Lutron Toggler LED + interruttore dimmer

Brand:Lutron

3.6/5

53.98

DESCRIZIONE DEL PRODOTTO Questi dimmer Lutron sono progettati per sostituire o abbinarsi ai tuoi interruttori in stile tradizionale. Risparmia energia e prolunga la durata della lampadina con l'interruttore a levetta Toggler facile da usare e il piccolo dimmer a scorrimento. L'interruttore Toggle-Style ritorna automaticamente al livello di luce preselezionato preferito. Funziona con lampadine dimmerabili CFL e LED. Utilizzare la diapositiva per selezionare il livello di luminosità desiderato. Può essere utilizzato in installazioni unipolari o a 3 vie. Finitura: Light Almond Funziona con luce fluorescente compatta da 150 W/led o 600 W a incandescenza/alogena Può essere utilizzato in installazioni unipolari o a 3 vie L'interruttore a levetta accende la luce al livello impostato dal cursore e anche spenta La slitta regola la luce al livello di luce desiderato. DAL PRODUTTORE Controlla i tuoi CFL e LED dimmerabili con i dimmer C.L dimmerabili di Lutron! Le lampade fluorescenti compatte (CFL) dimmerabili avvitabili e le lampade a diodi a emissione di luce (LED) dimmerabili avvitabili sono un'ottima alternativa a risparmio energetico alle sorgenti luminose a incandescenza o alogene; tuttavia, attenuarli potrebbe essere difficile. I nuovi dimmer Lutron con tecnologia HED forniscono una soluzione per alleviare le sfide dimmerabili CFL e LED, impostando il giusto livello di luce per migliorare l'atmosfera e l'atmosfera. Installa il Toggler C•L Dimmer per ammorbidire la luce delle tue lampadine ad alta efficienza regolando la discreta diapositiva sulla luminosità desiderata. Quindi utilizzare l'interruttore per spegnere completamente le luci o accenderle al livello preimpostato. I dimmer Lutron con tecnologia HED forniscono inoltre un'ampia gamma di dimmer per lampadine alogene e a incandescenza, assicurando che il dimmer di oggi sia compatibile con le sorgenti luminose di domani. Il dimmer può persino attenuare un carico misto di sorgenti luminose (ad es. LED e lampadine alogene o CFL e LED sullo stesso circuito), abbinando l'aspetto degli interruttori a levetta esistenti.

Può essere utilizzato in applicazioni unipolari o a 3 vie, in cui le luci sono controllate da una o due postazioni. Tecnologia brevettata Lutron per ottimizzare la gamma di luminosità della tua lampadina ed evitare interferenze con altri dimmer in casa. Funziona con un massimo di 150 Watt di lampadine LED/CFL dimmerabili o 600 Watt di lampadine a incandescenza/alogene. Fornisce oltre 250 livelli di illuminazione in modo da poter creare la luce perfetta per qualsiasi attività. Testato su migliaia di lampadine e dozzine di marche per un oscuramento senza sfarfallio. Per l'elenco delle lampadine consigliate, vedere le Specifiche tecniche.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Lutron
Color ‎Light Almond
Connector Type Screw
Country of Origin ‎China
Customer Reviews 4.5 4.5 out of 5 stars 2,244 ratings 4.5 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Included Components ‎Lutron Toggler LED+ Dimmer Switch for Dimmable LED, Halogen and Incandescent Bulbs, Single-Pole or 3-Way, TGCL-153PH-LA, Light Almond
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎Yes
Item model number ‎TGCL-153PH-LA
Item Package Quantity ‎1
Item Weight ‎3.68 ounces
Manufacturer ‎Lutron
Material Plastic
Material ‎Plastic
Mounting Type Panel Mount
Mounting Type ‎Panel Mount
Operation Mode Toggle
Part Number ‎TGCL-153PH-LA
Product Dimensions ‎2.3 x 4 x 6 inches
Size ‎1 Pack
Style ‎1-Pack
Switch Style ‎Dimmer Switch
Switch Type ‎3-way
Warranty Description ‎1 year limited warranty on materials and manufacture
Wattage ‎150 watts

3.6

13 Review
5 Star
75
4 Star
14
3 Star
5
2 Star
2
1 Star
4

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Nellebelles
Review of Lutron TGCL-153P-WH-2 --- Yes, These Work Perfectly for Dimmable LED bulbs!
I specified the product model number in the title, but I include it here too so that the review doesn't find its way to another product, as I have sometimes found in reviews. So, this is for the Lutron TGCL-153P-WH-2 single pole/3-way dimmers, in a white toggle style switch two-pack. I struggled with the conflicting information in so many reviews that I read which made me concerned about buying one and ending up having flicker when dimming my LED bulbs. My first attempt was a purchase I made at Costco of a different Lutron dimmer, which required a neutral wire to function, but my light switches didn't use a neutral wire so back it went. Searching the reviews long and hard led me to one comment that suggested the 153P family of switches work without flicker. So I took a chance on these. They fit right in with the same simple two-wire hook-up, plus ground, of the old switch, and use the same switch plate cover. So, I took a chance and bought them. To install it I turned off the breaker, removed the old switch, and installed the dimmer. Then I turned on the breaker, crossed my fingers, and turned on the switch. It turned on fine, so I adjusted the brightness, while hoping for flicker-free success. It worked perfectly from lowest brightness to full brightness with zero flicker at all settings! My wife is happy which means I'm happy. Therefore, I can fully recommend these dimmers. And I hope this review saves you the hassle I went through trying to find a dimmer for LED bulbs that works without flicker. Just be certain that you have LED bulbs that are dimmable. I suspect many negative reviews are because their LED bulbs were not dimmable. The other dimmer switches in the 153P family, such as the rocker style switch, should also work perfectly, since the internals are the same. Best of luck and I hope my review helps!
Scritto da: rennan
The most LED compatible dimmer on the market
Not all dimmers are created equal. The Lutron Toggler TGCL-153PH LED+ Dimmer Switch for Dimmable LED, Halogen and Incandescent Bulbs, Single-Pole or 3-Way is the most compatible dimmer on the market. I haven't found any dimmable LED bulbs that it wasn't compatible with. It also has another feature that I haven't found on any other dimmer. There is a small dial to the right of the toggle. This is used to adjust the minimum dimming of the lights. To adjust, turn on the lights, push the slider all the way down to minimum dim. Turn the dial to adjust the minimum setting for the dimness of the lights. Once the switch plate is installed, it can't be tampered with. You wouldn't want this adjusted to a point that the lights were completely off, but it should be adjusted to what your minimum preference is, just not off; that's what the toggle switch is for. Also, if you change the bulbs to a different brand, you may need to readjust the minimum dim. Different bulbs are just that, different. The other good thing about this switch is that it can be installed as either a single pole or 3-way switch. The copper colored screw should be used for the line/load wire in a 3-way installation and the 2 brass screws for the traveler wires. For single pole installation, use the copper screw for the line (power in "HOT" wire) and the brass screw on the opposite side of the switch for the load (light). These are the best dimmer switches that you will find for the money. They're an even greater buy in the 3-pack.
Scritto da: Jeff A
Works AMAZING!
We can now dim our Dimmable LED bulbs from FULL brightness to the brightness of a candle! AMAZING!
Scritto da: Niranjan Nataraja
Good quality
I bought this to control high ceiling lights and this has adjustable brightness features that I can control. Easily fits into existing receptacle. Good buy
Scritto da: Nancy F.
easy install
very easy to swap out
Scritto da: Raymond Rich
Great product
Great instructions and easy to install. Works great
Scritto da: Amazon Customer
Good Replacement for Regular Switch
A dinner table on the porch required dimming the porch overhead light. This was controlled from one switch in an indoor 3 gang (three switches in a row) box. I had one similar dimmer installed in the box already. The new dimmer replaced the middle switch; however, it would not fit in the box next to the other dimmer. The directions say to remove some tabs from the dimmer front plate so that two dimmers can fit next to each other, but this would reduce the dimmer's power handling capability. I really didn't feel like doing this to both dimmers. Instead, I installed the middle switch on the other side, and the regular switch in the middle. I was afraid of negative feedback from confused family members, but they were so happy to now have a dimmer, it didn't matter (and it turns out they didn't actually remember the old switch order, anyway). This unit has an adjustment for the dimming range. This worked well for the bulbs that I had installed. If I replace the bulbs, I expect to have to re-adjust the setting, but that is no big deal, since the LED bulbs are supposed to last for years and years. LED bulbs cannot be dimmed to the very dim levels possible with an incandescent bulb. This is not a fault of the dimmer, it is just a consequence of LED bulbs not having a, say, 1000 to 1 dimming range. This was a problem for the bathroom light because I wanted this fixture to have a very low minimum setting for middle of the night use. I solved this problem by using one low wattage incandescent bulb in the 3 bulb fixture. The fixture now has a very wide range. This was not necessary for the porch dining light, which has about a 20 to 1 range or so, which is adequate for most uses. Perhaps modern dimmable LED bulbs have improved and this is no longer necessary. There was no flickering or instability. If you have trouble with this dimmer, try changing the LED bulb for another, modern, type. I had to go through many different brands a couple of years ago when I first started dimming LED bulbs. The 2 way configuration of this switch is appreciated, although I have not used it. I like the way it fits into an existing standard switch plate, and that the dimmer control is just a tiny lever on the side, and the toggle works without affecting the dimming setting, which is just perfect.
Scritto da: Joe
1 of 3 units did not work properly
The, "Lutron Toggler LED+ Dimmer Switch, 3-way" works great for the 2 of 3 installed. 1 unit did not function as a 3-way, as if there was a missing part internally. I did not request a replacement, since I repurposed it as a typical single switch install.
Scritto da: Grahame
Well designed
So nice to have a toggle switch and separate slider for dimmer. Wiring was straight forward
Scritto da: Steve
Worked great with no adjustments required on dimming range
Works great out of the box. Needed no adjustment of dimming range for a wide range of dimmer capability on the 2 GU10 LED light fixtures that I installed. Both fixtures had 3 LED GU10/50w equivalent dimmable bulbs.
Scritto da: Salman
Great product
No issues fit in those standard builder fittings. Works perfect. I've become a switch expert.
Scritto da: Erik S
They work well with my bulbs.
I have installed 2 out of the 3 switches, one as a single pole and the other as a 3 way. They work well with my LED bulbs which are listed as compatible.
Scritto da: Framauro
Great switch from Lutron.
I have used these many times and they work very well.

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart