0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

General Tools Contour Gauge 837 - 6" Angle Finder Tool per il miglioramento della casa - Gadget per uomo in acciaio inossidabile

Brand:General Tools

3.2/5

€
30.79

STRUMENTI GENERALI: Da molti anni siamo leader riconosciuti nell'innovazione, nella progettazione e nello sviluppo di strumenti fai-da-te specializzati. Incoraggiamo gli artigiani, gli artigiani e i fai-da-te a lavorare in modo più intelligente, misurare meglio e aumentare la produttività. CORNER TRIM: ideale per misurare modanature per la riproduzione, duplicare mandrini sul tornio, copiare curve e vari altri lavori di adattamento dei contorni. Basta premere i denti dello strumento su un contorno e tracciare. PERNI ULTRA SOTTILI: Il nostro rilevatore di spigoli a 6 è dotato di perni in acciaio inossidabile resistenti alla ruggine per prestazioni di lunga durata e una maggiore precisione rispetto ai denti in plastica. Questo strumento modello ha anche segni di righello sul corpo con incrementi di 1. PROFILO PERFETTO: Con 35 fogli per pollice, il nostro duplicatore di contorni registra accuratamente la forma della sezione trasversale di qualsiasi superficie. Può misurare profili fino a 3 (76 mm) di profondità ed eliminare l'indovinare le dimensioni delle forme irregolari. DUPLICAZIONE PRECISA DELLA FORMA: copia istantaneamente qualsiasi forma o duplica un profilo per la lavorazione del legno, pavimenti in piastrelle e installazione di linoleum. Questo strumento ANGLE-IZER può replicare le modanature dettagliate o abbinare i ritagli attorno agli involucri delle porte e ai tubi.

Quantity
Aggiungi al carrelloCompra subito

EAN: 733353399667

Categories: Strumenti e miglioramento della casa, Strumenti di misurazione e layout, Strumenti di marcatura,

STRUMENTI GENERALI: Da molti anni siamo leader riconosciuti nell'innovazione, nella progettazione e nello sviluppo di strumenti fai-da-te specializzati. Incoraggiamo gli artigiani, gli artigiani e i fai-da-te a lavorare in modo più intelligente, misurare meglio e aumentare la produttività. CORNER TRIM: ideale per misurare modanature per la riproduzione, duplicare mandrini sul tornio, copiare curve e vari altri lavori di adattamento dei contorni. Basta premere i denti dello strumento su un contorno e tracciare. PERNI ULTRA SOTTILI: Il nostro rilevatore di spigoli a 6 è dotato di perni in acciaio inossidabile resistenti alla ruggine per prestazioni di lunga durata e una maggiore precisione rispetto ai denti in plastica. Questo strumento modello ha anche segni di righello sul corpo con incrementi di 1. PROFILO PERFETTO: Con 35 fogli per pollice, il nostro duplicatore di contorni registra accuratamente la forma della sezione trasversale di qualsiasi superficie. Può misurare profili fino a 3 (76 mm) di profondità ed eliminare l'indovinare le dimensioni delle forme irregolari. DUPLICAZIONE PRECISA DELLA FORMA: copia istantaneamente qualsiasi forma o duplica un profilo per la lavorazione del legno, pavimenti in piastrelle e installazione di linoleum. Questo strumento ANGLE-IZER può replicare le modanature dettagliate o abbinare i ritagli attorno agli involucri delle porte e ai tubi.
Batteries Included? ‎No
Batteries Required? ‎No
Color ‎Stainless Steel
Country of Origin ‎USA
Customer Reviews 4.1 4.1 out of 5 stars 4,474 ratings 4.1 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Included Components ‎....
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎Yes
Item model number ‎837G
Item Package Quantity ‎1
Item Weight ‎2.4 ounces
Manufacturer ‎General Tools
Material ‎- Select -
Part Number ‎837
Power Source ‎Hand Powered
Product Dimensions ‎6 x 3.5 x 1 inches
Size ‎6-Inch
Warranty Description ‎No Warranty

