CURT 56033 Cablaggio rimorchio personalizzato a 4 pin lato veicolo, compatibile con Infiniti G25, G35, G37, Q60, Nissan Rogue

Name: CURT 56033 Cablaggio rimorchio personalizzato a 4 pin lato veicolo, compatibile con Infiniti G25, G35, G37, Q60, Nissan Rogue
Brand: CURT
SKU: 0612314560332
Price: 106.05 EUR
Availability: InStock

Brand:CURT

3.7/5

€
106.05

Se il tuo veicolo non è dotato di cablaggio per il traino di un rimorchio, il cablaggio personalizzato CURT è la soluzione ideale. Un cablaggio personalizzato, chiamato anche connettore a T, è un semplice dispositivo elettrico plug-and-play che si collega al sistema elettrico dell'auto e fornisce una connessione di cablaggio del rimorchio standard e universale. Questo viene fatto utilizzando due o più connettori specifici per il veicolo e compatibili con l'OEM da inserire nel gruppo fanale posteriore, eliminando la necessità di tagliare, giuntare e saldare durante l'installazione. I cablaggi personalizzati sono realizzati in modo specifico per il veicolo e, sebbene non siano disponibili per tutti i veicoli, offrono uno dei modi più rapidi, semplici e sicuri per cablare un veicolo per il traino. Questo particolare cablaggio plug-in fornisce una presa per connettore piatto a 4 vie ed è progettato per essere un cablaggio personalizzato per adattarsi a determinati anni di Infiniti G25, G35, G37 e Q60 e Nissan Rogue (per verificare la compatibilità del veicolo, vedere le informazioni sull'applicazione ). Viene fornito con tutti i componenti di cablaggio necessari per stabilire un collegamento affidabile del cablaggio del rimorchio, nonché una copertura antipolvere per mantenere pulito il connettore quando non viene utilizzato. Hai in mente un'immagine della tua prossima destinazione: forse è la barca che approda nel tuo punto di pesca preferito, forse è un campeggio che si affaccia su uno dei capolavori della natura, o forse è il prossimo grande cantiere. Tuttavia, trasformare quell'immagine in realtà richiede molto più che sognare ad occhi aperti. Ci vuole una connessione solida e la giusta quantità di energia.

Quantity

Aggiungi al carrello Compra subito

EAN: 0612314560332

Categories: Settore automobilistico, Accessori Esterni, Prodotti per il traino e verricelli, Accessori per attacchi, Cablaggio,

COPERTURA POLVERE. Per promuovere un uso duraturo e la resistenza agli agenti atmosferici, questo cablaggio per illuminazione a 4 poli per rimorchio viene fornito con una copertura antipolvere in gomma. Si adatta facilmente al connettore piatto a 4 vie quando non viene utilizzato, proteggendolo dagli elementi esterni. POTENZA AFFIDABILE. Questo cablaggio del rimorchio a 4 vie è realizzato con tecnologia a montaggio superficiale. Questo tipo di circuito genera meno calore, intensità della luce ottimale e prestazioni durevoli. SPECIFICO DEL VEICOLO. Questo cablaggio aftermarket per veicolo-rimorchio è progettato per anni selezionati di Infiniti G25, G35, G37 e Q60 e Nissan Rogue. CONNETTORE STANDARD. Questo cablaggio plug-in per rimorchio a 4 piatti può essere utilizzato per collegare le luci posteriori del rimorchio, le luci di segnalazione dei freni e gli indicatori di direzione. Il cablaggio della luce del rimorchio a 4 vie è popolare su una varietà di rimorchi, aggiungendo opzioni di traino versatili per il tuo veicolo. FACILE DA INSTALLARE. Nessun taglio! Nessuna giunzione! Questo kit di cablaggio del rimorchio si collega al cablaggio di fabbrica esistente sul veicolo e lo dota di un connettore di cablaggio del rimorchio a 4 pin posteriore standard per il collegamento e il traino di un rimorchio.

Brand	CURT
Brand	‎CURT
Country of Origin	‎Mexico
Customer Reviews	4.6 4.6 out of 5 stars 831 ratings 4.6 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	9 x 6 x 3 inches
Item model number	‎56033
Item Weight	1.57 Pounds
Item Weight	‎1.56 pounds
Manufacturer	‎CURT
Manufacturer Part Number	‎56033
Material	Rubber
Model	‎Custom Wiring
OEM Part Number	‎56033
Product Dimensions	‎9 x 6 x 3 inches
Wattage	‎3.00

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Denis Garate

Works perfect

Not drilling. Just plug and go. Well, it took some time because we had to bring the wire under the car and open some panels in the trunk but the connections were easy.

Scritto da: Mick

Fair value but not plug and play as the OEM Nissan kit is

I did a lot of research before deciding to purchase this Curt kit for my 2019 Rogue and I want to pass on what I have learned so that others can make an informed decision. This kit is 1/3 the cost of the OEM Trailer hitch wiring kit from Nissan parts. That is really its only advantage. It is not totally plug and play like it is advertised to be. None of these after market kits are truly plug and play because they do not provide a connector to get the needed 12V power from the factory wiring harness connector like the OEM Nissan provides. This means you must run the power wire underneath the car to the engine compartment being careful not to install it where it is subjected to exhaust heat. Unless you are nimble, it will be difficult to get underneath the car to properly route the wire. Really the car must be raised to do this. Of course you can get inventive and run the power line through the interior. There are two alternatives to running the power line to the battery in the engine compartment. The first is to use a standard 12V 6 foot, 16 AWG male plug to the accessory power socket in the rear cargo bay which will cost under $10 and available at Amazon. After it is connected to the converter hot and ground using some butt connectors, just plug it in when it is needed. Typical trailer lights will draw a max of around 10A so make sure you have a 15A fuse in the line of your plug if it does not have one built in. The second is to use the provided plug on the Nissan wiring harness that is close to the driver side tail lamp and is visible through the access panel where the jack is stored. It has two wires, blue and beige. The beige is hot and the blue is ground. Others have reported the opposite and that is not correct. Also, others have reported that they needed to install a 30A fuse in the front most fuse panel in the engine compartment underneath the air intake. I went through the hassle of doing this and found that the fuse was already installed in my 2019 Rogue, so do this step after you have it wired and want to test it. Because this Curt aftermarket kit does not provide a plug and play connector for power, you have to get a little inventive. Strip the black power wire insulation a little bit more and solder on a spade electrical connector. You will then slot this into the grey/beige wire side of the provided factory connector. I then put some silicone caulk around it to make sure it does not come out. Instead of putting the white ground connector into the blue wire slot (ground) on the plug, I just fastened it to the installed factory ground screw which is used for multiple grounds in that area. If you do not have a trailer to make sure it all works before you button it up, purchase a CURT 58260 Vehicle Socket Tester. Everyone makes it sound like a piece of cake to install this kit. I did not find that to be the case. The side panels were tough to get out without breaking the plastic clips and I had some trim tools to use and know how to do this. I also found unplugging the connectors was not easy because it was not intuitive on how to get them apart due to their recessed location and a small locking tab that must be pressed. Removing the panels completely would have made that easier for me, but none of the instructional videos said that would be needed. Lastly don't bother using the provided double sided tape provided to sevure the converter. It will not hold. Either get some high quality 3M tape or just use zip ties to secure it to the wiring harness like I did. Update- some have commented that the Nissan Rogue remote foot controlled tailgate no longer works with a hitch while some say it does by moving your foot so that it is not in the center under the receiver. Some say you need to get an modification to the ECU. I want to clarify this because where you kick makes all the difference in whether it will work. If you kick close to the center of the bumper as implied, it has always been erratic. With the hitch on, I could not get the tailgate to work at all kicking center or just off center around the receiver. However kicking under one of the two sensors on either side of the center is where you need to kick. These sensors can be readily seen on the flat rear part of the bumper and just line your foot up with one of them and the tailgate will operate every time. As it turns out the sensors are not underneath the bumper as I, and many believed. They are on the flat vertical part of the bumper facing rear instead of down.

Scritto da: Anthony P.

Good Product

Got this for a 2019 Nissan Rogue. The product is great gave it 4 stars only because of installation. Although not hard to install it does take time and can be frustrating. Instructions and YouTube videos don’t match what I seen removing interior trim so it could lead to some frustration.

Scritto da: Josh flick

Easy to install but takes some time to route wiring

Very easy to installation after watching the YouTube video. Took roughly 2.5 hours to install with most of that time spent under the vehicle routing the wire to the battery. The plug and play wire connectors were simple enough and would recommend to others.

Scritto da: Kayla

Time consuming but worth it.

Trailer lights work thanks to this product. I just wish I knew ahead of time that I didn’t have to run the power wire to the battery like the instructions said. That took a lot longer than installation should have and it was a pain. I wasn’t sure if it would work so I just did what the instructions told me to do so that way I knew it would work. That alone is a huge inconvenience in itself. Other than that, I have no complaints. Aside from spending most of your time removing plastic trim and running the wire to the battery, it was a simple install. Another thing they mention is that you only need to pull the trim back a little bit but your best bet is to pull the entire trim off of both passenger and driver side so you can efficiently reach the taillight housing connectors or your wrists and arms will be squeezed from the tight space between the plastic trim.. You don’t need to have much knowledge in electrical wiring to be able to figure the installation out considering you just have to plug in the connectors in the taillight housing where they go. It’s pretty user friendly. I definitely recommend this wiring harness kit.

Scritto da: Al

Only thing that took 1 star was installation instructions, otherwise this would have been a 5 star product

I got this for a Nissan Rogue 2016 (same install for 14-16) and the package contains everything you need for installation. It is also very easy to connect to the existing rear light connectors and explains how to remove the car panels to access the wires. The instructions included are extremely vague and you have to fill in the blanks... Also there's a video (a little more clarity there) on you tube. Just type the connector assy part number and it comes up. Two corrections to the instructions and video: 1.- they don't explain which connector goes to which side of the car.. The connector with the red wires goes to the driver side. The connector with the green wire goes to the passenger side. 2.- (the biggest thing) IGNORE the advise to run the included power wire down the gromet, under the car, into the hood and clamp to the battery... INSTEAD, There is an existing connector for constant power meant to be used by the dealer to install the tow hitch option. It's a small white connector with a blue and grey wire (two wires only) it's powered by the fuse location called "DEALER OPT" for which you have to add a 10 amp fuse (even though the fuse box says it's a 30 amp location). This connector is located behind the rear panel you have removed already on the driver side and taped to itself I would say half way up and about middle of the panel. The blue wire is not connected to anything. The grey wire is powered by the dealer opt fuse. Connect your power wire there instead and save the hassle of going under the car and in the engine compartment. Other than that installation is super easy provided you have a few tools to take the panels off and are careful not to put marks on the plastic parts.

Scritto da: Maxim D.

Went on without a hitch ????

I have no automotive experience and I could say that with the installation videos available online and the comments here, this was easy peesy. Get yourself a cheap trim removal kit on amazon and terminal crimper. Like other comments have mentioned, Nissan most likely has already prewired the car to make it hitch ready. The wires are light brown and blue on the driver side and come with a connector attached. All I did was crimp a male spade terminal and plug it into the connector that is already there. The rest is plug and play!

Scritto da: ANDRE

Easy to install look like the one at dealer

Great product

Scritto da: RWC

Works well

Installed easily on my 2011 Nissan Rogue SV and appears to work well. The written instructions were lean, so vehicle specific installation videos from both Curt and Etrailer helped greatly. On my vehicle at least, it wasn't necessary to run a power lead up to the battery, as the car already was prewired. Just popped a 10 amp fuse in the engine compartment fuse holder (slot marked trailer) and tapped into the feed at the rear of the car.

Scritto da: A.G.

Item is as described

This item fit the car perfectly and works great. It takes a bit to install it which is the only setback

Scritto da: Eric Veen

So thankful for others reviews!

Worth checking out if you're rogue is prewired! As seen in the photo [drivers side in behind the panel (can reach this from the compartment door that opens just for checking - look top right)], another review told me to look for this and I am so THANKFUL! All I needed was to put a 10amp fuse in the dealer opt spot under the hood (friendly mechanic at Nissan verified this for me too) and the brown wire had power! All I needed to do was connect the black wire to it. Saved so much hassle of trying to run a wire to the engine battery! Product installed so easily - great YouTube videos by CURT for the installation of their products!