Kingston Brass KS3195NML Rubinetto filtro acqua Magellan Design 1/4 di giro, bronzo lucidato a olio, portata del beccuccio da 4-3/4 pollici, bronzo lucidato a olio

Brand:Kingston Brass

3.7/5

100.84

DESCRIZIONE DEL PRODOTTO Per salvaguardare la tua acqua per un'esperienza di lavaggio soddisfacente; il rubinetto di filtrazione dell'acqua Magellan è semplice ma funzionale per fornire il meglio in acqua pulita. Il corpo di questo rubinetto è fabbricato in ottone massiccio per una maggiore durata e un uso duraturo. La finitura del colore è realizzata in bronzo lucidato ad olio per quella tonalità vintage scura; oltre a resistere ai graffi; corrosione e appannamento. L'impugnatura singola funge da meccanismo di controllo dell'acqua on/off a 1/4 di giro per una facile gestione del volume e della temperatura dell'acqua. Il rubinetto funziona con una valvola a disco in ceramica per una funzionalità senza gocce e dispone anche di un ingresso di compressione dell'acqua da 1/4 di pollice. DAL PRODUTTORE Per salvaguardare la tua acqua per un'esperienza di lavaggio soddisfacente; il rubinetto di filtrazione dell'acqua Magellan è semplice ma funzionale per fornire il meglio in acqua pulita. Il corpo di questo rubinetto è fabbricato in ottone massiccio per una maggiore durata e un uso duraturo. La finitura del colore è realizzata in bronzo lucidato ad olio per quella tonalità vintage scura; oltre a resistere ai graffi; corrosione e appannamento. L'impugnatura singola funge da meccanismo di controllo dell'acqua on/off a 1/4 di giro per una facile gestione del volume e della temperatura dell'acqua. Il rubinetto funziona con una valvola a disco in ceramica per una funzionalità senza goccioline e dispone anche di un ingresso di compressione dell'acqua da 1/4 di pollice. Al consumatore originale viene fornita una garanzia limitata di 10 anni.

Non adatto per sistemi ad osmosi inversa (R.O) o acqua calda istantanea. Solo uso di acqua fredda. Installazione a foro singolo. Proiezione del beccuccio da 4 3/4 pollici con un gioco del beccuccio da 8-3/4 pollici. Elegante leva in stile Magellano. Sistema di cartucce ceramiche antigoccia. Riempitore di vetro in stile tradizionale.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Kingston Brass
Brand ‎Kingston Brass
Color Oil Rubbed Bronze
Color ‎Oil Rubbed Bronze
Country of Origin ‎Taiwan
Customer Reviews 4.6 4.6 out of 5 stars 331 ratings 4.6 out of 5 stars
Finish ‎Oil Rubbed
Finish Type Oil Rubbed
Finish Type ‎Oil Rubbed
Handle Location ‎single-hole-deck-mount
Handle Material ‎Brass
Handle Type Lever
Handle Type ‎Lever
Head Style ‎Standard
Included Components Faucet; Mounting Hardware
Included Components ‎Faucet; Mounting Hardware
Installation Method Single Hole
Installation Method ‎Single Hole
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH ‎10.81 x 4.63 x 1.75 inches
Item model number ‎KS3195NML
Item Package Quantity ‎1
Item Weight ‎1.1 Pounds
Manufacturer ‎Kingston Brass
Material Brass
Material ‎Brass
Maximum Flow Rate ‎2 Gallons Per Minute
Model Name ‎Kingston Brass Magellan
Mounting Type Deck Mount
Mounting Type ‎Deck Mount
Number of Handles 1
Number of Handles ‎1
Number Of Holes 1
Number Of Holes ‎1
Part Number ‎KS3195NML
Product Dimensions ‎10.81 x 4.63 x 1.75 inches
Size ‎4-3/4 inch Spout Reach
Spout Height ‎10.81 Inches
Spout Reach ‎4.63 Inches

3.7

10 Review
5 Star
81
4 Star
8
3 Star
6
2 Star
4
1 Star
1

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: BuysAlot
Need to buy a "fender warsher" if your sink has a precut hole 1-1/2" or larger
FYI: the mounting washer (goes underneath) in the kit is a 1-1/2" OD. This is the same size hole predrilled on my sink so I had to buy a washer with a larger OD. I found a "fender washer" on Amazon with a 1-3/4" OD that worked. The other problem I had was the 1/4" tubing connection to the faucet and most under sink connectors are 1/2" NPT or 3/8" NPT. I used some 1/4" TFE tubing I had and ran it from the faucet to the water filter I bought, using a 1/4" tubing to 1/2" NPT plastic adapter. So, before you buy this faucet, check the size of the connections you have and either get the appropriate adapters or find one that fits your connections.
Scritto da: KH
Great looking faucet
I purchased this faucet for use with my reverse osmosis system. Unfortunately, I didn't read closely enough since it does state that this faucet is not for reverse osmosis systems. After it was installed, I noticed the very last sentence on the instruction sheet stated that it was not for reverse osmosis systems. If I would have read the description better before buying this faucet I would have seen that the seller specifically stated that; therefore, it was my fault. After doing some research on the internet, I found that air gap faucets (which this one is not) are recommended for reverse osmosis units and it is required in some areas under plumbing codes. The air gap faucet is to prevent water from a stopped up sink drain from being siphoned or forced back into the reverse osmosis system. Based on what I have read, an air gap faucet is not absolutely necessary so hopefully this faucet will continue to work with my system. I am not a plumber so I am only going by what I have been able to find on the internet regarding reverse osmosis faucets vs filtered water faucets. I do know that my previous faucet which came with the reverse osmosis system was not an air gap faucet and it worked fine. We got new quartz counter tops and an under counter sink so we needed to replace all our faucets. I love the look and the material and so far it is working fine with my system.
Scritto da: Ahmed Bashandy
Good but not sturdy enough because does not include bottom metal washer
The faucet is quite good. However its main problem is that there is washer that goes under the cabinet to hold the faucet upright is plastic. Plastic is not sturdy enough to hold the faucet upright. The other problem is that the bottom nut that holds the bottom washer is too small. It barely covers the 1/2 inch hole of the washer. I had to buy a metal 1/2 by 1 1/2 washer to make the faucet more sturdy
Scritto da: Florida Guy
Im glad we got it
We have had this Filter Faucet a few months now and it looks good and works well (no leaks). I wish the spout was a little more heavy duty. Its on the sink and its not in harms way at all but the spout does seem a little light. If it were to take a direct hit from a small pan or just hit hard enough I'm sure it would bend. I'm not sure what the material of the spout is but the rest of it is of more hearty construction. But we do like it and its been great so far.
Scritto da: Joe
Pleased
Seems like a quality faucet. I have 4 hole Koeler sink. I installed a faucet that used three holes-it has one hole for the handle assembly, one for the spout, and one for the sprayer. So I installed this faucet in the remaining hole. I chose to run an unsoftened water line to the icemaker in the fridge and to this faucet. Be aware that this uses a 1/4" waterline, like what comes from a water filter. So it took some fittings and some doing to go from a 3/8 (or a 1/2" for that matter) copper water line to both the 1/4" flexible line for the icemaker and this faucet, which I also used a 1/4" flexible stainless line. My installation is 3/8 soft copper to a reducing fitting to 1/4" soft copper, to a 1/4" T, and a flexible icemaker hose to this faucet and a flexible icemaker hose to the fridge. Not a problem, just understand it doesn't use the standard size waterline like most faucets. It dispenses a nice "solid" stream of water. It has a nice nickel finish that matches my faucet. A definite improvement over the cheap chrome faucet I had that wore out after a couple short years.
Scritto da: AJ Tissier
Great Faucet
+++++ 6 year update! +++++ This faucet served our family well at it's original location for nearly 6 years without any issues. We recently sold that home and purchased different home. With our new home we needed an oil rubbed bronze filtered water dispenser and knew just what faucet to get! We expect this faucet to server us for many trouble free years! ===== Original review ===== Feels as solid or better than the faucet it is replacing. Oil-rubbed bronze finish looks good. I have a Kohler faucet and Kwikset door knobs near by and it matches close enough to not be noticeable (much more so than polished nickel faucet it replaced). No issues so far, quick easy swap with the old faucet, no drips, and a smooth action on the knob. Will update the review if any issues do develop. Also, I ordered a Used item from Amazon's returns, and the item was in perfect condition with no issues, for less than half the retail price of the faucet, so don't let a "used" item deter you from saving a good amount of money.
Scritto da: Amazon Customer ALD
Used for a undersink drinking water filter
Ordered a Culligan EZ under sink filter and this matches the finish "Oil Rubbed Bronze" on the kitchen faucet. The install was eazy and it looks built well. My only complaint so far is the mounting washer they give you is an offset hole design so to get it to hold in the hole of the rim of the sink you have to position it very carefully, it would not cover the whole hole. If I were to do it again I would use a much larger common washer behind the one they give you so you could tighten it up firmer 1 1/2 inch or so. Other then that its a nice faucet and they Wife likes it, So I am a happy boy!
Scritto da: Ren
Not the right colour
Returned this and got a refund. Not the right colour.
Scritto da: Abe Bueckert
Very good
Very good
Scritto da: PileOBones
Works well and is a nice colour. `
This was a perfect colour match to the water tap. delivery was quick.

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart