Jonard Tools JIC-375 Spelafili in fibra ottica a tre fori con impugnatura in TPR, lunghezza 6 pollici

Brand:JONARD TOOLS

3.8/5

60.45

DURATA A LUNGO TERMINE: Lo strumento è realizzato in robusto acciaio ad alto tenore di carbonio e il manico è realizzato in TPR (gomma termoplastica) per una maggiore durata e un maggiore comfort. CONSERVAZIONE CONVENIENTE: il blocco di sicurezza consente di riporre facilmente lo strumento quando non viene utilizzato. ALTA PRECISIONE: lo strumento può rimuovere la guaina esterna in fibra dal rivestimento tampone interno e dal rivestimento da 250 micron fino alla fibra di vetro senza intaccature o graffi. UTILIZZO VERSATILE: lo stripper in fibra ottica a tre fori esegue tutte le comuni funzioni di stripping della fibra.

DURATA A LUNGO TERMINE: Lo strumento è realizzato in robusto acciaio ad alto tenore di carbonio e il manico è realizzato in TPR (gomma termoplastica) per una maggiore durata e un maggiore comfort. CONSERVAZIONE CONVENIENTE: il blocco di sicurezza consente di riporre facilmente lo strumento quando non viene utilizzato. ALTA PRECISIONE: lo strumento può rimuovere la guaina esterna in fibra dal rivestimento tampone interno e dal rivestimento da 250 micron fino alla fibra di vetro senza intaccature o graffi. UTILIZZO VERSATILE: lo stripper in fibra ottica a tre fori esegue tutte le comuni funzioni di stripping della fibra.
Brand JONARD TOOLS
Grip Type Ergonomic
Handle Material Thermoplastic Elastomer
Handle Material Thermoplastic Elastomer (TPE)
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 0.2 x 3.84 x 1.38 inches
Item model number JIC-375
Item Weight 0.13 Kilograms
Manufacturer Jonard Industries
National Stock Number 5110-01-584-9314
Product Dimensions 0.2 x 3.84 x 1.38 inches; 4.59 Ounces

3.8

13 Review
5 Star
86
4 Star
9
3 Star
3
2 Star
1
1 Star
2

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Jennifer R.
By far ideal to use
Work as said actually my first pair but was easy cleaning clad before cleaving
Scritto da: Laurence
It’s an approved tool for ISP’s and TV providers and I highly recommend it
The 4in1 stripper that was included in my fusion splice kit was defective or just no good and it kept cutting the fiber, and the middle hole was too big and wouldn’t strip. My manager assume maybe I was doing something wrong. If that is the case, then I guess it is safe to assume that this Jonard, JIC 375 is idiot proof because it strips the fiber clean without any effort or damaged and I love it.
Scritto da: Allan Soopal
it works great.
it works great.
Scritto da: Wayne
Excellent fiber strippers
Works great every time
Scritto da: Stephen Klenert
Go-to fiber optic strippers for beginner and expert fiber optic technicians
high quality , built for life fiber optic strippers. Jonard Tools JIC-375 Three Hole Fiber Optic Stripper is the only tool you can rely on for quality stripping of fiber optic cable.
Scritto da: Kevin H. Patterson
Very nice for the price.
These strippers have worked perfectly for me on both single and multimode fiber. I didn't have to adjust my pair at all, unlike some of the other reviews. (The only minor problem I had has been stripping off the cladding of some bare fiber in very cold outdoor conditions (near freezing), breaking the fiber while trying to strip. However, I think this is more due to the fiber being more brittle in the cold; when I warmed it up it worked fine without breaking. The only other thing I can think of is maybe the metal of the tool contracts enough from the cold to make the stripping too tight. In any case, work in a room-temperature environment or warm things up and you should be fine.) I have had the best success holding the tool at about 45 degrees relative to the fiber, instead of directly perpendicular to it. Would definitely recommend this tool and buy it again if needed. Seems to be very good quality for the price, not the usual Chinese "junk" that seems to flood the market...
Scritto da: Vincent Price - NOT
High Quality and Reliable fiber optic stripper for home use
I bought this to run fiber optics cable throughout my house. This tool turned out to be a heck of a lot more reliable than the similar-looking but only two-hole stripper that came with the cheap "fiber optics installation kit" I purchased from Amazon's marketplace. I was able to reliably strip fiber optical cables to install dozens of fiber optic terminations. The three holes/notches aligned perfectly to the size of my cable to allow clean stripping of the outer sheathing, inner sheathing, and acrylic coating on the core fiber. In contrast, I was only able to get about 30 or 40% reliability stripping with the two-hole stripper that came with my cheap installation kit. This tool definitely saved me a lot of frustration and has been worth the purchase.
Scritto da: Alicia Byrn
It works great for fiber
The yellow sleeves on the handles slip off but the tool works great
Scritto da: Edi Solic
Perfect
Does the job neatly
Scritto da: Hike and bike.
Fibre strippers, stick to millers
2nd hole stripper cuts right through the 250um coating and snaps the fibre. I was unable to adjust the grub screw.
Scritto da: steve hollinshead
Good buy
Great bit of kit
Scritto da: Radish
Good Stripper
I got one of these as part of a work provided pack for my fibre optic training. The one i got was heavily used and was really difficult to strip with. It still worked but it was pretty clear it needed adjustment. When I purchased my own tools for the job i decided to go with the same brand and purchased this one. Right out of the package it worked flawlessly without snapping the lines I was working on or getting stuck on the jacket the way the old one did. So far super happy with this buy.
Scritto da: Carlos
Muy bueno!
En fibra óptica de Orange y Red Abierta es perfecto! En la de Movistar aun no la he probado. Esta última es mas dificil de pelar, pero creo que sin problema.

Prodotti correlati

hot
OTC 4468 Spelafili autoregolante da 9".
3.4/5

€ 58.62

OTC 4468 Spelafili autoregolante da 9".
3.4/5

€ 58.62

hot
Bon Tool 24-207 Tagliatappeti
2.6/5

€ 98.53

Bon Tool 24-207 Tagliatappeti
2.6/5

€ 98.53

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart