Mandrino con bussola scorrevole per la contropunta del DB 250. Morsetti fino a 13/64 (5,0 mm). Viene inserito nel punto del centro posteriore rotante. Il movimento di avanzamento risulta dallo scorrimento dell'intera contropunta. DAL PRODUTTORE Mandrino Proxxon per la contropunta per il DB250, numero 37020 micro tornio per legno. Proxxon ingegneria tedesca di precisione, capacità di serraggio 13/64 pollici (5 mm). Sostituisce il centro live. Il movimento di avanzamento risulta dallo scorrimento dell'intera contropunta.

Prodotto non disponibile

EAN: 0785533493177

Categories: Strumenti e miglioramento della casa, Utensili elettrici e manuali, Parti e accessori per utensili elettrici, Parti e accessori per tornio, Accessori,

Power-Sand-Blaster-Accessori. Strumenti di precisione di alta qualità. Peso ridotto e design sottile, senza mai compromettere le prestazioni. Silenzioso, preciso e privo di vibrazioni per un utilizzo senza fatica.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Proxxon
Color	‎Silver
Compatible Devices	Lathe
Customer Reviews	4.5 4.5 out of 5 stars 225 ratings 4.5 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item model number	‎27028
Item Package Quantity	‎1
Item Weight	0.18 Pounds
Item Weight	‎2.88 ounces
Manufacturer	‎Proxxon
Part Number	‎27028
Product Dimensions	‎3.74 x 3.31 x 2.17 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Hovey Corbin

Conducting baton handle machining

My son and I make custom conducting batons, and I needed a drill chuck for My Proxxon micro-lathe to allow me to drill precisely centered holes in the end of the baton blanks during the machining process. The drill chuck fits my micro-lathe perfectly and now I can drill precise holes in the baton blanks with ease so that the balance weight I install is perfectly concentric. I am happy with this purchase

Scritto da: Wisecarver

Handy but can be improved.

It's very handy but I do wish it was keyed, not the spin-tight like Dremel has. Nice thing is, it comes off the shaft, so this does allow me to put a better chuck on it, still a good price.

Scritto da: Jeremiah Warthog

Drill chuck with sleeve for Proxxon Micro Lathe

This is necessary for many lathe functions, such as drilling concentric holes in a workpiece. It works as intended and is of reasonable quality. Easy to install and remove. Utilitarian item; no complaints.

Scritto da: xfourpower

Four Stars

works like a charm

Scritto da: Amazon Customer

Good for holdin small number size drill bits

Works well with my new proxxon lathe

Scritto da: Agostinho Araujo

Five Stars

Awesome quality, I do recommend this product. Good deal.

Scritto da: C.C.

Four Stars

Works fine!

Scritto da: Will

You need it already

Well designed and built. Perfect accessory for your Proxxon lathe. Buy one already!

Scritto da: Hopjumpskip

Drill chuck is ok, but the Proxxon Micro system isn't

I wanted to use this on some beech wood pieces I was making on the Proxxon Micro 250 lathe. But the tail stock is so wobbly, even after putting in alum tape. And the motor doesn't have enough power to drill even a small hole with a brand new quality drill bit. I even tried tapping in a hole to break the wood fibres. The chuck itself is fine as it is, but the motor power + wobbly alum setup doesn't make for a good drill. I'm sure this is fine on softer woods like limewood etc, just not hard woods, especially going into end grain. I'll have another go at it and try to find a way, but I'm not that hopeful. UPDATE: Haven't tried using it as a drill chuck again yet, but it's actually great on the other side to hold stock instead of using the crappy collets. Just used one of the collets that fit and voila! I can easily remove a piece by hand to check it over, or swap for another without fussing with those two spanners. I've only used this on limewood, but I'll have a go with something harder to see if works, but it should be fine. Works better this way than an actual drill chuck.

Scritto da: Kirk Stringer

Great for my mini lathe

Bought to use with my mini watch makers lathe, fits perfect and does exactly what I want.

Scritto da: Sanda

Very useful, nice quality

This chuck is actually for a Proxxon lathe, but my issue wasn't to do with a lathe. I needed to drill holes only 0.75mm diameter, but my usual chuck couldn't grip drills that small. So I got this little chuck and fitted it into the normal standard one!

Scritto da: Ernie S.

The drill chuck is ready for use out of the box.

It is a part that works very well. Drill bits are held true and the device is perfect for the price. I have used the chuck for accurate model work and have no complaints.

Scritto da: Amazon Customer

Quality Item

Arrived on schedule. Well packaged and exactly as described.