Budge B-1220-X9 1200 Denier Hard Top/T-Top Telo copribarca blu 27'-28' di lunghezza (larghezza trave fino a 106") Telo copribarca impermeabile, resistente, resistente ai raggi UV 27'-28' di lunghezza (larghezza trave fino A 106") Blu

Brand:Budge

3.6/5

€
1189.12

Le coperture per barche Budge Sportsman 1200 denari, B-1220-X9 forniscono protezione per tutte le intemperie per la tua barca Hard / T-Top. Realizzato in poliestere 1200 denari tessuto a macchina in grado di resistere a forti piogge, venti e altre forze dannose della natura, difende anche la tua barca da sole, pioggia, neve, sporco, polvere, linfa degli alberi, foglie che cadono, escrementi di uccelli, polline e altro ancora. Le cuciture rinforzate e le prese d'aria delle tasche cucite tengono fuori l'umidità, consentendo alla condensa di fuoriuscire rapidamente. Ciò mantiene asciutto l'interno della tua barca. La copertura è dotata di un orlo elastico e di un sistema di cinghie superiore e inferiore, che la mantiene sicura e la rende eccezionalmente resistente durante il rimorchio. Questa copertura per barche si adatta a barche rigide/T-Top lunghe 27'-28' (324-336), larghezza trave fino a 106.

Quantity

Aggiungi al carrello Compra subito

EAN: 0018397118727

Categories: Sport e tempo libero, Sport e forma fisica, Canottaggio e vela, Barche e attrezzature, Coperture per barche,

Le nostre coperture non si adattano a motori fuoribordo o torri da sci. MISURA PER ADATTARSI: La nostra copertura per barche Budge 1200 denari dal design personalizzato si adatta alle barche Hard Top / T-Top. Questa copertura per barche si adatta a barche Hard Top / T-Top da 27'-28' (324-336) di lunghezza, larghezza della trave fino a 106. PROGETTATO PER RIMANERE SICURO: Il nostro orlo elasticizzato, le cinghie e le fibbie cucite in alto e in basso mantengono la copertura in posizione. Ottimo per l'uso su rimorchio e lo stoccaggio all'aperto. IMPERMEABILE DENTRO E FUORI: le cuciture rinforzate e impermeabili tengono fuori l'umidità. Le prese d'aria cucite evitano l'accumulo di condensa. PROTEZIONE DAGLI ELEMENTI: Realizzato in poliestere 1200 denari impermeabile al 100%, abbastanza forte da proteggere la tua barca da pioggia, neve, sporco, polvere, linfa degli alberi, foglie, polline, escrementi di uccelli e altro ancora. L'eccellente protezione dai raggi UV impedisce alla tappezzeria di sbiadire.

Brand	Budge
Brand	‎Budge
Color	Blue
Color	‎Blue
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 412 ratings 4.5 out of 5 stars
Fit Type	Universal Fit
Fit Type	‎Universal Fit
Item Dimensions LxWxH	336 x 106 inches
Item Dimensions LxWxH	‎336 x 106 inches
Item model number	‎B-1220-X9
Item Weight	‎41.5 pounds
Manufacturer	‎Budge
Manufacturer Part Number	‎B-1220-X9
Material	Polyester
Material	‎Polyester
Model	‎B-1220-X9
Ultraviolet Light Protection	Yes
Ultraviolet Light Protection	‎Yes
Vehicle Service Type	Personal Watercraft
Vehicle Service Type	‎Personal Watercraft
Water Resistance Level	Waterproof
Water Resistance Level	‎Waterproof

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: mary r hare

Appears to be heavy duty and a fair price.

Pictures show the 1220x9 cover on a 1992 Morgan 250 Gulfstream, cover is for a 27-28 foot boat, mine registered as a 25 foot T-Top so there are one foot openings on both sides at Capt seat area and plenty left over in the bow area, this is the largest cover I could find in the $500 price range with a 5 year warranty, just received on March of 2023 so I will update on durability in a year or so.

Scritto da: Tad J. Skawinski Sr.

Great value over shrink wrap.

Bought this cover for my 2025 Mako 25.5 Center consul that has a pulpit. Could not see spending the same amount of money for shrink wrapping the boat one time. Extremally happy with the fit and quality of the cover.

Scritto da: Amazon Customer

Seemingly well made nice fit

This is my first year using this cover, so I’m not sure if it’s durability yet. It seems to be well enough made to at least get through a few New England winters. We’ll see! If I can reuse it even 2 seasons, it will be a bargain. Great fit on my 24 ft hardtop and it hasn’t blow away yet. Overall, I’m very happy with it so far. I can tell it’s going to be better than rewrapping with plastic over time.

Scritto da: Gary A

I'm hoping to say Goodbye to shrink wrapping

In the past, I have used a service to shrink wrapped my boat for the winter. This year, that service completely flaked, leaving my boat uncovered for months. During a search for boat motor covers, I stumbled across this boat cover. It seemed like the perfect solution and I'm at a loss as to why I didn't think about this option before. I recently installed it on my 26 foot Sea Sport and it fit better than expected! The cover seems well-made from durable material with a strong, bungee-like material around the entire perimeter. And the cost of this cover is less than one shrink wrapping service. Needless to say, I have deleted the shrink wrapping company from my contacts.

Scritto da: Lynn M

Great boat cover

I ordered this cover for winter storage for my boat. I am glad I ordered one a bit longer than my boat measurements to ensure coverage for both outboard motors and the bowsprit. The fabric is very sturdy with reinforced seams and venting for wet winters we have here in Washington. The tie-down straps are also sturdy with reinforcement where they are attached to the cover fabric. So far the cover has withstood both rain and snow. I am very pleased with this purchase.

Scritto da: Frank

3 days from new and I just reduced a star. Several quality bugs.

I have installed new 3 days ago and seam tape is falling off everywhere. I reduced my rate by 1 star today. I have a new 24ft Carolina Skiff Ultra Elite with hard T-top and chose this cover to protect it. Received it in a large box. I didn't see any warning but do note Do Not use a razor to open or you will probably cut into bag and cover since no packaging around cover. I was careful no problems. It's a Heavy cover but expected for size and thickness. On first install I found the interior has a rubber membrane that is a bit sticky to the gel coat so henders the adjustment but then once in place it helps hold that spot and shouldn't cause wear marks from friction continuous movement in the wind. On my 8 foot beam I found it is shortest to drape down the sides at the back of the t-top which is the widest area of the t-top and this only leaves about 10 inches to cover the sides so color Gel Coat is still exposed to the sun. The front is designed a bit more for a sharp point boat so it left a baggy area where water can stand. I loosened the crank strap and I had just enough room to tuck the cover between the bow eye and roller then cinched the strap back. This does cover the outboard head unit and most of the middle section. Overall it's expensive but a decent cover. Still new so I'll change rating later as it ages. NEGATIVES the seam tape seems to be easily distributed and the rear over the engine head was pealing off on the day first installed. This absolutely caused leaking as we had a bad rain storm that night and the towl I used to protect he engine hood from possible chaffing was soaked from that rain. I have some vinyl seam tape that should fix this. Shouldn't have to on a new cover but I need the cover now. See photo for tape release. Once it starts it easily peels lose farther and father. Also their are a lot of loose strings hanging out of the outer seams that I will need to carefully trim up. Lastly, the straps are plenty long but they are designed to clip port side and pull under hull to clip Starboard side. This will be near impossible once the boat goes on my lift so I'll need to find new straps. I'll add additional photos soon.

Scritto da: Sean

So far so good

Really happy with this boat cover. My boat is 27 feet long and 8.5 feet wide and this works perfectly. After a couple years it will pay for itself since I do not have to do shrink wrap anymore.

Scritto da: steve

Surprised

I was pleasantly surprised after purchasing. Other covers of supposed better quality are selling for twice the cost of this one. This cover is built really well, the material is waterproof and the quality is amazing. I’d recommend.

Scritto da: JPA

Well designed & well made

I chose to go with this version in 1200 denier cloth. It’s heavy, but once it’s on that’s a good thing. I was impressed with the design, heavy taped seams in the right places, covers for the clips, vents, strong elastic cord on the bottom edge, and even a swatch of fabric for future repairs. I was really impressed with how well it fit as my boat is a little different than most with a custom radar arch. Light rain beads up well on the fabric.

Scritto da: Ben E.

Fits my Cutwater 24 well!

Well made and good fit on the Cutwater 24 Coupe. Takes 2 people to install though.

Scritto da: C & BH

Fits well.

I was pleasantly surprised when the 1200 boat cover fit perfectly on my Rosborough RF18. I have a 50 Merc on the back and it covered that was well. I've only had it on for about a week so I can't yet comment on durability. What I can say is that the material seems robust and the elasticized bottom fits tight around the hull of the boat including the motor. The 5 straps are well positions and easy to connect and adjust. The strap guard, designed to protect the hull from potential chaffing from the plastic connectors, is a great design. So far so good!

Scritto da: Michael

Works Great-Built very strong

I ordered the 1200 fabric cover over the 600 and the seams are taped. Doesn't leak and I have a 2008 Stingray 250 CS mid size Cruiser, which it fits well. I wouldn't hesitate to recommend this large cover to you. It is keeping the sun and rain out and came in a large sleeping bag type package. Thicker fabric weights more but it is built very well and won't tear. If you're wondering if this cover is thick and built well-put your mind at ease...it is! Order it - you won't be disappointed! My boat is exactly 25 feet and this cover fits quite well - if your boat is longer than 26 feet though this might not work but is described as a 24 - 26 foot cover and that is correct. I can leave my full Bimini top up and it covers no problem!

Scritto da: C.T.

Great cover fit my 235 Robalo hard top perfectly .

This is a very good boat cover. Easy to fit in place. Covered the boat from bow pulpit to and including the outboard engine. The cover was shipped inside a carry bag that was inside a rather light weight cardboard box....the box was in tatters and had been re-taped in transit. I would recommend doubling the cardboard for shipping. The first cover I ordered was returned UNDELIVERABLE I suspect because of box failure. I am very impressed with the cover and that's the bottom line!