0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

GSI Outdoor Glass PercView Top , 1,4 pollici

Brand:GSI Outdoors

2.7/5

€
24.80

La parte superiore in vetro PercView è una parte superiore universale per caffettiera sostitutiva solo per caffettiere GSI Outdoors in acciaio inossidabile e smaltate di forma conica. Ruotalo saldamente nella parte superiore del tuo percolatore conico preferito e affidati a esso per molti altri anni di fedele servizio mattutino. La manopola di vetro non si adatta alle perle cilindriche GSI OUTDOORS.

Quantity
Aggiungi al carrelloCompra subito

EAN: 0090497650017

Categories: Casa e cucina, Cucina e sala da pranzo, Parti e accessori per piccoli elettrodomestici, Parti e accessori per macchine da caffè ed espresso, Parti di ricambio per macchine da caffè espresso,

Lavabile in lavastoviglie. Fatto di vetro. PercView Top consente di visualizzare l'intensità del caffè. Realizzato per attorcigliarsi saldamente nella parte superiore del percolatore. Adatto a tutti i percolatori di forma conica GSI Outdoors.
Brand GSI Outdoors
Brand ‎GSI Outdoors
Brand Name ‎GSI Outdoors
Capacity 2 Ounces
Capacity ‎2 Ounces
Coffee Maker Type Percolator
Coffee Maker Type ‎Percolator
Color Clear
Color ‎Clear
Customer Reviews 3.6 3.6 out of 5 stars 472 ratings 3.6 out of 5 stars
Included Components ‎Glass Percolator Top
Item Dimensions LxWxH ‎3 x 3 x 1.4 inches
Item Package Dimensions L x W x H ‎2.52 x 1.89 x 0.87 inches
Manufacturer ‎GSI Outdoors
Material ‎Glass
Model Name ‎Glass PercView Top
Number of Items ‎1
Package Weight ‎0.02 Kilograms
Part Number ‎65001
Size ‎1.4 inch
Special Feature Dishwasher safe
Special Feature ‎Dishwasher safe
Suggested Users ‎Unisex-adult
Warranty Description ‎All GSI Outdoors products are fully warrantied to the original owner against manufacturer's defects in materials and workmanship.

2.7

12 Review
5 Star
53
4 Star
10
3 Star
8
2 Star
7
1 Star
23

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: TWpw
Looks better, fit is a little off though.
I like this glass top vs. the resin one because the resin will melt if campfire flames get to it, the reason I'm having to replace with this one. As for the fit, no it didn't fit right off, assumed it would either be too loose or too tight, and it was too tight. My percolator lid is on a stainless Cabela's (14-cup?) made by GSI (Glacier Stainless). Tinkered with the opening on the lid because it looked a little too small so the first time I bent the lid opening slightly but that didn't work. Resorted to taking a grinder and very lightly grinding some of the thread off of the metal lid, NOT THE GLASS TOP, then carefully tried screwing the top in. At first it was tight then I forced it very lightly, not too much pressure, and it screwed right in rather easily and tightened down onto the lid. Looks great!
Scritto da: Old Fart 161
Shattered on Second Pot of Coffee
Item Shattered on second use. Unlike the top that came with my GSI 12 cup Peculator this top fits way too snugly. The original resin top had enough play so that it would be just perfect barely tight/ almost loose. The expansion during heating the pot would seal it tightly without breakage. Sadly, it got melted and I needed a replacement. I am willing to try the replacement again and see if it's consistent with the last top. I will update if the second one works or shatters again. UPDATE. I give this product 3 stars now. The second top fit perfectly and is loose enough to survive daily use. I like that it's clear and wont stain over time like the resin top did. The glass tops seem inconsistent in production. Now only time and care will tell how long it will last. I think for over all durability the resin top would be better as long as you don't melt the darn thing like I did.
Scritto da: Greatwill
Be sure glass is warm before you start percolating, do not cool it down too quickly it will crack.
Yes glassview doesn't fit you have to take some steps to make it fit. It's pretty simple. But once you do this you still can't tighten it down while the coffee is percolating or cooling down. I first performed a tempering process. I place the glass top on a silicone pad that I had placed on a sheet pan. Placing the pan in a cool oven along with the glass top. Letting the oven heat up to 450 degrees. I did this while baking chicken about 45 minutes as to not waste the energy during this process. The most important process is the glass top stays in the oven until it is completely cool cannot be removed very important. I repeated this three times yes it seems like a lot of work this will help relieve some of the tensions inside the glass. This is a primitive process for tempering glass. It still doesn't mean it won't break. But once you do this you still can't tighten it down while the coffee is percolating. I'll give you instructions on how to do that. But once you do this you still can't tighten it down while the coffee is percolating.did not design this for this pot. This is only for cone (conical) shaped outdoor version (/ \). Here's the simple version pick some sandpaper and sand out the whole to make it larger. If the holes not big enough on the coffee pot expands at a different rate than the glass top it will crack. But more so than not it will crack during the cooling process if it's too tight.please keep in mind that no matter what you do it may still crack. This could happen on the first use or a use 10 years from now. So you need to make the whole a little larger than necessary so there's wiggle room. I use the rotary tool method with sandpaper attachment and a fine grinder attachment to smooth it out. Making a hole about 1/16 of an inch larger than it needed to be. This was the first time I use a rotary tool ever I was very careful so not to damage the coffee pot or injure myself. Always read the instruction booklet. Keep in mind while it's percolating it might tighten itself up. When you pull this percolator off the burner make sure it's loose. Leave it on the stove until it's completely cool do not put it in water do not take it off the stove. Most of all don't drop it. If this is cold before it starts percolating it will crack Another good train of thought never put a percolator in a sink and leave it there with other dishes pots and pans it will surely Bend or break some part of it. Always wash it after it has cooled down set aside to drain and air dry.
Scritto da: Tammy
Broke into 2 pieces after 10 uses - called 800 number - sending a new one.
UPDATE: Called 800 number and sending a new one free of charge.......Was very pleased with the price but i got what i paid for. It was the least expensive top that i could by and now i am stuck with a coffee pot that i cannot use. I cut my thumb when it broke in half taking it out to clean. Ended up using pliers to remove. I guess that i should have done that in the first place.
Scritto da: Daniel Bustos
Doesn't fit, but later it does FIT!
I had a Bass Pro outdoor coffee pot, it has cheap plastic cap, but the stainless was way best one. When this plastic cap wear off and stains on it, I had to look for a new cap and I think glass cap would be better, when I order it and the first one come into broke pieces, they send other one, and I try it on, it doesn't fit, it is like really fraction, I just give up and have not think of other things for a while, but then, I got idea, maybe I can use a file or a grind to rub some of it off, but I find better way, I just have to find a 3/4 pcv and buy 400 and 800 grit steel sandpaper, then wrap it round on pcv.. Then I work through on it run all around and finished all, make sure no sharp edge, then try to fit it again and it FIT! I am glad it fit! After while use it, I was worrying about developing rust on rim, but no rust... You can do it, if it does not fit your coffee pot and it look like very fraction fit, just rub it off with 3/4 pcv and sandpaper... You will be happy...
Scritto da: 9dawgs
Poor Quality Control
I’ve been using my GSI stainless steel coffee pot for years. This past camping trip the glass percolator top broke. I purchased this product as a direct replacement. When I received the new one, the bottom was cut crooked (not flat) with protrusions around the bottom edge and it wouldn’t fit in the hole! I spent about an hour sanding it down with 150 then 600 grit sandpaper by hand. I finally with effort was able to screw it into the pot lid. It was only $6 or I would’ve returned it and tried again. GSI needs to improve their quality control…
Scritto da: Diane
Perfect
My mother had a tea kettle that she needed a replacement for in this worked perfect!
Scritto da: Kindle Customer
WIll not fit GSI Glacier 12 cup perc
Absolutely will not fit the GSI Glacier Stainless Steel camping 12 cup percolator I purchased in August 2020. Neck of the glass is a larger diameter than the hole + the thread is different to that of the acrylic perc top that came with the percolator. Pointless to try to force a fit otherwise you'll end up with a bent perc and broken glass. Don't even try it. Very disappointed, given that this item as it is supposed to be a universal top made by the same company that made my percolator! Suspect this is why they don't fit glass as standard on these Percs.
Scritto da: diesel
Glass percview top is a bit difficult to screw down but works
Glass percview top is a bit difficult to screw down into the steel lid. Once you get it in there, it won’t let you screw it all the way and it stops midway or less. As the picture is shown, the glass top is tilted. Also to consider is the fact that after you have the glass top screwed down, the weight causes the entire percolator to fall back when the lid is open all the way for the 3 cup percolator. Therefore, you will have to hold it up, otherwise it will fall (especially if you don’t have the filtration system inside the percolator and no water) It’s not too bothersome if the lid is completely down. Glass top is still better than plastic so I recommend getting this.
Scritto da: Miguel(On)
No lo compraria de nuevo
A pesar de que me lo voy a quedar, muy a duras penas he conseguido que entrase en el agujero y a costa de cargarme un poco el esmalte de la cafetera. El que viene de serie no ajusta del todo y tuve que ponerle una junta de goma, con lo cual parece que va algo mejor. Este es de cristal, mejor que el que trae (que no se por que, no los ponen todos de cristal aunque hubiera una pequeña diferencia de precio) Mi cafetera es GSI Outdoors pero este articulo, para nada ajusta como es debido, suave y sin percances. Luego con el miedo de que se rompa al forzarlo al ser de cristal. Lo dicho, me lo quedare porque no son faciles de encontrar y guardare el de origen por si tuviera algun percance; pero lo dicho, si lo se, no lo compro.
Scritto da: Grasnarbe
Glasdeckel, nicht Plastik!
Dieser Deckel für Outdoor-Percolatoren ist aus Glas gefertigt, so wie es sein soll. Dank der Angabe des Lochdurchmessers, passt er auch perfekt für den Percolator eines anderen Herstellers! Das Loch für den Stopfen muß 29mm haben und aus relativ dünnem Edelstahl bestehen, dann kann man mit etwas Geduld den Anfang des Gewindes finden und das Ding passt bombenfest und perfekt!
Scritto da: Amazon Customer
Fit perfect
Fit our Coleman 12 cup percolater perfectly. No complaints. Would order again but hoping i do not need to.

Prodotti correlati

hot
Cuisinox Roma, Milano, Bella & Liberta Caffettiera Espresso Acciaio Inossidabile Riduttore di Ricambio in Acciaio Inossidabile, Dimensioni 6 Tazze (61mm)
2.9/5

€ 26.13

Cuisinox Roma, Milano, Bella & Liberta Caffettiera Espresso Acciaio Inossidabile Riduttore di Ricambio in Acciaio Inossidabile, Dimensioni 6 Tazze (61mm)
2.9/5

€ 26.13

hot
Kit Bunn 39257.0000, gruppo sonda, Ultra-2 Laf
4.1/5

€ 199.43

Kit Bunn 39257.0000, gruppo sonda, Ultra-2 Laf
4.1/5

€ 199.43

hot
Wilbur Curtis Acciaio inossidabile standard con cestello in filo metallico - Cestello per birra in filo metallico di livello commerciale - WC-3316 (ciascuno) 1- (confezione)
3.3/5

€ 116.07

Wilbur Curtis Acciaio inossidabile standard con cestello in filo metallico - Cestello per birra in filo metallico di livello commerciale - WC-3316 (ciascuno) 1- (confezione)
3.3/5

€ 116.07

hot
Elettrovalvola Bunn 40281.1000
4.1/5

€ 72.53

Elettrovalvola Bunn 40281.1000
4.1/5

€ 72.53

hot
Fetco 1063.00001.00 Cavo di Alimentazione, Iec-320-19, 20A/125V
0.1/5

€ 64.58

Fetco 1063.00001.00 Cavo di Alimentazione, Iec-320-19, 20A/125V
0.1/5

€ 64.58

hot
Fondo 21261.0000 Gruppo Tramoggia Gourmet G3
0/5

€ 172.33

Fondo 21261.0000 Gruppo Tramoggia Gourmet G3
0/5

€ 172.33

hot
Kit Bunn 40670.1021, gruppo testa di spruzzo, 21 fori con onda Titan
4.1/5

€ 69.72

Kit Bunn 40670.1021, gruppo testa di spruzzo, 21 fori con onda Titan
4.1/5

€ 69.72

hot
Bunn 07065.1000 Kit riscaldatore serbatoio, 3325W 240V
0.1/5

€ 148.16

Bunn 07065.1000 Kit riscaldatore serbatoio, 3325W 240V
0.1/5

€ 148.16

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu