Blue Sea Systems 7038 Interruttore automatico serie 187, montaggio a pannello, 40A 40a DC Interruttore serie 187, montaggio a pannello

Name: Blue Sea Systems 7038 Interruttore automatico serie 187, montaggio a pannello, 40A 40a DC Interruttore serie 187, montaggio a pannello
Brand: Blue Sea Systems
SKU: 0534203890644
Price: 88.02 EUR
Availability: InStock

Brand:Blue Sea Systems

3.8/5

€
88.02

Combina la commutazione e la protezione del circuito in un unico dispositivo Funzionamento chiaro a leva singola Soddisfa i requisiti di protezione dall'accensione esterna SAE J1171.

Quantity

Aggiungi al carrello Compra subito

EAN: 0534203890644

Categories: Strumenti e miglioramento della casa, Elettrico, Interruttori, centri di carico e fusibili, Interruttori, Interruttori magnetici,

Dimensione terminale: 5/16-18. Tensione massima: 48 V CC, capacità di interruzione: 5000 A a 12 V, 3000 A a 24 V, 1500 A a 42 V. Grado di protezione IP66 impermeabile. Il design Trip Free non può essere mantenuto attivo durante la condizione di corrente di guasto. L'interruttore automatico per montaggio a pannello da 40 A CC combina la commutazione e la protezione del circuito in un unico dispositivo.

Brand	Blue Sea Systems
Circuit Breaker Type	Standard
Country of Origin	USA
Current Rating	40 Amps
Domestic Shipping	Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	7.75 x 4.75 x 2.17 inches
Item model number	7038
Manufacturer	Blue Sea Systems
Product Dimensions	7.75 x 4.75 x 2.17 inches; 3.2 Ounces
Voltage	48 Volts

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Morgan MacIntosh

Works as advertised

I built myself am extra fused power block for my 2011 Ford Crown Victoria and wired this straight to the fuse block to operate an internal cabin Rove 2 4K dash cam. The on/off switch enables me to turn the camera on when needed and off when not. The voltmeter is a plus as my car has a higher rated alternator (200 amps) than a civilian Crown Victoria (135 amps). It enables me to monitor the volts going through my extra fuseblock and ensures that my system is operating inside nominal parameters (14 amps).

Scritto da: Sam Ness

Great product

I've had this installed in my converted sprinter van to use for sending power back to my house batteries, and haven't had any issues. Unit seems really solid and well built, the breaker shuts off when I trip it, and it was easy to install.

Scritto da: Larry R.

Will not Trip

First of all I purchased the 187series 200amp version and connected it to the positive terminals on my 200Ah LifePo4 battery. Tested it with a heavy load of 210amps. It didn't trip or showed any signs of tripping . At least I can shut down the battery easily. I then decided to spend another $100 on a 150Amp version. This time I connected it between my 2500watt inverter and the battery - making sure I connected the line to the line and the load to the load. Again tested it by plugging in my1100watt kettle and turning on the microwave at the same time. I wanted to simulate a situation whereby I might do this accidentally. I dont want to draw that much power (210amps) from my Battery at the one time. Again the 150amp didn't trip or no sign of it to trip. I had previously increased the cable size on the inverter from 16mm2 (pair) to 35mm2 because the 16mm2 was getting uncomfortably hot.. I decided to put the original cables back in again Tested once again with the same load. STILL NO TRIP. Although the cables were worryingly hot. Now it only serves as an on/off switch. I am no EE. At this stage I reckon the the cabling would be in a sorry state when these Circuit breakers trip. Perhaps I am doing something wrong. The Breakers seem very robust. I tried to do the responsible thing by fitting circuit breakers and good high amperage cable. Now it looks like I will have to go back to a Plain Old blade Fuse.

Scritto da: Randall

great breaker

this was the one i upgraded to after purchasing inferior brand. The quality is much better on these and it seems more reliable than the sub $20.00 versions.

Scritto da: rosen

Perfect quality.

Perfect quality thanks.

Scritto da: RockGardener

Plenty of room for good connections.

Before making this purchase I compared the different series specs on the Blue Sea Systems website and selected the 187 series because it had 5/16" terminals on the back as opposed to the 1/4" terminals on the 285 series because I already had plenty of 5/16" connections. If you need exact measurements for the other options I found complete information available on the manufacturers website. The print on the front does not appear to very durable as it was already a little worn before I removed it from the package, otherwise the quality appears to be great. The attached photo shows the wear on the word "Trip" and the bottom portion of the symbol below the word "ON". While I am disappointed that the print is so fragile that it was worn before removing from the package, ultimately the current amount of wear is very minor and has zero impact on the primary function of the breaker, as long as it does not wear away completely when put into use. There is plenty of room on the back of the breaker making connections possible from several angles if needed. I used standard 5/16" ring connectors, but it looks like there *might* be enough room for the wide 5/16" connectors if that is what you already have on hand.

Scritto da: Joe Myers

Excellent Breaker for Inverters

My wife needed an inverter for her work vehicle, that could power a centrifuge. So, after much research, I settled on the Blue Sea brand and this particular breaker because it can also serve as a power switch. You can feel the overall excellent quality of the breaker. The only con that is a little disappoint is the fact that the connection post nuts have no protective covers. Not a huge deal but I would have preferred nut covers. I improvised and used marine grade heat shrink on them. This was still the best option I could find either way. Would buy again.

Scritto da: Shane

Heavy duty

Bought a cheaper one first won't make that mistake again overheated and almost cought fire. Save yourself the hazard and buy quality first.

Scritto da: Amazon Customer

Quality product

This product is well made and up to industrial standards. I started out using other breakers that overheated and to tripped well under the rated amperage. Blue Sea products have all provided accurate specs and performed to the specs. I will stay with Blue Sea for all my products. This company knows what they are doing and appear to have a lot of experience. My thanks to their engineers.

Scritto da: Rob

Good quality

Blue sea is a trusted brand

Scritto da: Kaitlyn

Blue Sea is quality!

I ordered this to use as a circuit breaker for an entire race car electrical system. I am nothing less than impressed with Blue Sea’s quality. You can feel just by holding it that they did not cheap out on the materials used. Function and operating is simple - flip the little yellow arm into the block when in use, and press the red button when not. It’s that simple! Wiring is just as straight forward. This block has been tortured in muddy, wet off road racing and has performed flawlessly. I will be buying more Blue Sea products as I need them!

Scritto da: Dylan Mullin

Feels very durable and well made

Feels very durable and well made

Scritto da: Simon Arsenault

You pay for what you get

Works great! Using for a Lewmar Profish 1000 windlass. Previously ordered another "70" amp breaker from China/another no-name brand which tripped constantly. No issues with this one. A bit pricey, but you get what you paid for.