POWERTEC 70179 Raccordo a Y da 2-1/2" Connettore per tubo di raccolta polvere Connettore per tubo da 2,5"

Brand:POWERTEC

3.6/5

38.74

Presentazione del connettore per tubo di raccolta della polvere con raccordo a Y da 2-1/2 pollici di POWERTEC. Questo raccordo è comunemente usato al posto dei raccordi a "T", fornendo una transizione più fluida alle linee principali ramificate dove i limiti di progettazione non ne consentiranno l'uso per percorsi sopraelevati. Ancora più importante, troverai questo connettore per tubo collettore di polvere da 2-1/2 pollici come una risorsa preziosa per mantenere la tua officina pulita e priva di polvere. Costruzione premium Realizzato con robusta plastica ABS, questo connettore per tubo è resistente, altamente durevole e in grado di resistere all'usura comunemente associata all'uso abrasivo e ad alto volume. Non si collegherà direttamente ad altre porte OD 2-1/2". Diametro esterno: 2-31/64"

Prodotto non disponibile
DIMENSIONI: Tutte e tre le estremità nominali da 2-1/2 pollici misurano 2-31/64 pollici OD e 2-7/32 pollici ID
Batteries Included? ‎No
Batteries Required? ‎No
Brand POWERTEC
Brand ‎POWERTEC
Color Black
Color ‎Black
Country of Origin ‎Taiwan
Customer Reviews 4.6 4.6 out of 5 stars 543 ratings 4.6 out of 5 stars
Exterior Finish ABS
Exterior Finish ‎ABS
Included Components ‎Fitting
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 6.5 x 2.5 x 5.5 inches
Item Dimensions LxWxH ‎6.5 x 2.5 x 5.5 inches
Item model number ‎70179
Item Package Quantity ‎1
Item Weight ‎3.2 ounces
Manufacturer ‎POWERTEC
Material Acrylonitrile Butadiene Styrene
Material ‎Acrylonitrile Butadiene Styrene
Measurement System ‎inch
Number Of Pieces 1
Number Of Pieces ‎1
Part Number ‎70179
Product Dimensions ‎6.5 x 2.5 x 5.5 inches
Size 2.5 Inch
Size ‎2.5 Inch
Style ‎2.5" Hose Connector

3.6

13 Review
5 Star
73
4 Star
17
3 Star
7
2 Star
1
1 Star
1

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Daniel
Works great for me
Needed a little more suction power when I demo tile, now I run 2 rigid 6,0 vacuums into a oneida dust collector then a 2 1/4 inch 20 foot hose into the dust collection sleeve I made for my jack hammer, pretty much eliminates dust, probably about 75-90%, makes for happy clients, I only gave it 4 stars because it really doesn’t go from box to vacuum hose, but still managed to make it work with adapters hoses that came with the dust collector
Scritto da: Rodolfo Pinto
Doesn't fit a standard vacuum.
I wanted to split the hose from my vacuum so I could have my table saw and miter saw attached to the vaccum all the time. Although this conector doesn't really fit on a standard size vaccumm hose. I had to heat it up to make it soft so it could expand and fit the vaccum. Still it didnt work, the vaccum loses power when splitting the hoses .
Scritto da: Lawrence J.
Does the job nicely!
I use it to hook a big vacuum to 2 pickup ports on my skate sharpening equipment.
Scritto da: Ziggy Q. Bozo
worked fine.
I used this to split my shop vac to the base and rear of my compound miter saw.
Scritto da: Alan
Size doesn’t work fior me
Quality is good. Thickness is fine. Size of inlet is ok but the two outlets are too big to except the hose from my Ridged shop vac
Scritto da: pamela flores
JURY'S IN
Well made of Quality material. It does what it's supposed to do. Direct air!!!
Scritto da: stillafewleft
Inadequate item description, items do not fit together, no customer service.
I ordered various Powertec couplings and big gulp dust hood to make a hood / dust collection system for my table saw. I intentionally ordered all items from one brand to avoid fit-together hassles. Unfortunately nothing fits together or onto my shopvac hose or shopvac inlet. Sometimes the stated connection diameter is OD, sometimes it is ID, Is it so hard to include in the item description both ID and OD measurements? The items would work for the intended purpose if proper connection were possible. Amazingly, the company website product listing does not include double sided, preferably stepped, male connectors that would enable these things to connect. I wrote the company over a week ago through its website for advice on how to connect these things - no response. I'll try duct tape, or maybe a flexible rubber coupling can be made to work. Inadequate item description with no customer service.
Scritto da: Terence M.
Fit for Purpose
Ordered this to use on a new router table to take dust from both the fence and underneath the table. Fitted by 2 1/2" hose a treat. Quite a robust duct and very pleased with my purchase.
Scritto da: WS
There are better affordable options
Way to much $ for something that isn't compatible with most standard vacuum size or plumbing couplers. Wish I had done more research before buying. But you can spend more $ on "powertec" couplers and clamps and hose to fit their own brand.... Do yourself a favour and go to the hardware store and figure something out...or check out other providers products... There this Valley where Lee lives, way more affordable. I ended up buying 1 1/2" abs pipe coupler, which slides inside the y fitting and other powertec products..... disappointed.
Scritto da: D&A
Doesn't fit 2 1/2" ShopVac hose.
It's so hard trying to find a y-fitting that will actually connect to ShopVac 2 1/2" hose. You'd think that the fitting would either fit into or fit over the standard size, but no! It's exactly the same size as the hose!! So annoying.
Scritto da: Amazon Customer
not easy to connect
solid product. does not connect to 2 1/2 " hose. I do not understand why these companys can't make a product that easily adapts and fits together with standard wet / dry vacums.
Scritto da: Stephen CameronSmith
Good Quality
Simple piece. Well made and sturdy. Size is accurate
Scritto da: Francois Simard
Très bien
Très bien

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart