MAGBIT 704.0816 MAG704 1/2 pollice per 13 pollici punta a trivella singola

Name: MAGBIT 704.0816 MAG704 1/2 pollice per 13 pollici punta a trivella singola
Brand: MAGBIT
SKU: 0722170704167
Price: 38.71 EUR
Availability: InStock

Brand:MAGBIT

3.6/5

€
38.71

DAL PRODUTTORE Punta a coclea a sperone singolo per un foro di entrata e di uscita più pulito e un gambo a cambio rapido che funziona con mandrini standard e a cambio rapido

Quantity

Aggiungi al carrello Compra subito

EAN: 0722170704167

Categories: Strumenti e miglioramento della casa, Utensili elettrici e manuali, Parti e accessori per utensili elettrici, Parti e accessori per trapani elettrici, Punte da trapano a coclea, Punta del trapano,

Lavorato su un palo centrale per una punta più forte e rigida. punta della vite autoalimentata per un avvio più veloce del foro e un taglio più facile. Attacco esagonale da 7/16 pollici a cambio rapido per l'uso in mandrini a cambio rapido o mandrini standard. Utilizzare quando una punta da 6 pollici è troppo corta e 18 pollici è troppo lunga per il foro. Acciaio al carbonio 1045 in acciaio di alta qualità per una maggiore durata.

Brand	MAGBIT
Brand	‎MAGBIT
Country of Origin	‎Taiwan
Customer Reviews	4.5 4.5 out of 5 stars 105 ratings 4.5 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item model number	‎704.0816
Item Package Quantity	‎1
Item Weight	‎7.2 ounces
Manufacturer	‎Magnus Industries Inc.
Material	Alloy Steel
Material	‎Alloy Steel
Minimum Bore Diameter	0.63 Inches
Minimum Bore Diameter	‎0.63 Inches
Package Dimensions	‎13.19 x 0.71 x 0.59 inches
Part Number	‎704.0816
Shank Type	Hex
Shank Type	‎Hex
Surface Recommendation	‎Alloy Steel
Tool Flute Type	Spiral
Tool Flute Type	‎Spiral
Warranty Description	‎Return defective products to place of purchase for exchange or credit. Warranty does not apply to damage caused by abuse, misuse or alteration.

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Hank Williams

You get what you pay for

I only needed a dozen or so - foreseeably - in this size and the Irwin was out of stock - so I bought this thing. It's not an Irwin; the cost was cheap and the result is about what I expected. I own extended augers in 7/16" (lag screws) 9/16" (1'2" carriage bolts) , 13/16" (3/4" pins) all in Irwin and all used well over time so I have an opinion and a references to back it up. This got the wobblies - out of straight - on the first hole. The good news is the temper is so bad I straightened it in the drill chuck. The bad news is . . . I could straighten it in the drill chuck. I babied my way through the landscape timbers and got it done. But I will buy an Irwin the next time this diameter comes up. It will just make this size the most expensive in the lot.

Scritto da: John S. Reid

Used and abused for drilling holes in my lawn

I bought this drill bit to drill holes in my lawn for small-area aeration. It was the only tool I could find for this application. (All of the lawn "coring tools" plugged-up with the core.) I was amazed that this drill bit kept on going even when drilling dirt. It has not lost any ability to drill into hard dirt even after extensive use. A plus for this use is that it does not extract a core, but rather pulls out ground-up dirt from the hole, thus making it easier for the extracted soil to reintegrate with the lawn.

Scritto da: Young Jedi

A Very Sharp and Strong Auger Bit

I have been using this bit to drill holes in several oak and elm tree stumps in my yard to speed up the decomposition process. This bit drills right up to the chuck on the drill with no problem. It helps to pull it out and clear the flighting when it gets really deep in the bore, but otherwise, it clears the cuttings well. I’ve run about fifty holes in so far, and it’s still sharp. Other bits I’ve used get dull quickly in the hardwood, or break off under load. Not this one.

Scritto da: James R. Vile

Excellent bit

Went thru railroad ties like a hot knife thru butter.

Scritto da: Charles F. Smart

Amazing for the money - for any cost really

I’ve drilled over 30 holes through 5-6” stack ups of pressure treated pine and cedar posts and this thing basically pulls itself through. Still sharp as the day it arrived. Would not hesitate to buy it.

Scritto da: Joshua N.

13" overall length, about 10.5" usable

I was looking for a drill bit that would drill 10 1/4" deep, so I bought this. It's listed as a 13" drill bit. Maybe I missed something saying how long the usable length is, but this bit is 13" overall length, which means after you chuck it up your left with about 10.5" of usable length. It'll work for my application but if you need more than that this 13" bit won't get you there. Would be nice if that was readily available before purchase. Will update after im done using it and see how it holds up. Update. If you plan on drilling through anything but super soft wood, stay away. It bent like a banana after drilling one hole. The core of the bit is only about 1/16 with he flutes running up it, see photo compared to a good drill bit. It may be good for really light use but a drill bit this long needs to be much sturdier

Scritto da: Gary P. Jones

Great bit

Have drilled over 50 holes through 6" yellow pine. About another 50 holes to go. Still sharp enough to cut my finger. Will buy again.

Scritto da: Bryan Duvall

Amazing bit

No matter what the other reviews say , I’m a woodworker / carpenter this bit is by far the best I’ve ever used , very sharp and pulls right thru the wood clean.