Clacson nascosto Marinco 11095 12V, OEM

Brand:Marinco

3.5/5

56.05

DESCRIZIONE DEL PRODOTTO Le trombe nascoste Drop-In di AFI combinano una serie di caratteristiche desiderate in un'unica unità, tra cui: semplice installazione drop-in, elegante griglia a scatto con tessuto resistente all'acqua, autentico suono marino e retrofit post-vendita facile da installare. AMAZON.COM Producendo un suono marino tradizionale, questo clacson da barca presenta un design nascosto e drop-in ed è realizzato da AFI, l'inventore dei primi clacson da barca sottocoperta. L'elegante griglia del clacson, venduta separatamente, sfoggia un tessuto resistente all'acqua e si aggancia per una facile installazione. Il clacson si monta dall'esterno. Specifiche * Requisiti di spazio interno: 2 1/4 pollici di altezza per 3 5/8 pollici di larghezza per 3 1/2 pollici di profondità * Assorbimento massimo dell'amplificatore: 3 ampere * Valutazione DBA: 105 a 1 metro * Frequenza fondamentale: 440 +/- 20 hertz Informazioni su AFI Horns AFI è il principale fornitore di trombe per l'industria nautica, con oltre 50 anni di esperienza nella progettazione e produzione di dispositivi audio specifici per l'uso in ambienti marini difficili. L'acciaio inossidabile viene utilizzato per tutti i componenti critici come trombe, coperchio del motore, diaframmi e hardware di assemblaggio e montaggio. AFI offre una linea completa di trombe marine progettate per soddisfare quasi tutte le esigenze, tra cui trombe elettriche e ad aria compressa, trombe compatte, trombe elettriche e pneumatiche sottocoperta e una linea completa di trombe drop-in con un vasto assortimento di opzioni di griglia. Garanzia del produttore AFI garantisce che questo prodotto è esente da difetti di lavorazione o di materiali dalla data di acquisto per un periodo di un anno. A proposito di AFI AFI produce un'ampia varietà di prodotti che resistono all'ambiente marino punitivo. Ogni prodotto che realizza, dai robusti motori e bracci dei tergicristalli a una vasta gamma di avvisatori acustici per barche, scale e piattaforme da bagno, è progettato per resistere ai rigori della vita in mare. Anche la linea di mobili e accessori in teak dell'azienda è progettata per funzionare magnificamente sia in navigazione che in porto sicuro.

La griglia deve essere ordinata separatamente. Facile retrofit, si monta dall'esterno e la griglia del clacson si aggancia per una facile installazione. 12 V CC, assorbimento massimo dell'amplificatore: 3 Amp. Frequenza fondamentale: 440+/-20Hz. Classificazione dB(A): 105 dB a un metro. NOTA: Requisiti di spazio interno: 2,25 A x 3,625 L x 3,5 P.
Brand Marinco
Brand ‎Marinco
Brand Name ‎Marinco
Color Chrome
Color ‎Chrome
Customer Reviews 4.4 4.4 out of 5 stars 746 ratings 4.4 out of 5 stars
Fit Type Universal Fit
Fit Type ‎Universal Fit
Item Package Dimensions L x W x H ‎7.4 x 6.69 x 3.31 inches
Manufacturer ‎Marinco
Noise Level ‎105 dB
Package Weight ‎0.31 Kilograms
Part Number ‎11095
Size ‎Small
Sport Type ‎Boating
Style Drop-in Without Grill
Style ‎Drop-in Without Grill
Voltage 12 Volts
Voltage ‎12 Volts

3.5

13 Review
5 Star
70
4 Star
16
3 Star
6
2 Star
3
1 Star
5

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Dustin Saiger
Perfect replacement for rusted out horn
My 2016 Robalo Cayman 223 had the horn stop working suddenly. Opened it up, and the horn was a pile of rust failing apart. Ordered this and literally within 15 minutes had the horn swapped and works perfectly. Direct replacement for any bow mounted oval horn with a white or stainless grill. Fit perfectly and two wires just like the factory one. Loudness is about on par as OEM one. Great replacement.
Scritto da: Chris B.
Perfect replacement for stock horn
Bought a used 2005 Bayliner 205 and the horn was not working. This was an was replacement, pry off the cover and three screws and a power plug later our horn is back to working! Have only used for one season so not able to speak to it's longevity but works perfectly so far.
Scritto da: Tracer800
Purchase to replace the same unit that is 14 years old
Direct replacement for the weak one i pulled out of my boat (AFI Model L horn). The unit tested good prior to install in as loud for its size. No Extra modification to mounting holes - direct fit / 14 years later.!!! Did add small piece of window screen material between the cover plate and the horn to prevent insects from building nests (wasps, etc.) in the body of the horn This unit does not come with the White, Black or Aluminum covers. So make sure you keep that from your old unit if you replace it with this one.
Scritto da: sswallow
Worked, but will not hold up over time
Installed this device because it was a drop in for my old one. By the end of the summer it was already dead. Did not hold up to normal use in the ocean. You get what you pay for in this case.
Scritto da: Joe Desanti
Good value
Great option for replacing OEM horn.
Scritto da: GREGORY TEDESCO
Ok
Ok
Scritto da: SunshineStateJG
Easy to install & worked 1st time
This was purchased as a replacement for original horn on 2006 Bayliner. It was an easy fit and worked 1st time. Only niggling aspect is that the original white plastic horn cover did not "Click" back into place on the new horn,(as it had on original horn). So I had to add some adhesive on each of the three locking clips and so far the cover is still holding tight.
Scritto da: Tony. Tente
Great product
Love this horn it was delivered on time highly recommend this product easy to install
Scritto da: Jerry Haggarty
Perfect and as described
Installed it in my 20 runabout boat. Looks great, works awesome.
Scritto da: john chernyk
Factory replacement
Fit perfect I recommend this product !
Scritto da: RT
focntionne très bien
fonctionne très bien.
Scritto da: Erin C Gallant
Good Replacement of Model L Horn for Bayliner 2052 Cuddy Boat
Does not come with grate cover/grill which is odd since there is likely a leak in the original cover plate/grill/thin plastic that caused the original failure. The horn itself is like 3-5mm larger in diameter than the original (plate is teh same though) which made the screw holes shift over to the one side since the side of the horn was hitting the plywood inside the anchor bay. A little shave of the plywood with a drill bit on the inside of the anchor bay allowed the plate holes to line up with the original holes making it a seamless swap. Took approx 5-10 mins to pull out the oldhorn, shave the inner plywood a bit and replace with this horn.
Scritto da: RGB
It’s nice and loud looks good
My boat horn was old and not working this was the replacement model style put it in works like hot damn

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart