CHIAVE A INGRANAGGI 3 pz. Set di barre di leva di indicizzazione 8", 10" e 16" - 82301D Kit da 3 pezzi

Brand:GEARWRENCH

3.7/5

€
152.56

DESCRIZIONE DEL PRODOTTO Chiave per ingranaggi Chiave a cricchetto combinata con raggio a X flessibile da 19 mm. L'estremità della scatola a cricchetto richiede solo 5 gradi per spostare un dispositivo di fissaggio rispetto ai 30 gradi per le chiavi a scatola standard. Migliore resistenza dell'estremità della scatola. Il design dell'unità di superficie riduce l'arrotondamento del dispositivo di fissaggio. La testa flessibile sull'estremità della chiave fornisce angoli multipli per migliori distanze in spazi ristretti. L'estremità aperta della chiave è dotata di trasmissione superficiale della chiave a ingranaggi, che riduce l'arrotondamento degli elementi di fissaggio e fornisce il 25 percento in più di coppia. Il design del raggio a X del modello lungo fornisce una coppia notevolmente maggiore e riduce l'affaticamento della mano. Finitura nichel-cromo lucido DAL PRODUTTORE Chiave per ingranaggi Set di 3 pezzi di leva di leva composto da: 82208 leva di leva di indicizzazione da 8 pollici - profilo liscio, 82210 leva di leva di indicizzazione da 10 pollici - profilo liscio e 82216 leva di leva di indicizzazione da 16 pollici - profilo liscio. Le barre di leva per chiavi a ingranaggi sono indicizzabili a 180 gradi per una maggiore leva con 14 posizioni di bloccaggio per un accesso senza pari. Il manico lungo ti consente di posizionare la barra dove ti serve per una migliore leva. La costruzione industriale in acciaio supera i requisiti ANSI per la resistenza fornita.

Prodotto non disponibile

EAN: 0099575823015

Categories: Strumenti e miglioramento della casa, Utensili elettrici e manuali, Utensili manuali, Barre di leva,

Progettato per la demolizione, il riposizionamento di attrezzature, il lavoro industriale, l'allineamento di componenti in acciaio o lo spostamento di motori. Il profilo liscio della testa si adatta alle aree di accesso ribassato, rendendo rapido il lavoro di leva in aree ristrette. Il design compatto consente di lavorare in spazi ristretti. Le teste ruotano di 180° attraverso 14 posizioni di bloccaggio per un accesso e una leva senza pari. I set di barre di leva di indicizzazione di Gearwrench offrono una varietà di dimensioni in grado di raggiungere aree inaccessibili a uno strumento a testa fissa per un migliore accesso.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	GEARWRENCH
Brand	‎GEARWRENCH
Color	Multi
Color	‎Multi
Customer Reviews	4.6 4.6 out of 5 stars 1,726 ratings 4.6 out of 5 stars
Finish	‎Black Phosphate
Finish Type	‎Black Phosphate
Head Style	‎Open End
Included Components	‎3
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	18.8 x 6.2 x 6.2 inches
Item Dimensions LxWxH	‎18.8 x 6.2 x 6.2 inches
Item model number	‎82301D
Item Package Quantity	‎1
Item Weight	4.33 Pounds
Item Weight	‎4.33 Pounds
Manufacturer	‎GearWrench
Material	Stainless Steel
Material	‎Stainless Steel
Measurement System	‎English/Standard
Operation Mode	‎Mechanical
Part Number	‎Drake Off Road Tools
Product Dimensions	‎18.8 x 6.2 x 6.2 inches
Size	‎One Size
Style	‎3-piece kit

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Amazon Customer

A good set

Nice tools, there is some play in the adjustable head. The tips are thin and can get in between a fairly small opening. I used them recently to remove the head off of a hydraulic cylinder. I had to use a chisel and hammer to start the separation but after a few taps I was able to get the pry bar in and it was game on. I would recommend these, just remember they're not made to move the world.

Scritto da: Anthony S

Nice bars

Nice bars, feel good in the hand, Heads are a little sloppy for a pry bar. I would recommend buying new, I got the used like new option and saved $9. I should have got me because these are not “like new” they look clearly used, finish has deep scratches that look touched up, and look like they were cleaned with breaker parts cleaner because the overall finish is hazed over. Might return and get new, for as little use as they’ll get it will bother me for the finish to be so poor for only $9 bucks off.

Scritto da: Hals17

Absolute game changer. Buy them and don't look back.

There's a bit of play in the head but they have held up exceptionally well. If you've never gotten a set of these, do it now and don't look back. They are an absolute must have. I don't touch any of my other pry bars 99.99 percent of the time.

Scritto da: H. Ault

Latches can be stiff

The first set of these had one (the long one) that wouldn't unlatch to change the angle of the head; the two shorter bars unlatched and swung freely with ease. I had to return the entire set in order to get the bad one replaced, and in the second set, one of the heads unlatched and would swing freely, and two unlatched and were just slightly sticky at the detent points; I can live with that. Apparently, this must be a fairly common issue. Maybe they'll ease up with usage.

Scritto da: Axel Storwick

Great tool, know it’s limitations

Great for prying in weird areas. Know the limitations, they aren’t gonna last with a 200 lb gorilla reefing on the end of it

Scritto da: Keith Hazlewood

Awesome tool

Great pry bars , good in hard to reach areas

Scritto da: JEFFREY H.

A tried and true TOUGH pry bar!! Love this thing!!

Mobile diesel mechanic for heavy equipment and fire trucks. I purchased my original pry bar about 10 years ago. The index mechanism finally failed on it. And it was probably my fault!! These things are GREAT!! Need a pry bar to put some pressure on something but can't quite find the one pry bar that has the right angle??!! This is it!! Push the button and change the angle and you can usually get it!! And they take the torque you can apply to the handle. I'm 6'5" and 250lbs. Both hands on the pry bar and my feet squarely supported for leverage and these haven't failed when I've been pulling all of my weight and then some on them. You do need to make sure that the button for indexing them is fully out when you use them. And every so often unscrew the retaining button with an allen wrench, take it apart and clean it out (yes, they do get dirty inside and need a little TLC every so often) and give it some oil. I purchased 2 more because every so often you need that extra pry bar with that certain angle to get the job done. These are great, awesome, and tough!!

Scritto da: Christopher England

These are pretty okay

I'm not as crazy about the GearWrench brand as a lot of Amazon reviewers appear to be. They do make pretty good mid-price tools, and these pry bars are no exception. I find them to be pretty useful. I'll dock a star because they aren't perfect. They could have a longer "beak." I'm not crazy about the grip. I haven't had too much trouble with breakage that others have had, and I've been pretty tough on them. I appreciate these pry bars and use them a lot.

Scritto da: connor

Expensive but good tool!

I have used this for a number of different things and found it useful, it is expensive but feels sturdy and the indexing head works well!

Scritto da: Rob

Great tool, but buy Gearwrench from the store not amazon

Works great. I'll be looking to buy the smaller ones now i have seen how versatile these are. I actually used this 24 inch one for prying coil packs out recently (gently of course, and hence the need for smaller ones). The only criticism would be the finish seems a little rough around the edges, and can be sometimes a fiddle to get the button to press in. Buying from amazon thinking it would be the cheapest was also a mistake. Gearwrench is often cheaper from online and in store tool resellers that can actually warrant the item too.

Scritto da: Don

A little pricey but good quality

The 16” is the better buy as it gives more leverage. So far has performed perfectly.

Scritto da: Chad

Easily broke the pivot lock the fist time I pulled ...

Easily broke the pivot lock the fist time I pulled hard on all the gear wrench pry bars I bought. I have snap on and westward ones now that I can easily pull much harder on without them failing. These are good if your company has tool replacement ;-)

Scritto da: Matthew c Rousu

Excellent quality

The tool I have been missing for 20 years.