0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

Broan- NuTone BCDF130SS Cappa da cucina convertibile Glacier Aspiratore leggero per sottopensile in acciaio inossidabile, 375 Max Blower CFM, cappa da 30 pollici in acciaio inossidabile da 30 pollici

Brand:Broan-NuTone

3.5/5

€
592.94

Aggiorna la tua cucina con la cappa convertibile sottopensile Broan-NuTone Glacier da 30 pollici! Questo versatile inserto per cappa da cucina offre una soluzione completa alle vostre esigenze di ventilazione fornendo sia una ventola di scarico che una plafoniera per la vostra stufa. Questa cappa offre prestazioni di ventilazione MAX 375 CFM e 5,5 Sones per rimuovere rapidamente fumo e odori di cucina dall'aria, e il controllo capacitivo tap-touch a 3 velocità consente regolazioni rapide della ventola e fornisce il livello di ventilazione ideale ogni volta che cucini. Dispone inoltre del sistema Captur, un design avanzato del soffiatore con un ingresso centrico posizionato in avanti per rimuovere più velocemente il 97,4% di fumo e odori. I luminosi moduli LED a 2 livelli illuminano uniformemente la tua zona cottura e sono anche controllati da un pulsante tap-touch per facilità d'uso. Questa elegante cappa in acciaio inossidabile si adatta perfettamente sotto gli armadietti e presenta lati squadrati e un fondo orlato senza spigoli vivi per garantire la sicurezza e fornire un aspetto più decorativo. I due filtri micro-mesh monopezzo lavabili in lavastoviglie con promemoria per la pulizia del filtro in modo da poter mantenere una cattura ottimale del grasso e mantenere la cucina ventilata. Questa cappa da cucina convertibile a 4 vie misura 19,625 x 30 x 6 e si installa come apertura canalizzata 3,25 x 10 collegata verticalmente o orizzontalmente con serranda, 7 condotti verticali rotondi (serranda venduta separatamente) o come non canalizzata con ricircolo dell'aria (filtro venduto separatamente) per fornire opzioni di installazione versatili almeno 18 sopra il piano cottura. Include feritoie nascoste sulla parte superiore della cappa che si scaricano lontano dai mobili. Può funzionare anche in un'applicazione conforme ad ADA. È sia certificato UL che HVI-2100 per la sicurezza e la protezione e include una garanzia limitata di 1 anno e una garanzia limitata di 3 anni sul modulo LED. Migliora la tua cucina con la cappa Broan-NuTone BCDF130SS!

Quantity
Aggiungi al carrelloCompra subito

EAN: 0026715240500

Categories: Elettrodomestici, Cucine, forni e piani cottura, Cappe da cucina,

INSTALLAZIONE CONVERTIBILE A 4 VIE: Si installa come condotto verticale o orizzontale 3,25 x 10 con serranda, 7 condotti verticali rotondi (serranda venduta separatamente) o non canalizzato con ricircolo dell'aria (filtro venduto separatamente) per fornire un'installazione versatile. FILTRO LAVABILE IN LAVASTOVIGLIE: Doppio filtro micro-mesh lavabile in lavastoviglie con promemoria per la pulizia del filtro per aiutare a mantenere una cattura ottimale del grasso. ILLUMINAZIONE A LED INTEGRATA: dotata di moduli LED luminosi a 2 livelli per illuminare uniformemente la zona di cottura, controllati da un pulsante tap-touch per facilità d'uso. MIGLIORA LA QUALITÀ DELL'ARIA IN CUCINA: il sistema Captur fornisce prestazioni MAX 375 CFM e 5,5 Sones per rimuovere più velocemente il 97,4% di fumo e odori di cucina dall'aria e il controllo tap-touch consente regolazioni rapide. INSERTO PER CAPPA DA 30 POLLICI SOTTO ARMADIO: Si adatta perfettamente sotto gli armadietti per offrire una soluzione completa alle esigenze di ventilazione della tua cucina fornendo sia una ventola di scarico che una luce dall'alto.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Broan-NuTone
Brand Name ‎Broan-NuTone
Color Stainless Steel
Color ‎Stainless Steel
Control Console ‎Touch
Customer Reviews 4.5 4.5 out of 5 stars 631 ratings 4.5 out of 5 stars
Finish Type Stainless Steel
Included Components ‎Range Hood, Appliance Parts & Accessories
Installation Type ‎Under Cabinet Mount
Is Discontinued By Manufacturer ‎No
Item model number ‎BCDF130SS
Item Weight ‎18.4 pounds
Manufacturer Warranty ‎1 year limited warranty
Material Type ‎Stainless Steel
Model Info ‎BCDF130SS
Noise ‎1.5 Sones
Part Number ‎BCDF130SS
Product Dimensions 19.63"D x 30"W x 6"H
Product Dimensions ‎19.63 x 6 x 30 inches
Special Feature Stainless Steel,Led Lighting,Integrated
Special Features ‎Stainless Steel,Led Lighting,Integrated
Voltage ‎120 Volts

3.5

8 Review
5 Star
71
4 Star
18
3 Star
4
2 Star
2
1 Star
5

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Larry Marvin Wall
Not as quiet as advertised and installation isn't trivial but it looks pretty good...
I bought this to replace an existing Broan range hood in our kitchen when we refaced our cabinets. It was the same height and width as the previous hood with the same type of duct so it looked like it could be swapped in easily. I did the installation myself and it wasn't very difficult but it also wasn't trivial. My previous hood was installed using the rear 3.25x10 rectangular duct. In order for this to work the ducts in the wall and the back of the hood have to line up within 1/4 of an inch. In my case, because I was working with an existing hole, they did not. I was able to modify the duct coupler on the back of the unit to move it down 1/4 of an inch to get everything to align. The instructions suggest that you use foil tape to seal up all the joints in the ductwork. On a horizontal installation like mine, this is impossible because the last joint is inside the wall. However, I was able to seal up the joints where the coupler met the back of the hood and all the unnecessary little holes added to the hood during manufacturing. Anyway just keep in mind you need foil tape to complete the installation. You'll also need a bushing (not provided) for where the electrical wire feeds through the back of the hood to protect the wire from the sharp metal edges and to be within code. The range hood that I was replacing was completely flat on top so it installed very flush with my cabinets. The new unit has these optional one-person installation brackets which introduce a number of 1/8" raised holes in the hood. The net result is that there is a 1/8" gap between the hood and the bottom of the cabinet above it regardless of how you install it. In our kitchen, with under-mount cabinet lighting, I could see light reflected off our light-colored backsplash and through this gap. It looked sloppy. I purchased 1/8" black foam weather stripping which I ran along the bottom of the cabinet to seal this gap and now it looks sharp. This hood can be installed in one of four different configurations. There are three ducted installations: 3.25x10 rear, 3.25x10 top, and 7" round top vent. Venting out the top will generally avoid the exact alignment and duct sealing problems that I mentioned but it means that you will lose some of your cabinet space. Apparently, the 7" round duct is the quietest and that is important because I did not find this unit to be that much quieter than the old unit that it replaced. On the lowest setting (which really doesn't move enough air for cooking anything) it makes more noise than my Bosch dishwasher but is quieter than my Microwave oven. You can talk over it on the medium setting (which does move enough air for cooking) but it still drives my wife crazy on the high setting and she won't use it. The final installation configuration is ductless which I would never do. The vent in the ductless configuration is on the top front of the unit where you mostly can't see it. However when you turn it on you would be blowing damp air right into your cabinet doors which would, I believe, eventually destroy them. Despite all these little gotchas, I got it installed and it looks very sharp and works well. The controls are unobtrusive and the lights are bright (they have two different settings). The bottom of the unit is also screened in so if you are sitting in a chair across the room and are looking up at it it looks nicely finished. I would buy it again.
Scritto da: John L Howell
Looks good
It loks good in te wood hood and operates very efficiently.
Scritto da: Story Lady
Not worth the price
I had purchased a different cooktop hood that was made much better than this one. Unfortunately, my installer ordered a square vent rather than a round vent. Apparently there was no round vent available in that model so I had to order a different cooktop hood. This one was $10 more, but did not offer the same conveniences of the other one. For instance, the filters in the hood are mesh design. Very hard to clean. The original vent had metal strips and the vents could be removed and washed. The other one also had hand motion sensors for the lights in the fan . This one doesn’t since it cost over $300. I think it should have been a little more high tech and better made!
Scritto da: Nathan
Nice system
I was doing a basic remodel and swapping everything to stainless. This is much more powerful and quieter
Scritto da: Ross V Ketchem
Nice looking unit.
Had this professionally installed and it looks great. Love the black stainless look and the LED lighting is bright and easy to use. Have only used the fan a few times but it offers plenty of suction and is very quiet.
Scritto da: Ohukno
Finally a nice range hood in black stainless!
I purchased this range hood to replace an old Broan range hood in stainless steel that had a broken bulb bracket and was always extremely difficult to access and change the bulb. It was probably 10+ years old and no longer matched in my kitchen with my new Frigidaire Gallery appliances in black stainless. I searched high and low for a mid-range hood that fit the bill and wouldn't be a huge hassle to install. I took some measurements, searched for those specifically and found this range hood. First off, I'd like to add some pros and cons. Pros: - absolutely stunning appearance. - Matches Frigidaire Gallery black stainless - Has flush LED nodule lights that are bright and efficient. - Fan is like 375 CF so it definitely has some good suction power but it relatively quiet. - Touch buttons add a hint of modernized look and feel to the range hood - screwing it up to the cabinet was pretty straightforward - has a few different options for different types ductwork and also a ductless option. - mesh grates are really nice looking, they don't remind you of steel wool like some of the others. They appear to be easy to clean and the finger cups are a nice touch that should make them easy to remove and put back up. Cons: - breakaway parts didn't break away easily. -screws and brackets were mounted inside kind of inconspicuous so it was difficult to find them initially - came with a duct insert "flapper" that didn't fit right, even though it was the right size. - Had a directional plate installed that was supposed to help divert the air and steam to the fan, but actually rubbed on the fan so badly that we thought the fan blades were bent or that the motor was broken. - LED lighting doesn't look like it would be easily accessible when it comes time to change them. - Not sure what or where you would order the LED replacement lights when they go bad, I hope they last a while because I have no idea still where to purchase, what to purchase, or how to change them out. Overall, I definitely think this range hood is worth it, while there were some installation issues that I noted in the cons section that almost made us dismantle and send it back, we were able to figure it out and it works flawlessly now. I'm very happy with the purchase and even happier with how well it matches my black stainless Frigidaire gallery appliances. My kitchen is now complete, thank you!
Scritto da: Amazon Customer
Overall good
Works great, not super loud, lights work well.
Scritto da: veteran
Satisfied
I love this new color, and when you turn the light or fan on, you can hear the range hood computer chip inside. It fit's perfectly, and goes perfect with my new range. What a beauty. Technology is wonderful.

Prodotti correlati

hot
KOBE Cappe da cucina INX2930SQBF-500-1 Cappa da incasso/da incasso, 30" 30" Cappe da cucina
3.6/5

€ 831.12

KOBE Cappe da cucina INX2930SQBF-500-1 Cappa da incasso/da incasso, 30" 30" Cappe da cucina
3.6/5

€ 831.12

hot
Ventilatore interno Broan-NuTone Elite per cappe aspiranti serie RMIP, MAX 850 CFM
3.9/5

€ 1081.67

Ventilatore interno Broan-NuTone Elite per cappe aspiranti serie RMIP, MAX 850 CFM
3.9/5

€ 1081.67

hot
Comfee Cappa da cucina in vetro curvo 36 pollici 450 CFM Rilevamento gesti a 3 velocità e pannello di controllo tattile Cucina in acciaio inossidabile Convertibile senza condotto/condotto con filtri deflettori e 2 luci LED (CVG36W9AST) Controllo rilevamento gesti 36 pollici
3.5/5

€ 832.01

Comfee Cappa da cucina in vetro curvo 36 pollici 450 CFM Rilevamento gesti a 3 velocità e pannello di controllo tattile Cucina in acciaio inossidabile Convertibile senza condotto/condotto con filtri deflettori e 2 luci LED (CVG36W9AST) Controllo rilevamento gesti 36 pollici
3.5/5

€ 832.01

hot
AKDY 36 pollici 343 CFM Cappa da cucina convertibile per montaggio a isola in acciaio inossidabile nero con luci
3.2/5

€ 1406.59

AKDY 36 pollici 343 CFM Cappa da cucina convertibile per montaggio a isola in acciaio inossidabile nero con luci
3.2/5

€ 1406.59

hot
Broan-NuTone BCDJ136SS Glacier Cappa da cucina convertibile a 4 vie sottopensile da 36 pollici con ventola di scarico a 3 velocità e luce, Glacier in acciaio inossidabile da 36 pollici
3.5/5

€ 935.49

Broan-NuTone BCDJ136SS Glacier Cappa da cucina convertibile a 4 vie sottopensile da 36 pollici con ventola di scarico a 3 velocità e luce, Glacier in acciaio inossidabile da 36 pollici
3.5/5

€ 935.49

hot
Comfee CVU30W4AST 30 pollici Sottopensile Condotto/Senza condotto Convertibile Sfiato sottile Filtro riutilizzabile da cucina in acciaio inossidabile resistente, Ventola di scarico a 3 velocità e 2 luci a LED Cappa aspirante, Versione 2.0 Ventola di scarico a 3 velocità Acciaio inossidabile 30 pollici
3.3/5

€ 288.42

Comfee CVU30W4AST 30 pollici Sottopensile Condotto/Senza condotto Convertibile Sfiato sottile Filtro riutilizzabile da cucina in acciaio inossidabile resistente, Ventola di scarico a 3 velocità e 2 luci a LED Cappa aspirante, Versione 2.0 Ventola di scarico a 3 velocità Acciaio inossidabile 30 pollici
3.3/5

€ 288.42

hot
Broan-NuTone BCSQ130SS Cappa sottopensile Glacier a tre velocità con luci a LED Compatibile con ADA, 1,5 Sones, 375 Max Blower CFM, 30", acciaio inossidabile
3.7/5

€ 584.69

Broan-NuTone BCSQ130SS Cappa sottopensile Glacier a tre velocità con luci a LED Compatibile con ADA, 1,5 Sones, 375 Max Blower CFM, 30", acciaio inossidabile
3.7/5

€ 584.69

hot
Comfee CVP36W6AST Cappa aspirante per montaggio a parete in acciaio inossidabile da 450 CFM canalizzata da 36 pollici con ventola di scarico a 3 velocità, filtri permanenti in alluminio a 5 strati, due luci a LED
3.1/5

€ 691.06

Comfee CVP36W6AST Cappa aspirante per montaggio a parete in acciaio inossidabile da 450 CFM canalizzata da 36 pollici con ventola di scarico a 3 velocità, filtri permanenti in alluminio a 5 strati, due luci a LED
3.1/5

€ 691.06

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu