Dispositivo di fissaggio difficile da trovare 014973239640 Bulloni di sollevamento, 1/4-20 x 2, pezzo-10 1/4"-20 x 2"

Brand:Hard-to-Find Fastener

3.8/5

€
29.17

Disponiamo di un'ampia varietà di elementi di fissaggio ideali per molte applicazioni in casa, azienda agricola, azienda, automobili e industria. La maggior parte dei nostri elementi di fissaggio ha una leggera zincatura sull'acciaio che conferisce una finitura più resistente alla ruggine. Vendiamo anche prodotti rivestiti e inossidabili per una maggiore resistenza alla ruggine. Disponiamo di molti gradi di elementi di fissaggio che vanno dall'acciaio a basso tenore di carbonio fino all'acciaio temprato e trattato termicamente. Non tutti i dispositivi di fissaggio sono applicabili a tutte le applicazioni, quindi assicurati di testare accuratamente e ottenere il parere di un edificio autorizzato o di un ingegnere edile o strutturale certificato prima di fare affidamento su questi dispositivi di fissaggio per qualsiasi situazione in cui il guasto potrebbe causare danni a proprietà o persone.

Quantity

Aggiungi al carrello Compra subito

EAN: 0738287713213

Categories: Prodotti industriali e scientifici, Chiodi, viti e elementi di fissaggio, Bulloni, Bulloni dell'elevatore,

Stile della testa: piatto svasato. Finitura: zinco. Materiale: acciaio. Lunghezza: 2 pollici. Diametro: 1/4.

Assembled Diameter	‎0.25 Inches
Batteries Included?	‎No
Batteries Required?	‎No
Brand	‎Hard-to-Find Fastener
Country of Origin	‎China
Customer Reviews	4.7 4.7 out of 5 stars 316 ratings 4.7 out of 5 stars
Cutting Diameter	‎0.25 Inches
Domestic Shipping	Item can be shipped within U.S.
Exterior Finish	Zinc
Exterior Finish	‎Zinc
Fastener Type	‎Elevator Bolt
Finish	‎Zinc
Grade Rating	Grade 5
Grade Rating	‎Grade 5
Head Style	‎Dome
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item model number	‎014973239640
Item Package Quantity	‎1
Item Weight	‎1.76 ounces
Manufacturer	‎Hard-to-Find Fastener
Manufacturer Grade	Grade 2
Manufacturer Grade	‎Grade 2
Material	Steel
Material	‎Steel
Measurement System	‎Inch
Part Number	‎EBFCS-070-10
Product Dimensions	‎3.5 x 2.62 x 1.44 inches
Size	‎1/4"-20 x 2"
Thread Size	1/4"-20
Thread Size	‎1/4"-20
Thread Type	‎Coarse

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Blake Sullivan

You can get creative w these. Note: countersink.

These things are great. Needed to find something rock solid for mounting a boxing speed bag platform through 3/4” maple planks while sitting flush against OSB prior to bolting the entire unit through studs w lags. These are so much better (and easier) than carriage bolts if you’re looking to make that perpendicular connection which needs a flush backing. NOTE: keep in mind there’s a very slightly angled flange on the underside, so you’ll need to sand a small area (I did a very non-pro/DIY-worthy job of this w Dremel+sanding cones and it still worked great) countersink and note the square; and make sure to account for the small, square shaped pieces which connects the bolt w the head and countersink for that. THESE ARE GLORIOUS WHEN YOU NEED EM!

Scritto da: Luckster

Head is too big

Bolts are of great quality. However, heads are much too large for my use. Listing didnt state diameter, which would have helped in making the correct purchasing decision.

Scritto da: Mustang Gregg

Good hdwe.

I like them.

Scritto da: David Deupree

Worked well!

5 star if they supplied dimensions.

Scritto da: Zach P.

Stripped 3 of 10....bad threads or bad grade?

Had a couple of these 1/4" elevator bolts strip with very little torque. Using these bolts to secure a 3/4" plywood board to mounting brackets on the back of the boat for a swim deck (20"x78"..so not a full sheet) I'm building...wanted the flush surface given a mat is going to lay on top of the deck... Snugging up the first bolt, stripped...swap it out....stripped....third times the charm? Nope.....stripped... Not like I was using a torque wrench to put the nuts on but I can't imagine it was more than 40ft/lbs when these stripped. Super unfortunate cause I can't seem to find any stainless elevator bolts....hopefully the remainder of the ones I used will hold up through stress and use on and around water.

Scritto da: Nico

Disappointed.

Great elevator bolt but the head was too large. It would not fit on a hasp. Still looking for a flat head bolt but with smaller diameter and a half inch longer.

Scritto da: Flip

Good quality

My elevator is firmly held in place, thanks to these fine bolts.

Scritto da: Sam

Hard to find fasteners

These low profile head bolts were exactly what was needed for installing the new bumper, brackets and guard on my truck