EATON OS310U-LA-K Cablaggio Interruttore sensore presenza/assenza a 3 vie, infrarossi passivi 1000 W, 120 V ca, 180 gradi, 3 in L

Name: EATON OS310U-LA-K Cablaggio Interruttore sensore presenza/assenza a 3 vie, infrarossi passivi 1000 W, 120 V ca, 180 gradi, 3 in L
Brand: Eaton
SKU: 0032664710858
Price: 62.17 EUR
Availability: InStock

Brand:Eaton

1.8/5

€
62.17

Per lampade a incandescenza, magnetiche a bassa tensione (MLV), elettroniche a bassa tensione (ELV), fluorescenti, fluorescenti compatte, LED e motori fino a 1/6 HP. Include luce notturna selezionabile e dimmerabile. Si accende automaticamente quando una persona entra nella stanza, spegne automaticamente le luci dopo un ritardo di tempo selezionabile di 5 secondi (modalità test), 5 minuti (impostazione di fabbrica), 15 minuti e 30 minuti. Rileva quando la stanza è occupata molto brevemente e accorcia il ritardo per risparmiare energia, include una regolazione del livello di luce per la luce diurna per evitare che il movimento accenda le luci. Fornisce un campo visivo di 180 gradi e 1000 piedi quadrati di maggiore copertura del movimento. Include un piatto da parete di medie dimensioni decoratore. Un LED verde indica lo stato del carico, fornisce la luce del localizzatore al buio e lampeggia per indicare il rilevamento del movimento. 8,3 amp, 1000 watt, 120 volt CA, 60 Hz. 6 conduttori pre-spelati, n. 14 AWG. Classificato cULus, certificato NOM, conforme al titolo 24 della California. Classificazione di temperatura da 32 a 104 gradi F. I sensori di presenza SAVANT attivati dal movimento Eaton OS310U-LA-K sono una scelta eccellente quando si sceglie l'efficienza energetica e il risparmio di denaro, l'illuminazione automatica o i controlli degli elettrodomestici. Questi sensori utilizzano la più avanzata tecnologia a infrarossi passivi (PIR) per rilevare il calore emesso dai corpi in movimento mentre attraversano il campo visivo del sensore. Ottimo per aree di uso comune, come officine, bagni, ripostigli e corridoi, questo sensore di presenza assicurerà che le luci non vengano mai lasciate accese per sbaglio. Quando il sensore determina l'assenza di movimento per il periodo di tempo specificato, spegnerà automaticamente la luce collegata. La funzione di accensione della luce può essere controllata manualmente o automaticamente con le modalità Auto-On/Auto-Off o Manual-On/Auto-Off. Una luce notturna a LED è integrata nell'interruttore e può essere accesa/spenta o regolata in base alle esigenze dell'utente. Questo interruttore di presenza può essere utilizzato in applicazioni unipolari (commutazione a posizione singola) o circuiti a 3 vie e gestisce carichi fino a 1.000 Watt o 1/2 HP. Compatibile con i tipi di carico più comuni, questo interruttore può essere utilizzato per illuminazione a incandescenza, fluorescente, magnetica a bassa tensione, elettronica a bassa tensione, CFL o LED, nonché apparecchi come ventilatori a soffitto.

Prodotto non disponibile

EAN: 0032664710858

Categories: Strumenti e miglioramento della casa, Elettrico, Interruttori e dimmer, Interruttori a muro, Interruttori attivati dal movimento,

Il sensore di presenza fornisce un'esclusione della luce ambientale selezionabile che impedisce l'accensione delle luci in presenza di luce naturale accettabile. Funziona con tutti i tipi di carico più diffusi: incandescente, magnetico a bassa tensione, elettronico a bassa tensione, fluorescente, fluorescente compatto (CFL) e LED. Unipolare o a 3 vie (controlla una luce da due posizioni).

Batteries Required?	‎No
Brand	Eaton
Certification	‎NOM
Country of Origin	‎China
Customer Reviews	2.8 2.8 out of 5 stars 15 ratings 2.8 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎Electrical & Heating;Cord & Power Management;electrical-outlet-switches
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item model number	‎OS310U-LA-K
Item Package Quantity	‎1
Item Weight	0.01 Pounds
Item Weight	‎0.16 ounces
Manufacturer	‎EATON
Mounting Type	Wall Mount
Mounting Type	‎Wall Mount
Part Number	‎OS310U-LA
Product Dimensions	‎6 x 2 x 4 inches
Switch Style	‎Temperature Switch
Switch Type	‎3-way

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Mike Carlson

False motion detection, lights will not turn off

Ignoring other reviews about false motion detection I decided to try this model since it has a manual on override feature that is hard to find and thought the problem must be fixed by now! This unit replaced a motion sensor in our garage that worked great except for the lack of being able to override the timeout while working in the area. I am comfortable with wiring so the wiring diagram was clear and easy to accomplish. Once power was restored the lights turned on after detecting motion, I thought great, then noticed they would not turn off. Setting the timer to 'test' caused the lights to cycle on and off every few seconds, but again stayed on constantly after setting the timeout back to 5 minutes, apparently from the false motion detection re-triggering the timeout timer. I even tried to cover the motion window and still no change. Thinking this must have just been a bad unit I ordered a replacement and sure enough this one had the same problem. Frustrated I finally reinstalled my original motion sensor (Leviton IPS06) and everything worked great except for the original lack of a manual on override. Since this is in a 3-way switch arrangement with the load at the motion switch and a toggle switch across room from each other, I realized it was easy to install at the motion switch a jumper from the traveler wire to the load and bypass the motion sensor forcing the lights to say on. Although this is not the most ideal since the toggle switch is no longer a second location to turn the lights on and off from, but in my garage this isn't a problem. Installing the jumper wire now gives me, at least functionally, what I wanted in the first place. I can't say that this solution will work with all motion sensors due to differences in their internal components and design but it did for me.

Scritto da: PeterP

This device gets a star for the fact that it ...

This device gets a star for the fact that it does detect movement, but it is plagued by false detections and failures to turn off. Often, I come down in the morning to find it switched on where there has been no motion in the previous 7 hours. The location i have it in is perhaps challenging for a sensor. It is in a pantry, so a small room, and the cabinets have under cabinet lights. The sensor is pointing into the room, so as to detect someone coming into the pantry, but someone not walking past the doorway So, the sensor is pointing towards the under cabinet lights, which could create problems. However, I have a Leviton ODS15-IDI in a very similar situation and that works perfectly. In the end, I tired of the Eaton sensor not doing its job and turning the lights on for long periods, and I replaced it with another Leviton sensor. I can report the Leviton again works perfectly. It’s a little more expensive, but I can be hopeful that I will save in the long run on the extra electrical costs incurred with the Eaton sensor.

Scritto da: Rich

Do not buy new old stock units! Check date code!

I bought this from Amazon because they had the best price. Little did I know that the seller was selling NOS which according to cooper wiring devices is from a batch of DEFECTIVE units with corrupt firmware and inferior components. After being frustrated at installing it and not having it function correctly at all (I’m a union electrician for more than 40 years) and I subsequently returned it to cooper for a replacement which is when I found out about the bad batch of occupancy sensors they produced. Check sticker on outside of unit and if date is older than 3 months return it or you may have to go through same issues as I did. I will say the new replacement unit is functioning perfectly and has not exhibited any problems so far. I gave one star to get attention of those who actually read the one star reviews first, but the replacement unit gets 5 stars.....

Scritto da: Chris N.

Great motion Sensor!

Great motion sensor, works well in closets and bathrooms. My only knock would be that the timer is 5sec, 5min, 15min, or 20min. Some shorter intervals would be nice but keeping the setting at 5sec works well for us when we're in the closet. The light never goes off as the sensor is very responsive. Lastly, most will want to follow the first diagram if you're using this to replace a switch. It took me a second to figure out what setup I have.

Scritto da: Dave

Failed after 3 weeks on nominal load.

Worked great for three weeks. I twas nice to enter the garage with a handful and have the lights turn on automatically. Supposed to handle loads up to 1000 watts. I had a load of 300 watts on the system and it failed. The switch doesn't turn off. I got online to try to return it but since I didnt install it immediately and it has been 2 months now I cannot return it. So I am going to try to work with the manufacturer to get the device returned.

Scritto da: J. Bock

Died after 6 months

The sensor worked fine for 6 months, then it no longer turned off automatically. I spoke with the company and they require that I send in the switch before they will send me a new one. That is not practical, so I am looking for another product.

Scritto da: Bruce De Wit

Works as expected

Excellent range and that is what I wanted. It is running 6 fluorescent fixtures and the three way works as expected. Interestingly it was a ivory color in a sealed light almond package. But it in a workroom anyway.

Scritto da: john

Two Stars

you need a third wire for it to work, therefore won't work on most, especially older, switches