0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

Ergodyne ProFlex 7551 Guanti da Lavoro Invernali Impermeabili, Antitaglio ANSI A5, Palmo Rivestito in Nitrile Sabbia, Fodera in Pile Termico Arancione Large (Confezione da 1)

Brand:Ergodyne

3.2/5

€
30.84

LAVABILE IN LAVATRICE. TESTATO e APPROVATO - Soddisfa EN 388: 4X43E. DESTREZZA - Il doppio strato di lattice e nitrile rimane flessibile nella stagione fredda per una facile manipolazione di attrezzature e materiali. PRESA SUPERIORE - Palmo sabbioso rivestito di nitrile per una presa sicura. IMPERMEABILE - Il lattice completamente rivestito protegge le mani dall'acqua e dall'aria fredda. RESISTENTE AL TAGLIO - Protezione antitaglio ANSI A5. PROTEZIONE TERMICA - HPPE da 13 g con una morbida fodera in pile acrilico spazzolato da 10 g per comfort e calore. Importato. HPPE, poliestere e acrilico.

Quantity
Aggiungi al carrelloCompra subito

EAN: 0720476176749

Categories: Strumenti e miglioramento della casa, Sicurezza sicurezza, Equipaggiamento per la protezione personale, Protezione per mani e braccia, Guanti da laboratorio, sicurezza e lavoro, Guanti resistenti al taglio,

LAVABILE IN LAVATRICE. TESTATO e APPROVATO - Soddisfa EN 388: 4X43E. DESTREZZA - Il doppio strato di lattice e nitrile rimane flessibile nella stagione fredda per una facile manipolazione di attrezzature e materiali. PRESA SUPERIORE - Palmo sabbioso rivestito di nitrile per una presa sicura. IMPERMEABILE - Il lattice completamente rivestito protegge le mani dall'acqua e dall'aria fredda. RESISTENTE AL TAGLIO - Protezione antitaglio ANSI A5. PROTEZIONE TERMICA - HPPE da 13 g con una morbida fodera in pile acrilico spazzolato da 10 g per comfort e calore. Importato. HPPE, poliestere e acrilico.
Brand Ergodyne
Color Orange
Material Polyethylene, Latex
Size Large
Size Large (Pack of 1)
Special Feature Cut Resistant,Flexible,Waterproof

3.2

13 Review
5 Star
59
4 Star
17
3 Star
10
2 Star
5
1 Star
10

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Adan
Work!
These gloves work well for jobs that require high dexterity in cold situations. They don’t work as well when you operate a forklift in a dock area moving freight from one side to another the windchill factor makes the gloves hard and super cold. I work in a non heated dock operating a forklift and definitely wouldn’t recommend for the type of work environment.
Scritto da: Chris
Good for temps above 30°F
Good waterproof gloves. They are warm but there's a limit to this. If it's below freezing you'll begin to feel the cold in about 15-20 minutes especially if you have normally cold hands or you're not doing any heavy physical activity
Scritto da: Ruthie
Glives
These are good for the touch screen, but did not keep my husbands hands warm at all.
Scritto da: Spartan40
Well made, considering getting another pair
About 38 degrees outside, doing general prep work for a new 125-gallon tank. These actually surpassed my expectations, kept hands warm and dry even after reorganizing fully submerged large driftwood I had in a tote. Was able to easily pick out individual pieces of gravel while rinsing. A bit snug around the base of the fingers, but overall I think they're excellent for my purposes and intend on using them often.
Scritto da: not sure
grip texture coating gave out and peeled off within 2-3 hours of first use.
I work as a mechanic in a meat processing facility, it is cold, wet, things are oily, and company requires cut resistant PPE is used when handling any blades... the exact sort of conditions listed off as what these gloves were designed to handle. the grip coating began peeling off almost as soon as they were put to use. I figured the initial peel was a fluke, so I kept on working. not long after they began giving up on life. seems to me the sandy nitrile coating and its latex waterproofing layer substrate are not very compatible, or possibly the nitrile and sand creates a porous or permeable layer that can be soaked through with some sort of chemical that weakens the nitrile. if there are chemicals that can degrade this material that don't degrade regular old nitrile disposable gloves, then it would be nice if that could be in the description rather than repeatedly reinforcing the belief that these gloves are exactly what you want in cold, wet, oily work environments. I will have to go back to one of the lighter non-water proofed gloves, supplemented with good old disposables for water resistance, I suppose. using disposable nitrile gloves on top will make the grip textures they use effectively useless and actually annoying to pull over the fingers for a snug fit. Without the grip coatings that made ergodyne gloves my go-to brand in play, I might as well go with droc/magid offerings instead
Scritto da: max stirling
decently warm outdoors
I deliver windshields and these are very good for warmth and cut resistance in the winter. The palm surface is grippy even when wet and does not leave marks on glass. Temperature rating, for me, is from 25F to 0F. Over 25F I sweat in the gloves and then they are a struggle to take off and below zero F the insulation is not enough. The palm surface does wear if you're rubbing glass edges over a specific location multiple times a shift. For me they always wear out at the knuckles (palm side) on my right hand because that's how I lift and carry windshields. I could put more effort into switching hands but I'll do that when I completely wear through the right hand glove.
Scritto da: Katy Schuettler
Fantastic Super Warm Waterproof Work Gloves!
I love to magnet fish and it is getting cold out so it is so important to have gloves that are cut resistant and waterproof and warm and fuzzy on the inside! Thanks so much these are well worth it!
Scritto da: James O.
Didnt work with touchscreens - Still amazing winter gloves
Great work gloves. I didn't care that they don't work with a touchscreen. They keep my hands warm.
Scritto da: Jenn
Not 2xl as advertised.
Largest size (2XL) fits more like a regular large which was very disappointing.
Scritto da: canuck10115
Work gloves
They Fit pretty good They are waterproof
Scritto da: kevin
could be better
if its really cold i start to feel it. just buy rugged winterproof gloves and lots of hand warmers
Scritto da: Amazon Customer
Starting to breakdown after first use
Feel very water resistant and warm, however, after the first use the grip surface has seperated and is starting to peel off. Pretty unimpressed.
Scritto da: Gary
Small make
Nice glove but small make and a bit pricey

Prodotti correlati

hot
Guanti Ergodyne unisex per adulti resistenti al taglio - A3, 13g ANSI A3 PU Coated CR Guanti, Grigio, Large US
3.5/5

€ 26.63

Guanti Ergodyne unisex per adulti resistenti al taglio - A3, 13g ANSI A3 PU Coated CR Guanti, Grigio, Large US
3.5/5

€ 26.63

hot
Guanti da lavoro resistenti al taglio Ergodyne ProFlex 710CR, livello 4, protezione CR sul palmo grigio, medio
3.1/5

€ 52.70

Guanti da lavoro resistenti al taglio Ergodyne ProFlex 710CR, livello 4, protezione CR sul palmo grigio, medio
3.1/5

€ 52.70

hot
Youngstown Glove Company guanti di sicurezza resistenti al taglio per adulti unisex, multicolore, grande USA, verde grande verde
3/5

€ 71.05

Youngstown Glove Company guanti di sicurezza resistenti al taglio per adulti unisex, multicolore, grande USA, verde grande verde
3/5

€ 71.05

hot
Ergodyne ProFlex 7042 Guanti da Lavoro Resistenti al Taglio, ANSI A7, Resistenti al Calore da Contatto, Palmo Rivestito in Nitrile Sabbia, 13g Aramid Large (Confezione da 1)
2.7/5

€ 36.73

Ergodyne ProFlex 7042 Guanti da Lavoro Resistenti al Taglio, ANSI A7, Resistenti al Calore da Contatto, Palmo Rivestito in Nitrile Sabbia, 13g Aramid Large (Confezione da 1)
2.7/5

€ 36.73

hot
Damascus Gear: DFK300 Frisker K Guanti in pelle resistenti al taglio - Fodere in Kevlar, polsino corto, protezione da vetro/lame di rasoio/oggetti appuntiti (X-Large)
3.4/5

€ 69.25

Damascus Gear: DFK300 Frisker K Guanti in pelle resistenti al taglio - Fodere in Kevlar, polsino corto, protezione da vetro/lame di rasoio/oggetti appuntiti (X-Large)
3.4/5

€ 69.25

hot
Mechanix WEARSMP-C91-010 Guanti resistenti al taglio, giallo ad alta visibilità, L, PR, giallo fluorescente e arancione, grande
3.4/5

€ 75.82

Mechanix WEARSMP-C91-010 Guanti resistenti al taglio, giallo ad alta visibilità, L, PR, giallo fluorescente e arancione, grande
3.4/5

€ 75.82

hot
MAGID Liquid-Grip Sandy Nitrile Coated ANSI A3 Guanti Resistenti al Taglio, 12 Paia, Taglia 8/Medio, Grigio 8/M 12 Paia
3.5/5

€ 105.79

MAGID Liquid-Grip Sandy Nitrile Coated ANSI A3 Guanti Resistenti al Taglio, 12 Paia, Taglia 8/Medio, Grigio 8/M 12 Paia
3.5/5

€ 105.79

hot
MAGID Guanti da lavoro resistenti al taglio livello A4 assorbenti olio e liquidi, 12 PR, con comfort e raffreddamento avanzati, rivestimento TriTek, taglia 9/L, riutilizzabili, calibro 13 DX Technology Steel-Free Core (DXG48) rivestimento palmo 9/L 12 paia
3.5/5

€ 223.67

MAGID Guanti da lavoro resistenti al taglio livello A4 assorbenti olio e liquidi, 12 PR, con comfort e raffreddamento avanzati, rivestimento TriTek, taglia 9/L, riutilizzabili, calibro 13 DX Technology Steel-Free Core (DXG48) rivestimento palmo 9/L 12 paia
3.5/5

€ 223.67

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu