Fibaro FGDW-002-1 FGDW0021 Porta/Finestra v2 con sensore di temperatura, Z-Wave Plus, FGWD-002-1, Bianco

Name: Fibaro FGDW-002-1 FGDW0021 Porta/Finestra v2 con sensore di temperatura, Z-Wave Plus, FGWD-002-1, Bianco
Brand: FIBARO
SKU: 0857934005553
Price: 75.29 EUR
Availability: InStock

Brand:FIBARO

2.7/5

€
75.29

Funziona con SmartThings, Samsung connect, Verizon Smarthub, Nexia, Homeseer, Fibaro HC2/HCL. Non compatibile con HomeKit - Vedi ASIN B01M9CQSB5. Il sensore è certificato UL (UL E364701) e certificato Z-Wave Plus zc10-17035512 con 2 anni. durata della batteria. Il sensore di manomissione integrato aggiunge ulteriore sicurezza e tranquillità. Attiva automaticamente scene pre-programmate quando il sensore rileva l'apertura/chiusura. (Potrebbe richiedere un controller compatibile). Rileva l'apertura e la chiusura di qualsiasi porta, finestra, cancello o porta del garage con sensore di temperatura integrato.

Quantity

Aggiungi al carrello Compra subito

EAN: 0857934005553

Categories:

Brand	FIBARO
Color	White
Item Weight	0.1 Pounds
Maximum Range	130 Feet
Power Source	Battery Powered

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: IAMSTUCK

Install needs to be perfect

Pairing with hub (hubitat) was painless. Getting this to install on my door was a nighmare. One of the reasons I got this was because it was small. That ended up being a bad thing. The sensor and magnet need to be lined up perfectly in order to work properly. I had to tilt the sensor slightly in order to get an accurate reading. Screws are not included and the screw holes are very small. the adhesive is garbage. Thankfully I had som 3m small strips laying around. Went through a few to get it perfect. It works now but was way harder than it needed to be.

Scritto da: Phil De

Good Temp Sensor, Works With Vera, Flaky Tamper

I have a few of the Fibaro Door/Window sensors Version 1 (needs external temperature probe) around, and thought I'd try these out because they have the temp sensor internal. It uses the S-2 security, and I sometimes have to "fight" with my Vera Secure to get S-2 devices paired. The first FGDW-002 went easy, the second one did not. I ultimately did a "factory reset-restore from backup" cycle on the Vera, and it paired immediately after that. The second one also had a problem with one of the tamper switches. It uses the pressure from the sensor cover when in place to push on a switch on the side of the internal sensor body. The first FGDW-002 had no problems, but the second one would not depress the switch properly. So I had to tape a thin piece of cardboard to the inside of the sensor cover in the right place so it would depress the switch when the cover was put on. This may have been part of my pairing problems with it, I don't know. Another negative is the convoluted method by which you do a factory reset. Hold both tamper buttons, and with your third hand, insert the battery, wait for the right kind of flashing on the LED, let a button go, press it again, hope for the best. It's a pain.

Scritto da: Cameron Rector

Does’n always report correctly

I have mounted this sensor on my shop door. Sometimes it works and reports temperature and other times it doesn’t. Tried a lot of things but I can’t trust what it is reporting

Scritto da: D. Dallas

Easy to install

Got this for my techie son-in-law, which he enjoyed mounting to his pantry door and linking it to his telephone app for turning on the light from a different area of the house. Product also arrived in a timely fashion.

Scritto da: D. Khan

Lower battery life

Paired easily with my hub. Altgough this unit used 2xAAA batteries, so battery life isn't as good

Scritto da: Peter J.

Just does not work

Just got the sensor. First, the directions are incorrect. The tamper switch needs to be held on for the pair to work. Then the switch inside needs to be selected. The directions do not say this. Once it was paired, the sensor showed 87 degrees but it was 73 in the house. No matter how is positioned the sensor, it would only show open door about 20% of the time. Sorry, this sensor just does not work.

Scritto da: Corey

did not meet expectations

The items was easy to put up. The items has been hard to keep it up. Moved on to other products.

Scritto da: Mike

Fibaro - It just works!

This is a great door/window sensor for your Zwave network! I know, i tried them all.

Scritto da: Chris Boersma

Great Door/Window Sensor!

Don't know why there are so many bad reviews of this unit. Overall it does what it should. Integrated seamlessly into Home Assistant and battery life has been really good so far. Sensor is very responsive and I've picked up a few more since my original purchase without any issues. Great unit, great price and would definitely recommend.

Scritto da: Amazon Customer

Five Stars

works well

Scritto da: DJ

Se sale de línea

Lo que esperas de un sensor de puerta es que te brinde seguridad, esté después de lapso de tiempo de inactividad se duerme, lo cual quiere decir que no está activo para indicarte que se abrió la puerta o ventana.