CURT 55513 Cablaggio rimorchio personalizzato a 4 pin lato veicolo, selezionare Toyota Tacoma, T100, Hilux, nero

Brand:CURT

3.8/5

89.43

Se il tuo veicolo non è dotato di cablaggio per il traino di un rimorchio, il cablaggio personalizzato CURT è la soluzione ideale. Un cablaggio personalizzato, chiamato anche connettore a T, è un semplice dispositivo elettrico plug-and-play che si collega al sistema elettrico dell'auto e fornisce una connessione di cablaggio del rimorchio standard e universale. Questo viene fatto utilizzando due o più connettori specifici per il veicolo e compatibili con l'OEM da inserire nel gruppo fanale posteriore, eliminando la necessità di tagliare, giuntare e saldare durante l'installazione. I cablaggi personalizzati sono realizzati in modo specifico per il veicolo e, sebbene non siano disponibili per tutti i veicoli, offrono uno dei modi più rapidi, semplici e sicuri per cablare un veicolo per il traino. Questo particolare cablaggio plug-in fornisce una presa per connettore piatto a 4 vie ed è progettato per essere un cablaggio personalizzato per adattarsi a determinati anni di Toyota Tacoma, T100 e Hilux (per verificare la compatibilità del veicolo, vedere le informazioni sull'applicazione). Viene fornito con tutti i componenti di cablaggio necessari per stabilire un collegamento affidabile del cablaggio del rimorchio, nonché una copertura antipolvere per mantenere pulito il connettore quando non viene utilizzato. Hai in mente un'immagine della tua prossima destinazione: forse è la barca che approda nel tuo punto di pesca preferito, forse è un campeggio che si affaccia su uno dei capolavori della natura, o forse è il prossimo grande cantiere. Tuttavia, trasformare quell'immagine in realtà richiede molto più che sognare ad occhi aperti. Ci vuole una connessione solida e la giusta quantità di energia.

Prodotto non disponibile
COPERTURA POLVERE. Per promuovere un uso duraturo e la resistenza agli agenti atmosferici, questo cablaggio per illuminazione a 4 poli per rimorchio viene fornito con una copertura antipolvere in gomma. Si adatta facilmente al connettore piatto a 4 vie quando non viene utilizzato, proteggendolo dagli elementi esterni. POTENZA AFFIDABILE. Questo cablaggio del rimorchio a 4 vie è realizzato con tecnologia a montaggio superficiale. Questo tipo di circuito genera meno calore, intensità della luce ottimale e prestazioni durevoli. SPECIFICO DEL VEICOLO. Questo cablaggio aftermarket per veicolo-rimorchio è progettato per anni selezionati di Toyota Tacoma, T100 e Hilux. CONNETTORE STANDARD. Questo cablaggio plug-in per rimorchio a 4 piatti può essere utilizzato per collegare le luci posteriori del rimorchio, le luci di segnalazione dei freni e gli indicatori di direzione. Il cablaggio della luce del rimorchio a 4 vie è popolare su una varietà di rimorchi, aggiungendo opzioni di traino versatili per il tuo veicolo. FACILE DA INSTALLARE. Nessun taglio! Nessuna giunzione! Questo kit di cablaggio del rimorchio si collega al cablaggio di fabbrica esistente sul veicolo e lo dota di un connettore di cablaggio del rimorchio a 4 pin posteriore standard per il collegamento e il traino di un rimorchio.
Brand CURT
Brand ‎CURT
Customer Reviews 4.7 4.7 out of 5 stars 1,008 ratings 4.7 out of 5 stars
Exterior ‎Machined
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 4 x 3 inches
Item model number ‎55513
Item Weight 0.91 Pounds
Item Weight ‎14.6 ounces
Manufacturer ‎CURT
Manufacturer Part Number ‎55513
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎55513
Product Dimensions ‎9 x 4 x 3 inches

3.8

13 Review
5 Star
84
4 Star
10
3 Star
4
2 Star
2
1 Star
2

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: MH
Easy install, good value
I’m not a mechanic, and this was still easy to install. Took no more than 30-45 minutes going slowly and methodically. Fits the Toyota Tacoma 2005-2015 perfectly and has worked well for me. Would recommend if you don’t want to splice wires.
Scritto da: Capt Jay
Easy Install
I would go for 5 stars, BUT the double sided patch they provided was all dried out and worthless. Ugh.. I had to jump through hoops to secure the module inside the twilight box.
Scritto da: Mustafa Al azzawi
Quality
It is really easy to install and very good for the value but the quality of the wiring not that good but overall I haven’t had an issue with it works well
Scritto da: Ian from the north
Easy install
Perfect fit 2014 Tacoma. Super easy to install and works great.
Scritto da: Jeffy T
Doesn’t get much easier than this!
Clean off some paint, drive a self tapper in for ground, zip tie the slack, plug and play from there! I HATE cutting factory wiring, this was the answer!
Scritto da: Atmosfera
OEM quality
I loved how easy to install this harness was. It is now installed into a Mexican Toyota Hilux 2017. Every connector fits without a problem. The instructions on how to replace it are great. My recommendation is for you to get a tester to keep in the truck for future usage. It only adds a couple of dollars to the setup. Great product!!
Scritto da: DownTown
Install was a breeze
Watched YouTube video on the install and it was very easy. 20 min and I was done.
Scritto da: Tranche
Perfect!
Installed on a 2014 Tacoma after waiting approx. 1 month for Curt to confirm (in their application chart) that the T-Connector for the 2013 Tacoma also fits the 2014. It does! And the quality of this harness is first rate, including the connectors which appear to be identical to the Toyota OEM. Just a few suggestions to improve the installation experience: First, there's really no need to drill a hole to attach the ring terminal ground. Inside the left tail-light housing, there are 3-4 machine screws (ends) attaching the metal housing to the truck body. You need only use one to attach the ring terminal; I used the upper right with a nut and lock washer I supplied. I tested this ground location with a meter and found that it's solid. No drilling. A second suggestion would be to add wire conduit to all three branches of the T. While not required, I believe this upgrade improves the integrity (and certainly the protection) of the wiring and conforms with the OEM wiring in the vicinity of the T-Connector. If you do install conduit, do this BEFORE you plug in and route your wiring. Much easier this way. You'll need approx. 10 ft. of 3/8" or 1/2" split seam conduit; I used Dorman #86651 @ $6 (approx.). Seal conduit ends with electrical tape. Finally, as this T-Connector supplies a flat-4 connector to the trailer, I suggest that you include the Curt 58001 bracket to attach this connector to your receiver tube. It's inexpensive and fits perfectly. 7/28/14 Edit. While I certainly maintain my 5-star rating of this T-Connector, I've found that, over time (6 mos.), one minor flaw presents. The double-sided adhesive strip that's intended to hold the converter box in place loses its adhesive holding power. No worries; the fix is easy: Just replace with similar sized "industrial strength" Velcro. (I recommend 3M Dual-Lok. Very strong and inexpensive.) Cover the entire back of the box with the Velcro and attach to a (preferably) smooth and clean vertical sheet metal surface. (I had no trouble finding this.) If I were on the Product Development Team at Curt, I'd recommend a redesign of the box to include two (2) mounting ears through which sheet metal screws could be used to attach the box -- again, to a non-structural non-frame vertical surface.
Scritto da: canuk54
Fit perfectly on a 2010 Tacoma
This replaced one installed incorrectly by a nearby Truck and Van shop. It was very easy to install, less than twenty minutes from start to finish and works great. It has been installed for 5 months through rain etc with no issues. The last one was installed with the box below the truck bed, making it open to the elements and it didn't last through a Canadian winter before shorting out the brake lights and causing me to not be able to put my truck into gear. After being towed to a garage and having the cause pinpointed to the incorrectly installed trailer wiring, which was removed, all was good. This unit was recommended to me by the repair garage.
Scritto da: R. B. Clarke
Liike original equipment
Name brand and really good instructions Took about 20 minutes and looks like an OEM product which I think it is Solid construction, and only had to drill one small hole for the ground wire , screw incldued Worked like a charm
Scritto da: Amazon Customer
Works perfect.
Super easy to install. Works perfect for my trailer
Scritto da: Chris B
Easy to install
Easy to install, put on a Tacoma that’s always pulling boats out of the water. Holds up no problem
Scritto da: Jarett Miles
easy to install
Quality product, easy to install.

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart