Hillman 41298 pan Combo ancoraggio a muro cavo

Brand:Hillman

2.4/5

28.92

DESCRIZIONE DEL PRODOTTO Gli ancoraggi a muro cavi, noti anche come bulloni Molly, vengono utilizzati con il muro a secco. Utilizzare per fissare in modo sicuro specchi, immagini, armadi e altro a pareti vuote. Questo ancoraggio è un manicotto espandibile che scorre nel foro preforato nel muro. Una volta installato l'ancoraggio, la vite può essere rimossa e gli elementi possono essere cambiati senza interrompere l'ancoraggio. Utilizzare per applicazioni di media intensità. DAL PRODUTTORE Utilizzato principalmente nel muro a secco, l'ancoraggio a muro cavo è un dispositivo di fissaggio per impieghi medi. Una volta installato il corpo dell'ancora, la vite può essere rimossa e gli elementi possono essere cambiati senza interrompere l'ancora. La punta ha un punto di azionamento per perforare facilmente il muro a secco.

La finitura in zinco offre una moderata resistenza alla corrosione. L'estremità smussata richiede un foro pilota. Utilizzare in cartongesso e pannelli. Utilizzare per da 1/8 a 1/4 pollici. Spessore del muro.
Active Ingredients Zinc
Assembled Diameter ‎0.25 Inches
Batteries Included? ‎No
Batteries Required? ‎No
Brand Hillman
Country of Origin ‎China
Customer Reviews 3.4 3.4 out of 5 stars 30 ratings 3.4 out of 5 stars
Cutting Diameter ‎0.25 Inches
Domestic Shipping Item can be shipped within U.S.
Included Components ‎Anchors
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎41298
Item Package Quantity ‎1
Item Weight ‎2.46 ounces
Manufacturer ‎The Hillman Group
Material ‎Steel
Measurement System ‎Inch
Mounting Type ‎Wall
Number of Items 20
Part Number ‎41298
Product Dimensions ‎4.81 x 2.69 x 1.25 inches
Unit Count 1.00 Count
Usage ‎Concrete
Use for Whole Body

2.4

8 Review
5 Star
43
4 Star
7
3 Star
9
2 Star
26
1 Star
14

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: PhotoGuy
Breaks Easy
Bought these to hang shelves on a hollow core door. Anchors of this size are getting harder to find at local stores. They are the correct length but the metal tabs that bite into the surface to hold it while tightening, bend very easily causing them to spin. The only way I was able to install these was to hold the head with some needlenose locking pliers. They are name brand, they quality has just gone down.
Scritto da: Larrykh465
Go with a different brand
the screw strips in the anchor way to easily. Even with a hand driver it took a couple of tries not to over torque them.
Scritto da: Bob Behrent
They Worked Perfectly
They work perfectly IF you can keep them from turning as you screw then in the the correct tightness. The simple tip is: Lightly tap them into the material you are inserting them into so that the two small points on the inside of the exterior rim are grabbing into the wall or door's face that you are mounting them in. Then, the two points will keep it from turning while the screw pulls the rear tightly against the inside of whatever it is inserted into. Suggested: Don't use a power screwdriver to prevent overtightening. I mounted a heavy full-body mirror on the inside of a door using eight anchors. Two each top, bottom, and both sides. It will last a very long time.
Scritto da: M. Downes
Would buy again if needed
I live in a mobile home where the walls are thin and weak, making it risky to hang anything unless a stud is handy to drill into...In most cases they're not. I wanted to install aMounted Mail Organizer and Key Holder by the door and aOrganize It All Satin Nickel Glass Shelf with Towel Bar (16905) in our 2nd bathroom so I bought these hollow wall anchors. They're perfect, very easy to install and provide a good strong hold. The one thing I learned which others may already know is that you really have to turn the screw well past the point where you think it's in to get the anchor to open properly behind the wall, otherwise it won't hold!
Scritto da: Frank V
Great for mounting
They don't have the grip range for half inch sheetrock but they work great to mount hooks on hollow core doors.
Scritto da: Barry Brinson
very lightweight - low quality
spike that hold it still in wall not heavy enough to hold it still when tightening screw to clamp in place. They bent over. Be extremely careful when tightening screw - very very easy to strip it out. Must be done very carefully by hand only. Stop when just snug.
Scritto da: James Welty
Not recommended
Was made of cheap material. Tightened screw and before exterior arms drew in and expanded screw stripped out. Leaving a particularly tighted anchor
Scritto da: Kirstie
Fantastic product, A+!
Two of these anchors, and my pots and pans are hanging pretty on the wall! Short enough to fit, and strong for 5 pots/pans. Wonderful product!

Prodotti correlati

hot
Sharkie 376353 Value Kit, bianco
3.5/5

€ 42.73

Sharkie 376353 Value Kit, bianco
3.5/5

€ 42.73

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart