HitLights Trasformatore driver LED dimmerabile da 25 W, alimentazione da 120 V CA a 12 V CC, compatibile con dimmer Lutron Leviton, per strisce luminose a LED, progetti LED a tensione costante, ETL 12 V 25 W

Brand:HitLights

3.6/5

67.14

lNPUT: 100-120 V CA, 0,9 A max. 50/60 Hz, USCITA: 12 V CC, 2,1 A max, 25 W max. QUALITÀ HITLIGHTS, ELENCATA ETL e supportata da due anni da HitLights per la massima tranquillità; Contatta il nostro team di assistenza clienti con sede negli Stati Uniti in qualsiasi momento per la risoluzione dei problemi e la sostituzione senza problemi o per qualsiasi domanda sull'acquisto o l'installazione. SCEGLI UN LIVELLO DI LUCE APPROPRIATO per qualsiasi stanza, qualsiasi stato d'animo o qualsiasi momento della giornata. CONNESSIONI TERMINALI A VITE per una facile installazione secondo il codice elettrico; Vedere lo schema nelle immagini per le istruzioni di cablaggio. DIMMERAZIONE FLUIDA E AFFIDABILE da 0 a 100% senza sfarfallio. CONVERTE 120 V CA in 12 V CC e funziona con interruttori dimmer compatibili con LED di Lutron, Leviton e altri. Classificazione IP20, ideale per uso interno.

lNPUT: 100-120 V CA, 0,9 A max. 50/60 Hz, USCITA: 12 V CC, 2,1 A max, 25 W max. QUALITÀ HITLIGHTS, ELENCATA ETL e supportata da due anni da HitLights per la massima tranquillità; Contatta il nostro team di assistenza clienti con sede negli Stati Uniti in qualsiasi momento per la risoluzione dei problemi e la sostituzione senza problemi o per qualsiasi domanda sull'acquisto o l'installazione. SCEGLI UN LIVELLO DI LUCE APPROPRIATO per qualsiasi stanza, qualsiasi stato d'animo o qualsiasi momento della giornata. CONNESSIONI TERMINALI A VITE per una facile installazione secondo il codice elettrico; Vedere lo schema nelle immagini per le istruzioni di cablaggio. DIMMERAZIONE FLUIDA E AFFIDABILE da 0 a 100% senza sfarfallio. CONVERTE 120 V CA in 12 V CC e funziona con interruttori dimmer compatibili con LED di Lutron, Leviton e altri. Classificazione IP20, ideale per uso interno.
Brand HitLights
Country of Origin China
Current Rating 2 Amps
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 6.06 x 2.13 x 0.75 inches
Item model number PWR-12V-024-30-D
Manufacturer HitLights
Mounting Type Wall Mount
Power Source AC
Product Dimensions 6.06 x 2.13 x 0.75 inches; 10.55 Ounces

3.6

8 Review
5 Star
75
4 Star
14
3 Star
4
2 Star
2
1 Star
4

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Bill
Great Compact Supply
I purchased this supply for LED light strips under the cabinets for a basement bar. The project is ready for me to install it yet, but I did connect to the longer LED strip than will be installed to test it with a Lutron dimmer. It worked perfectly and didn't get hot with my load that was ~20W. The reason I picked this specific power supply is because of it shape and size. In this application, the only place to locate this power supply is inside the top most section of the cabinets. This one is short enough to fit front-to-back in the cabinet and small enough to be essentially hidden by the cabinet front face frame!
Scritto da: KK
Nice led driver. The 60W Triac fades in for the led light.
I bought two. One is the 25W and one is the triac 60W. They both fits into a standard 4 gang electrical box. You can buy a cover to hide them. The nice thing about the Triac is the led light fade in when switch on which I think it looks cool. They run warm but not hot enough to burn your hand.
Scritto da: LC
Needed for LED lighting.
Works great. Connection was easy.
Scritto da: Sam Perry
Works with Lutron Caseta switch!
Electrician installed a cheap LED driver that with my Caseta switch caused my undercabinet LEDs to blink on and off when switched off. Tried a couple other drivers. This one worked! Thus, it is compatible with Caseta (although not on the Lutron list). To be clear though, I have only installed this with a Caseta on/off switch, not a dimmer (I have enough dimmers and find that there is no need to dim anyway). I assume it will work fine with a dimmer because this is a dimmable driver. I like the cover for the LED wire lead connection. Connection is also nice with screw-down terminal (I prefer this). Nice and clean installation.
Scritto da: SKI
So far so good
Used this transformer for some LED Hitlights strips. Work great so far and no noise.
Scritto da: Amazon Customer
Be careful
I’ve read reviews that the dimensions in the description were wrong. Well, they may have been corrected because they are correct. However, there is a photo included depicting the dimensions that is not correct. Metric is right but inches are wrong. It’s just over 6 inches long not 3.
Scritto da: 425guy
Works as expected, mounting options could be more robust
Functionality of product is great. Have it paired with high output Hitlights led strip lights for under cabinet kitchen lighting. Device is mounted under cabinet and at max power does get a little warm but not so hot it warms the lower shelf inside the cabinet the way the halogen bulb fixture would. There is no humming and the LEDs dim great with a Lutron Maestro CL dimmer - no flicker what so ever at any setting and can be dimmed to point there is almost no light. Only negative is there are only two mounting notches that don’t allow for a very large fastener and the plastic around them is not very robust. Didn’t cause me issues but did make me be more aware during the install for fear of snapping one of the mounting tabs.
Scritto da: Toslink
Low-profile Dimmable LED Driver w/ Excellent Dimming Behavior
I used two of these drivers in a kitchen accent lighting project. They are mated with Lutron Radio Ra2 lamp dimmers, powering 12v linear lighting. One is used to drive lighting above the cabinets, while the other is used to drive the lighting mounted below the island countertop. Lutron's dimmer is a forward-phase model, intended to dim magnetic low-voltage drivers. Fortunately, this driver, even thought it's of the ELV variety, it's designed to also work with "standard" forward-phase dimmers. The dimming is very linear, with no flicker at any dimming level. One driver is loaded to around 40 watts, while the other is very lightly loaded at 7 watts. Regardless, both drivers operate flawlessly and don't behave in a load-dependent way, which is how some drivers can behave. The low-profile case allows the driver to be mounted in areas with little height. In my situation, I've mounted it to the countertop. The driver is shorter than the 3/4" wood used in the cabinet. This allowed it to be placed above the drawer and it won't interfere with the drawer's movement. A+

Prodotti correlati

hot
Trasformatore
0.1/5

€ 242.56

Trasformatore
0.1/5

€ 242.56

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart