Prime-Line 9056104 Viti a testa esagonale, 3/8" X 1-1/2", acciaio inossidabile grado 18-8, (confezione da 25)

Brand:‎PRIME-LINE

3.7/5

47.27

I bulloni a vite mordente vengono utilizzati al posto delle viti per legno standard ogni volta che la superficie di montaggio deve sopportare un carico pesante. La testa esagonale consente di serrare le viti a testa esagonale con una coppia maggiore di quella che può essere utilizzata sulle viti a testa Phillips, sebbene sia ancora necessario un foro pilota prima dell'installazione. Si noti che le viti a testa tonda non accettano dadi in quanto sono viti per legno tecnicamente spesse e pesanti con filettature progettate per tagliare il legno. Sono ideali per l'uso sui ponti poiché l'installazione può essere eseguita senza avere accesso a entrambe le estremità del dispositivo di fissaggio, al contrario dei bulloni esagonali standard che richiedono un dado sull'estremità opposta.

Tipo di filettatura: profonda, stile a punta: succhiello. Richiede il foro pilota da praticare e si installa utilizzando una chiave inglese o uno strumento a bussola. Utilizzato in applicazioni in cui le viti per legno standard non possono sostenere il carico (costruzione di ponti, ecc.). Presenta filettature profonde per legno e non accetta un dado. Vite per legno resistente con testa esagonale a 6 lati. Dimensioni: 3/8 pollici X 1-1/2 pollici.
Assembled Diameter ‎0.38 Inches
Batteries Required? ‎No
Brand ‎PRIME-LINE
Color ‎Zinc
Customer Reviews 4.7 4.7 out of 5 stars 85 ratings 4.7 out of 5 stars
Cutting Diameter ‎0.38 Inches
Drive System External Hex
Drive System ‎External Hex
Exterior Finish Stainless Steel
Exterior Finish ‎Stainless Steel
Fastener Size ‎3/8"
Fastener Type ‎Wood Screws
Finish ‎stainless steel
Head Style Hex
Head Style ‎Hex
Head Type ‎Hex
Included Components ‎Lag Screw Bolt
Item Dimensions LxWxH 4 x 4 x 2 inches
Item Dimensions LxWxH ‎4 x 4 x 2 inches
Item model number ‎9056104
Item Package Quantity ‎1
Item Weight ‎1.1 pounds
Manufacturer ‎Prime-Line
Material Stainless Steel
Material ‎Stainless Steel
Measurement System ‎Imperial
Metal Type ‎Stainless Steel
Number Of Pieces ‎25
Part Number ‎9056104
Product Dimensions ‎4 x 4 x 2 inches
Size ‎3/8 in. -16
Thread Class ‎Others
Thread Coverage ‎Partially Threaded
Thread Size ‎3/8"
Thread Style ‎Right Hand
Tool Tip Description ‎Hex
Usage ‎Wood

3.7

8 Review
5 Star
86
4 Star
5
3 Star
5
2 Star
0
1 Star
3

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: R Storey
Slightly smaller than nominal size listed
Not exactly as pictured. Listed and labeled as “3/8 inch” (which is 0.375) but they are slightly smaller. The picture on Amazon shows a full-size shaft just under the bolt head tapering off to a smaller diameter where the threads start. But on the actual bolts, there is no full-diameter shaft and the threads start immediately under the bolt head. The spec for hex lag screws (ASME B18.2.1-1996) calls for a major thread diameter range of 0.360-0.388. These bolts are at the low end of that range, nowhere near 0.375. I measured three bolts, all three at 0.360. So, officially, they are in spec, but if you need them to really be 3/8…like I did…they’re not. For my application, I was counting on the full-diameter shaft under the head, as pictured (to fully occupy a hole in a metal mounting plate), but they don’t match the picture. If you need a bolt with full-diameter threadless shaft portion under the head, order a longer length. If you need the lag screw to be closer to 3/8, I suggest contacting the manufacturer and asking before ordering. I won’t buy this brand again, there are other, higher quality sources.
Scritto da: john spolski
Stainless Steel Bolt with Wood Grip Threads
As with all stainless steel products you never know what the quality of the metal is until you expose it to salt water. If it passes the test I will then give it five stars.
Scritto da: sam 1
A 1
Very good material
Scritto da: D. Smith
Good Quality at a great price
No problems with this product worked exactly as it should, I used these to install a Aux Fuel Tank in my Truck.
Scritto da: Lloyd Ames
Four Stars
Very good lag screws.
Scritto da: wcsdancer123
Five Stars
exactly what I needed to attach a J pole HDTV antenna mount in the attic.
Scritto da: Roger N. Fry
Five Stars
Superb quality at a great price.
Scritto da: Doug m
Good product
Good product

Prodotti correlati

hot

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart