LNC Illuminazione Pendent in Vetro per Isola della Cucina, Moderne Lampade a Sospensione in Vetro per Sala da Pranzo, 3,3" x 3,3" x 11,2" a 1 Luce

Brand:LNC

3.6/5

€
146.23

REQUISITI DIMMERABILE E LAMPADINA: questa lampada a sospensione da cucina in vetro progettata per essere dimmerabile se utilizzata con interruttore dimmer e lampadine dimmer (nessuna delle due incluse). La lampadina richiede 1 attacco E26 Max 40W. UL LIISTED: UL Listed (luogo asciutto) per la sicurezza della tua casa. ALTEZZA REGOLABILE: La mini lampada a sospensione è dotata di aste solide regolabili da 58", può essere regolata da 14" a 72" misurando dal soffitto al fondo. I soffitti piani, inclinati, inclinati ea volta sono compatibili. DIMENSIONE MINI: Lampada: 3,3 "x 11,2". Baldacchino rotondo: 5,1 pollici di diametro. Questa illuminazione dell'isola della cucina illumina perfettamente il tuo spazio sia per l'isola della cucina, la sala da pranzo, l'atrio, l'ingresso o qualsiasi altro luogo. MISCELA PERFETTA DI FATTORIA E MODERNO: Questa lampada a sospensione in vetro per Kitchen Island presenta la classica forma di bottiglia di birra in vetro. Basta installare e illuminare questa mini lampada a sospensione che cambierà l'atmosfera di tutto il tuo spazio.

Quantity

Aggiungi al carrello Compra subito

EAN: 0764690699417

Categories: Strumenti e miglioramento della casa, Illuminazione e ventilatori a soffitto, Luci da soffitto, Luci dell'isola,

Assembled Height	‎11.2 inches
Assembled Length	‎5 inches
Assembled Width	‎5 inches
Batteries Included?	‎No
Batteries Required?	‎No
Brand	LNC
Brand	‎LNC
Color	Adjustable with Clear Bottle Shape
Color	‎Adjustable with Clear Bottle Shape
Country of Origin	China
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 116 ratings 4.6 out of 5 stars
Included Components	‎Shade included
Is Discontinued By Manufacturer	No
Is Discontinued By Manufacturer	‎No
Item model number	Pendant Lighting
Item model number	‎Pendant Lighting
Item Package Quantity	‎1
Item Weight	‎2.96 pounds
Light Direction	‎Downlight farmhouse kitchen island pendant lighting
Light fixture form	Pendant
Light fixture form	‎Pendant
Light Source Type	‎Incandescent
Manufacturer	LNC
Manufacturer	‎LNC
Material	Pendant lighting for kitchen island
Material	‎Pendant lighting for kitchen island
Number of Light Sources	‎1
Part Number	‎Pendant Lighting
Plug Format	‎A- US style
Power Source	‎Corded Electric
Product Dimensions	5 x 5 x 11.2 inches; 2.97 Pounds
Product Dimensions	‎5 x 5 x 11.2 inches
Room Type	‎Entryway, Kitchen, Dining Room
Shade Color	‎Clear
Shade Material	‎Glass kitchen island lighting
Shape	‎Cylinder
Special Feature	‎Mini pendant lighting for kitchen island, Farmhouse kitchen island Lighting, Glass Pendant Lighting, Farmhouse kitchen light, Farmhouse light fixture, Modern farmhouse pendant lighting, Glass Lighting hanging, Pendant lighting for kitchen island, Farmhouse pendent light, Modern Glass Pendant Light
Special Features	‎Mini pendant lighting for kitchen island, Farmhouse kitchen island Lighting, Glass Pendant Lighting, Farmhouse kitchen light, Farmhouse light fixture, Modern farmhouse pendant lighting, Glass Lighting hanging, Pendant lighting for kitchen island, Farmhouse pendent light, Modern Glass Pendant Light
Specific Uses	‎Indoor use only
Style	Industrial Modern Farmhouse Glass Pendant Lighting
Style	‎Industrial Modern Farmhouse Glass Pendant Lighting
Switch Installation Type	‎Ceiling Mount
Voltage	‎120 Volts
Wattage	‎40 watts

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Amy.neuman707

INCREDIBLE Customer service (beautiful pendant too)

I remodeled my kitchen 3 years ago and have loved these pendant lights. They are substantial enough to not disappear in the view but also see through and add the right amount of appeal. We got Edison bulbs to go in and they glow up nicely inside. But what I am most impressed with is the customer service. 3 years later, I am sweeping and getting a little crazy with the broom handle and yep.. I hit a pendant and broke it ...badly. I reached out to customer service and was hoping to get a part number for the pendant glass piece (vs. whole assembly) and next thing I know I have an order confirmation - they were sending me a NEW assembly. I really can't thank them enough for that type of customer service. Thanks for making my life easier and my kitchen whole again. You guys are the bomb.

Scritto da: ADB

Beautiful fixture with some minor installation glitches

Beautiful fixture. Two problems: (1) It comes with about five feet of cord for each pendant. That’s great, but the wiring inside the wood canopy (which has a metal junction box in it) is all fully assembled with wire nut joints wrapped in electrical tape. I only needed 13 3/8” of wire to put the bottom of each bottle at the desired height. I just cut off the cables, re-stripped them, and used new wire nuts, but for someone DIYing it without an endless supply of wire nuts, disassembling the taped wire nut joints would be a colossal pain in the rear. The installation instructions are woefully deficient, but there isn’t much to it. The manufacturer includes an Allen wrench to loosen and re-tighten the set screws in the collars on the canopy that secure the pendant cables. (2) The fixture, like many island fixtures, hangs from a steel plate that attaches to the ceiling jbox with two 6-32s (tip: add flat washers) and four corner anchors. At each end of the plate, there is one 2” long 6-32 pointing downward and affixed with a nut. These screws are intended to pass through two holes in the wood canopy and be secured with decorative thumb nuts. I had the fixture completely assembled and wired, only to realize that the holes in the canopy were about 1/2” too far apart. This was obviously known at the factory, because the two 6-32s were splayed slightly outward. The angle causes the screws to be too short, so they don’t go all the way through the canopy. I ultimately used 2.5” 8-32s and ordered decorative knurled bronze nuts. Completely needless waste of time. (3). LEAVE THE BOTTLES IN THEIR FOAM WRAPPERS until the fixture is installed and securely mounted. You should also leave them in their styrofoam shipping packaging when moving the fixture around and when hanging it. I placed two plastic bins (one on top of the other) and the styrofoam packaging on top, which placed the fixture much closer - and supported the weight of the five bottles - while wiring the fixture. Tip: leave a few inches of extra cable inside the canopy for each pendant. There’s plenty of room. That way you can make adjustments to the finished product as needed. The end product is absolutely beautiful, despite the relatively infuriating mounting screw debacle. NOTE: Be sure to manually straighten the pendant cables while measuring length to set the height of the bottles. Once the fixture is up, it’ll take a few days for gravity to pull the cables completely straight. You may need to make some slight height adjustments once this happens. Normal for cable pendant fixtures.

Scritto da: Jose Manuel Gonzalez

Bonito diseño y fácil de instalar

The media could not be loaded. Buena inversión. Instalación sencilla y bonita decoración. Sugiero usar bombillos tipo vintage para resaltar la madera del tope dependiendo de los gustos.

Scritto da: Mila Des

A recipe for divorce. Read this before you spend your money!

Several people have mentioned the screws being too short which unfortunately you only discover after you connect the grounding wire and rest of the circuit. This might not sound like a big deal but it was super frustrating. So here is what you should know before you purchase. 1) you need longer screws. We also went with 8-32 that were just slightly longer than what was provided. However you will also need two finishing nuts. We used acorn ones but still wasn't ideal. As beautiful as it looks the design is completely impractical for these reasons; 1) the wire ropes are ridiculously long. The lighting fixture is probably best suited for a large room with high vaulted ceilings. Yes, you can shorten them but only a bit because otherwise the excess wire will not fit in the box. 2) this thing is heavy as all heck. Why? Because the glass bottles that hang from the fixture cannot be removed, which is idiotic because it would be so much easier to install without the excess weight! Secondly, you cannot unscrew the bottle to put in the light bulbs. This is just baffling. 3) I actually do not consider this design to be safe due to the weight. The metal plate has a ring that connects to you ceiling but then you hang the weight fixture by securing the wooden box to the metal plate using very finicky screws. Two screws that don't go into the ceiling. I thought I could drill it into a joist but it is complicated due to all the excess electrical wire in the wooden box, or because the bulk of the wooden box is blocked by the metal plate. 4) lastly, just an esthetic complaint I have...I was going for a rustic barn look with Edison lamps but to in retrospect, I think the glass jars defeat this looks. They are thickwalled glass vessels and not Mason jars or what have you. All in all, I regret purchasing it. For what we paid, i would have expected the quality and installation to be better. My headline is a recipe for divorce because you will fight with your spouse during the installation. Similar to anyone who has experience installing the wall mount for a flat screen TV. I read the reviews but still bought the fixture because it had such a great rating which I think is undeserved!

Scritto da: Carla

Attractive; harder to install than stated.

Cords needed to be cut to adjust; would not fit into casing, so installation was more time consuming. Bulbs are somewhat difficult to put in because of narrow space. The style is attractive and just what I wanted.

Scritto da: LM Bussiere

Exactly what we wanted

This is exactly what we wanted for over the kitchen peninsula. We did put a dimmer on the light and used the amber glass light bulbs. We are so happy with our choice. Only thing in that there is a lot of cable that we had to wrap to get the lights at the perfect height. Not a complaint, just make sure you plan ahead for the heights you want in the individual lights. That what we did. Made it so much easier to hang.