3.2

13 Review
5 Star
57
4 Star
18
3 Star
12
2 Star
5
1 Star
8

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Tom
Pleasantly surprised. Works OK
I wanted a metal one, as this is, because of the much finer resolution. I was concerned that it might not work well, because of all the negative reviews. Well, it is a bit fragile, it isn't easily adjustable if at all, and it's a little bit stiff, but it works fine. My recommendation is to baby this thing. I'll probably make a box for it. It's not going to stand up to rough use, and if it falls apart I can see it being miserable to try to get back together. But again, it works. My use for it? To get contours for various wood trim things or obstacles when replacing trim or making moldings. For that it should be perfect.
Scritto da: cruciantime
Works great, very happy.
I bought this when I built a flintlock rifle. Worked great on comparing parts of the wood on the stock for matching shape. I liked it. I just ordered a second one for some revolver grips that I am making. I wanted a second one to help with profiles. General makes nice stuff. Their metal rulers are great too.
Scritto da: 2sapoton
Good as received
General used to offer high quality but cost-effective tools made in the USA. To stay in the same market niche, they've had to go overseas for manufacturing like almost everyone else, and on some things quality has suffered. Their USA-made tweezers were great, but the overseas-sourced ones can be awful. Not sure where this is made – not marked on the tool or the packaging that I can find. But at least for this example, the contour gauges are still okay. The finger pitch is almost double what it is for one of the 10”/250 mm Taiwanese plastic contour gauges, making it a nice companion to those, for smaller work. The stiction of the fingers is just right, but that will probably change with wear – and there is no adjustment. To those who bent fingers or had fingers slide completely out the slot: it is layout tool – you have to take care of it, and if you didn’t, that’s not the tool’s fault.
Scritto da: Cleve
Requires DIY modification to be useful
The metal pins are quite thin, which theoretically gives this contour gauge a better level of precision than most of the other ones out there. However, they are held in entirely by friction, achieved by having the two ends clamped down ridiculously tight. This means you have to press the gauge against whatever you’re taking an impression of very hard, which risks damage to the thing you’re measuring. Worse, the friction between pins so high that sometimes adjacent pins get pulled down a little when the pins next to them move, which gives less fidelity to the impression. The pressure you have to use to take the impression can also bow pins at the edges, which also reduces fidelity. And finally, because there is no lock, you risk messing up your impression as you trace it. As someone else in the comments said, very carefully prying up the crimped edges to reduce the friction can improve most of these issues, but it’s a fine line between too tight and too loose. All in all, if you already bought one you can take steps to improve your experience, but if you haven’t bought one yet I recommend getting something better.
Scritto da: DMan
Not bad expecially for the price. Does the job but does have a few minor concerns.
It does a pretty good job at taking an imprint expecially if you help the pins a bit. I havent had a lot of experience with these tools so Im not sure these are the normal problems these things have. I got this one over the plastic thicker ones in hopes the tiny pins would bring more accuracy but at least in this one its all revited together very tightly so a lot of the pins stick together leaving gaps or ledges where there were none when taking the inprint if you dont carefully help seperate and push or pull the pins to help it. Also the pins have no stop on the ends of them so you have to be careful not to accidentally pull pins through because you can pull them straight through and out of the device (Im not sure if they are easy to put back in). As I mentioned before this thing is revited together so there is no taking apart by screws to fix or adjust. Another thing I didnt think about when buying but realised after leaving this thing for awhile, that any moisture will cause the pins to start to rust. A quick sand and a little oil will probably fix this and maybe make the pins a little smoother but I havent tried that yet. All in all its not a bad tool, it does its job well, expecially for its price.
Scritto da: A. Saye
Will fall apart if not super careful handling it
The media could not be loaded. Like that it gives detailed measurement. But this has already fallen apart 2 times and I held it by the tiny metal pieces and they fall right out. Lost a few sticks
Scritto da: Tony Thiel
Does what it's suppose to do quite efficiently.
My next-door neighbor who is a retired doctor just installed wood flooring in one of his rooms. He had a rounded (odd shaped) corner (bullnose) where he wanted to install a quarter round vinyl baseboard. The problem was he did not want the standard way of cutting angle pieces to follow the curvature of the bullnose. He was told by someone at the local HD store that these vinyl mouldings can be heated with a heat gun to form the desired curve. And that's what he wanted me to do. This tool helped a lot in copying the exact curvature and with the help of a heat gun, we were able to accomplish what he wanted. I copied (traced) the curved on a piece of 1 x 8 scrapped wood, then cut the curve with a jig saw. I then nailed that piece of wood on top of a wider piece and used that to curve the vinyl moulding. So I guess he's a happy bear! lol
Scritto da: Kenton
Good buy with fast shipping
I really like that this model had so many pins per inch, it makes it so much more useful than the typical plastic gages out there because you can get a much more accurate representation of the profile. The only down side is that they are just pins as opposed to flat plates so as you apply this to a profile you have to be careful that you push straight down or else the pins may bend. Another down side is that the pins are suspended in the middle of the gage, making it difficult to get the profile of something on the floor. Last, as I was looking into this sort of thing I could never find how the gage keeps the profile. This gage keeps the profile through friction between the pins and the casing. Despite all this gave it a 4 because probably is close to the best you will find and arrived early.
Scritto da: Amazon Customer
Very Inaccurate - I sent mine back
The pins do not stay parallel or in place- I took this on site to measure some architectural profiles and about 10 the pins actually dropped out in front of the client which was highly embarrassing and looked really unprofessional. Terrible quality.
Scritto da: Rohan Kotecha
Good for ocassional use
Does job well.... delicate den expected...nit meant for constant field use
Scritto da: Samantha
Not fit for purpose. I want my money back!!
This is utter rubbish. When you use it the pins bend and move around to the sides diagonally so you cannot get an accurate shape. There are not specific holes for the pins, that are all just shoved in the same gap and pins also fall out when you try to use it as there is nothing holding them in at all. I spent more time trying to straighten out the pins and put them all back in than doing my DIY job! Don’t waste your money!!! I cannot return this now as I had it to long before I needed to use it and it is too late for a refund even though it is not fit for purpose. I WANT MY MONEY BACK!
Scritto da: tomasz
rubbish!
I have paid for new product, meanwhile the send me used !!! contour gauge has a lot of scratches.. it is just rubbish...do NOT waste a money for this
Scritto da: ParmX
Good but a couple of issues to note.
It definitely saves time and mistakes as the hole is always 5mm from the edge. Also, as it is clamped down, there is no chance of it moving during drilling - so great. But 2 demerits: 1) The guide holes did not line up with the (Blum) hinges I was using. I don't know which manufacturer's hinges the guide holes are designed for. 2) The design does not allow for certain 35mm drill bits to be used. I bought an expensive Bosch drill bit and the shaft changes diameter right at the point where the locking screw (to set the depth) locks in. So, if you want to use an alternative drill bit to the one provided (which does the job okay but will blunt), you will have to hunt around for one with a longer thick shaft section.

Prodotti correlati

hot
Malco A60 Scriba in lamiera, argento
3.7/5

€ 43.91

Malco A60 Scriba in lamiera, argento
3.7/5

€ 43.91

hot
IRWIN Tools STRAIT-LINE Gesso per marcatura di macchie permanenti, blu indaco, 4 libbre (4935524) blu indaco 1 unità (confezione da 1)
3.7/5

€ 66.29

IRWIN Tools STRAIT-LINE Gesso per marcatura di macchie permanenti, blu indaco, 4 libbre (4935524) blu indaco 1 unità (confezione da 1)
3.7/5

€ 66.29

hot
Keson PM103BLUE ProChalk gesso permanente, blu, 3 libbre blu 3 libbre (confezione da 1)
3.6/5

€ 59.58

Keson PM103BLUE ProChalk gesso permanente, blu, 3 libbre blu 3 libbre (confezione da 1)
3.6/5

€ 59.58

hot
General Tools 83 Pocket Scriber, 4-15/16 pollici Lunghezza totale 1 conteggio (confezione da 1) Pocket Scribe
3.5/5

€ 24.35

General Tools 83 Pocket Scriber, 4-15/16 pollici Lunghezza totale 1 conteggio (confezione da 1) Pocket Scribe
3.5/5

€ 24.35

hot
Strumento di scrittura FastCap Accuscribe, nero
3.4/5

€ 42.92

Strumento di scrittura FastCap Accuscribe, nero
3.4/5

€ 42.92

hot
IRWIN STRAIT-LINE Gesso per marcatura, colorazione permanente, rosso cremisi, 4 libbre (4935525) rosso cremisi 1 unità (confezione da 1)
3.7/5

€ 70.01

IRWIN STRAIT-LINE Gesso per marcatura, colorazione permanente, rosso cremisi, 4 libbre (4935525) rosso cremisi 1 unità (confezione da 1)
3.7/5

€ 70.01

hot
IRWIN Tools STRAIT-LINE 65104 Gesso per marcatura standard, 5 libbre, bianco (65104)
3.4/5

€ 52.01

IRWIN Tools STRAIT-LINE 65104 Gesso per marcatura standard, 5 libbre, bianco (65104)
3.4/5

€ 52.01

hot
IRWIN Tools STRAIT-LINE 64901 Gesso per marcatura standard, 8 once, blu (64901)
3.4/5

€ 20.84

IRWIN Tools STRAIT-LINE 64901 Gesso per marcatura standard, 8 once, blu (64901)
3.4/5

€ 20.84

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu