BORA Portamate PM-5090 Supporto per rulli di alimentazione a piedistallo regolabile con rullo in acciaio con cuscinetti a sfera da 11-1/4"

Brand:Bora

3.6/5

126.01

Rullo in acciaio lucido Premium 11-1/4 (286 mm) - consente un'alimentazione regolare del materiale. Si ripiega per riporlo facilmente: l'ingombro ridotto quando ripiegato rende lo stoccaggio un gioco da ragazzi. Extra forte con una capacità di 150 libbre (68 kg): regge gli oggetti pesanti e rimane stabile, con una resistente finitura verniciata a polvere e piedini antiscivolo. Completamente regolabile: si regola da 27 a 43-3/4 (da 686 mm a 1,1 m), rendendolo ideale per seghe da tavolo, seghe a nastro e simili. Il supporto portatile perfetto: questo eccezionale supporto a rulli troverà impiego in tutto il tuo negozio per l'alimentazione di materiale e simili.

Rullo in acciaio lucido Premium 11-1/4 (286 mm) - consente un'alimentazione regolare del materiale. Si ripiega per riporlo facilmente: l'ingombro ridotto quando ripiegato rende lo stoccaggio un gioco da ragazzi. Extra forte con una capacità di 150 libbre (68 kg): regge gli oggetti pesanti e rimane stabile, con una resistente finitura verniciata a polvere e piedini antiscivolo. Completamente regolabile: si regola da 27 a 43-3/4 (da 686 mm a 1,1 m), rendendolo ideale per seghe da tavolo, seghe a nastro e simili. Il supporto portatile perfetto: questo eccezionale supporto a rulli troverà impiego in tutto il tuo negozio per l'alimentazione di materiale e simili.
Batteries Included? ‎No
Batteries Required? ‎No
Customer Reviews 4.5 4.5 out of 5 stars 366 ratings 4.5 out of 5 stars
Included Components ‎A-Frame Pedestal Roller Stand
Is Discontinued By Manufacturer ‎No
Item model number ‎PM-5090
Item Package Quantity ‎1
Item Weight ‎9 pounds
Manufacturer ‎PROOK
Material ‎Other
Measurement System ‎Metric
Part Number ‎PM-5090
Power Source ‎Crank
Product Dimensions ‎24 x 5 x 4 inches
Usage ‎Professional
Warranty Description ‎Manufacturer Warranty

3.6

12 Review
5 Star
75
4 Star
13
3 Star
6
2 Star
4
1 Star
3

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Bobby
Nice board holder upperer
I used this while cutting some 4x4 by 8 ft lumber with my miter saw. This device was great to hold up the long end of the 4x4 as I feed it into the miter saw.
Scritto da: ChasMo
Nice features, Versatile
Update 10/14/2020 After I wrote the review and the update below I was contacted by the company. They asked for my address and send me another unit. I assembled and tested it today. I does not have the "stiff" roller that made me think there were no ball bearings. Rather it looks like the first unit was binding up due to a tight fitting plastic bushing at the end of the roller. The other problem I had with the first unit was a failed weld joint on the nut the height adjustment handle screws into, see photo below. This one looks more secure. I'm upgrading my rating from 2 to 4 stars based on this and on the response from the vendor Original Review: This is advertised as a ball bearing roller but there are no ball bearings, just a metal rod through holes in the bracket. The rod does not turn in the roller. The result is a roller that does not turn freely. A little lube on the brackets will help but light weight material will probably just slide on the roller. This unit costs twice as much as others advertised. Lacking the ball bearings it is not worth the money. Update 08/17/2020 After a little use with re-sawing on band saw the nut holding the tightening lever twisted sideways on the pedestal. See the picture. A close look showed that it was only welded on one side. I bought this based on the reviews and thought that the high price indicated high quality. I was wrong. It is light weight and flimsy and poorly constructed. One I bought from Harbor Freight for a quarter of the price is stronger an better made. Does have a couple nice features though - an adjustable foot to compensate for uneven floors and a taper bar in the height adjustment which makes it easy to adjust.
Scritto da: boris karpman
Good design bad manufacturing
I like design/functionality of the stand so despite manufacturing defects i kept on returming/replacing. Ended up trying 4 of them and keeping 2. Three out of four stands were rocking after assembly. One out four hade cracked plastic cap on the leg.
Scritto da: Amazon Customer
Well worth the money.
Sturdy but light weight. Easy to use. Best I have used for a long time.
Scritto da: Mike
Every table saw needs this!
I am 73 years old and a dyi, landlord. I am making some cabinets and was having trouble holding and controlling long cuts. I decided to try this one and the price was good. I wish I had gotten it a long time ago. It is like having a helper when cutting long pieces. If you have a table saw, you really need this.
Scritto da: Karben
Way too much rocking!
When you tighten the Allen head screws where the legs meet in the middle of the Y, it seems to misalign the feet. There's a turn knob at the end of one of the feet to make up for any unevenness on the flooring but even that doesn't come close to helping with how far the feet are aligned. I basically had to loosen up the Allen head screws to get this thing to sit level but I had to deal with the whole thing tipping over occasionally.
Scritto da: PatG
Good for my purposes
Not sure how these would work for a production shop but as a woodworking hobbyist they do the job fine. I used these as a rest for 12 foot shiplap cutting. Expect to find more uses in the future. Much easier than dragging the wife out to the shop as a helper.
Scritto da: Timothy Neff
Excellent for single person use
I love this device to miter my long board when I have no assistance. Great for easy adjustments. Excellent tool for the DIY person.
Scritto da: H Blake
All of the correct parts should be in the package.
One of the bolts for the legs was too short, can you send me another? It needs to be 2” long.
Scritto da: Peter
Unbalanced
The media could not be loaded. Not very user friendly and the roller is not wide enough which makes it un sturdy
Scritto da: shawn mckelvey
Pratique mais peu solide
Pratique mais peu solide au premier vissage le support de tension pour la hauteur a brisé. Outils a prendre avec des gants blancs
Scritto da: Amazon Customer
easy to assemble and use
Simple- no issues. Good product.

Prodotti correlati

hot

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart