Nuovo tappo serbatoio Stens 125-352 compatibile con/sostituzione per John Deere AM35120

Brand:Stens

3.2/5

57.13

**Verificare che la parte si adatti prima dell'acquisto**Specifiche:Descrizione: Tappo serbatoioPer 6 1/4 di profondità del serbatoioFilettatoCon manometroEtanolo: Non compatibile con più del 10% di carburante con etanoloID: 2Prodotto da: Un fornitore OEMSostituisce i numeri OEM:John Deere: AM143249, AM35120Compatibile con/Sostituzione per: John Deere: 300 (controllare la lunghezza), 312, 314, 316, 3 17 e 400

I ricambi a marchio Stens sono considerati affidabili dai rivenditori professionisti per eseguire riparazioni di qualità OEM. Il nome Stens è presente su tutte le confezioni dei prodotti Genuine Stens. La garanzia di 1 anno Stens garantisce affidabilità e prestazioni per ogni parte. Siamo fiduciosi che i nostri prodotti funzioneranno perfettamente, ma nel raro caso in cui ciò non accada, lo sostituiremo in qualsiasi momento entro un anno dall'ordine. Compatibile con/sostituzione per: John Deere: 300 (controllare la lunghezza), 312, 314, 316, 317 e 400. Sostituisce i numeri OEM: John Deere: AM143249, AM35120. Specifiche: Descrizione: Tappo serbatoio, Per profondità serbatoio 6 1/4, Filettato, Con manometro, Etanolo: Non compatibile con carburante con etanolo superiore al 10%, ID: 2, Prodotto da: Un fornitore OEM.
Brand Stens
Closure Type Twist On
Color Black
Customer Reviews 4.2 4.2 out of 5 stars 253 ratings 4.2 out of 5 stars
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 12 x 7 x 4 inches
Item model number 125-352
Item Weight 0.2 Pounds
Item Weight 3.2 ounces
Manufacturer Stens
Product Dimensions 12 x 7 x 4 inches
Style Professional

3.2

13 Review
5 Star
62
4 Star
15
3 Star
11
2 Star
4
1 Star
8

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: No name
Looks good
I haven't installed it yet but it looks like the original. I'm sure it will work fine.
Scritto da: Amazon Customer
Fit perfectly
There are some differences between the JD models and tank depths. This fit my father-in-law's 317 perfectly, and the gauge actually works.
Scritto da: Larry
Is There Gas?
This unit fits very nicely as a replacement in my old Bolens garden tractor fuel tank. The old one was unreadable due to clouding of the lens. This one fits perfectly but seems a little off on the reading of how much fuel is really in the tank. Reads a little below 1/2, and when I measure it, it is a little above 1/2. Better to be safe than sorry.
Scritto da: ERIC COLLINS
Good product . Maybe more realistic measurements
Good product
Scritto da: HC Customer
Fuel cap
Got this as a replacement for my Craftsman lawn tractor. Fits well and seems to be fairly accurate, but then I don't worry about being stranded out on the road because of it. The price was right and it does what it's supposed to do so I'm happy.
Scritto da: Amazon Customer
Did not fit my Dayton generator, but hay free returns you can’t go wrong!!!
I took a shot in the dark and bought this for my Dayton 4000 watt generator with a 4 gallon tank and it was to long. I returned it to amazon with no issues. This product looked to be of good quality.
Scritto da: RF
Good cap, does the job
Good cap, does the job. Fuel level not accurate as I would have needed one with a longer float assembly for my tractor, but at over double the price for legit JD one, it's not worth it. I'll take cheap and good enough. Not like I'm going to be miles from home with it or something, I can always walk back to fuel. Would be accurate if this was the proper replacement for your tractor.
Scritto da: Howard Ferstler
Replaced an inadequate one on a generator
I got this a couple of years back and it replaces a version on a Troybilt 8 kW portable generator. The original did not reach far enough down into the tank to give readings when the gas level went below about 3 gallons - in a 7-gallon tank. (An idiot must have chosen that gauge for use with the generator.) I did have to slightly modify the new version to get the bulb to reach right down to the tank bottom, and now it gives a reading down to about 1.5 gallons. (Below that I use a wooden dipstick, with gallon-level markings that I built.) There is no way a bulb gauge could work any better than this, due to the flotation requirement. Howard Ferstler
Scritto da: Tracey Scott
Fast shipping
This product arrived quickly and fit perfectly on the John Deere tractor.
Scritto da: Terry
Fuel cap
Works exactly for what we needed it for
Scritto da: Owad
Fits JD314 tractor
Fits my JD314 hydrostatic tractor, not accurate at all, but I don't care much for that.
Scritto da: Clinton S.
Works good
Used on a 4 gal boat tank.
Scritto da: Rick Strom
wrong unit
The description says its for a JD 316, too short for mine

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart