Blazer International C7425 Kit faro quadrato a LED per rimorchio con luci di retromarcia integrate

Name: Blazer International C7425 Kit faro quadrato a LED per rimorchio con luci di retromarcia integrate
Brand: Blazer International
SKU: 0028845074253
Price: 100.41 EUR
Availability: InStock

Brand:Blazer International

3.6/5

€
100.41

Il kit di luci per rimorchi quadrati a LED Blazer C7425 con luci di retromarcia integrate è progettato per essere conforme agli standard di sicurezza FMVSS108 statunitensi e CMVSS canadesi applicabili per rimorchi di larghezza inferiore a 80 cm. La durata di una luce per rimorchio a LED supera di gran lunga le tradizionali luci per rimorchio a incandescenza. Il basso assorbimento di corrente e la durata di un LED forniscono una luce che non richiede manutenzione e l'illuminazione più rapida ti mantiene più sicuro mentre sei in viaggio. La funzione di backup offre 350 lumen di luce che forniscono un'illuminazione più precisa per rimorchi posteriori, attraccati o garage. La luce di retromarcia fornisce anche un avviso visivo agli altri che il rimorchio si sta muovendo in retromarcia. Le lenti sono sigillate acusticamente per fornire protezione dall'umidità e dalla corrosione. Inoltre, tutta l'elettronica è rivestita di resina resistente all'acqua per un secondo strato di difesa. Le luci di stop/coda/di direzione sono dotate di opzioni universali di montaggio posteriore e laterale. Il kit include (2) luci di stop/coda/di direzione, un cablaggio a 5 vie da 20 piedi, staffa per targa resistente alla corrosione, bulloneria di montaggio e istruzioni in tre lingue, tutto il necessario per una facile installazione. Nota: per l'installazione sono necessarie 7 lamelle a 5 vie piatte.

Quantity

Aggiungi al carrello Compra subito

EAN: 0028845074253

Categories: Settore automobilistico, Accessori Esterni, Accessori per rimorchi, Illuminazione,

Sommergibile, l'elettronica è protetta da un involucro di plastica e sigillata con resina epossidica per resistere alla corrosione e all'umidità. La funzione di backup offre 350 lumen di luce che forniscono un'illuminazione più accurata per rimorchi posteriori, ormeggi o garage. Doppia opzione di montaggio, montaggio sul retro o sul lato del rimorchio. Funziona con sistemi a 12V. Include (2) luci di stop/coda/di direzione, un cablaggio a 5 vie da 20', staffa per targa resistente alla corrosione, bulloneria di montaggio e istruzioni in tre lingue.

Brand	Blazer International
Brand	‎Blazer International
Color	Multicolor
Color	‎Multicolor
Country of Origin	‎Taiwan
Customer Reviews	4.6 4.6 out of 5 stars 454 ratings 4.6 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	1.75 x 5 x 5 inches
Item Dimensions LxWxH	‎1.75 x 5 x 5 inches
Item model number	‎C7425
Item Weight	‎0.01 ounces
Lens Color	Red
Lens Color	‎Red
Lens Material	Plastic
Lens Material	‎Plastic
Light Source Type	LED
Light Source Type	‎LED
Manufacturer	‎Blazer International Trailer & Towing Accessories
Manufacturer Part Number	‎C7425
Position	Rear
Position	‎Rear
Product Dimensions	‎1.75 x 5 x 5 inches
Special Feature	Submersible
Special Feature	‎Submersible
Special Features	‎Submersible
Vehicle Service Type	Trailer
Vehicle Service Type	‎Trailer
Voltage	12 Volts
Voltage	‎12 Volts

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: jcww001

Nice lights not very bright

Not as bright as I hoped they would be, but otherwise nice lights

Scritto da: Dan De Pons

Great product but figment is off

The lights are great. Pretty easy to install. The wire that comes with it is plenty adequate for the size trailer I have. My only issue is the size of the light. Compared to the lights that were on my trailer these ones seemed bigger and didn’t fit right. I had to cut some plastic away just to get them to sit more flush with my mounting bracket. And they are still slightly angled down and not flush.

Scritto da: Greg

No load resistors needed

I had to make a modification to fit the lights in my trailer. I have completely surrounded light mounts and the license plate light was wider than the cutout. Other than that, these are perfect. Lots of brightness and these are the first led taillights I’ve had that I didn’t need to use a load resistor to work with my Audi. Many newer vehicles use PWM to check for lights burned out and so the vehicle knows if a trailer is plugged into the vehicle. These work with a normal 7 pin to 5 pin adaptor.

Scritto da: Jesse

Great LED's, probably best suited for smaller trailers.

I've had these lights for roughly a month or so. They seem to be very high quality thus far. The LED's are all very bright. My only complaint is the wiring harness could be a few feet longer. It says it fits "trailers up to 80 inches wide" that might be the case if you had a 12 foot long or shorter trailer. I installed these on a 76"x16' trailer. The wiring harness would not have been long enough but thankfully the 7 pin "wiring block" I used gave me 4 or 5 extra feet so I did not have to buy more wiring.

Scritto da: Jordan

Great led lights! Easy to wire up instructions.

These are my second set of these lights I have put on trailers. I love the reverse lights for late night park jobs. These lights make a big difference on any trailer highly recommend these lights to anyone.

Scritto da: Jon Stewart

All you need

Love the integrated reverse light. Helps greatly when backing at night

Scritto da: denny

LED

Bright LED's and seam to be holding up well on my boat trailer.

Scritto da: Tim in Columbus

Very bright, backup light a bonus

Easy to follow directions but who needs em anyway, wiring is super easy to figure out. Very bright and very much love the backup light feature. The reverse lights help for the reasons they should.

Scritto da: Don V

Good for the money.

The kit works very well, I thought it came with separate side marker lights, it did not. The wiring came up a little short, but I added a couple of feet on each side. The lights are nice and bright, and work as they should.

Scritto da: johnfenchak

Really nice, works great

Replaced old trailer lights. These are much brighter and back up feature is nice

Scritto da: Stanley

The lights work great

Purchased these lights because they are LED and had all of the required components (side marker light, running lights, brake lights and reverse lights in one package that was easy to install. The lights came with a test feature for the white reverse lights so I waited until it was dark outside and tested the reverse feature and found it more than adequate for our little trailer. The wiring harness had both the car and trailer sections. Spliced into the reverse lights in the Escape and extended the wire to reach the length required to join up with the rest of the old 4 wire system. Attached the new 5 wire car end by dipping the stripped wire ends into electrical grease and then crimping the butt splice connectors and sealing them. Did the same with the left and right tail lights. It was easy and works perfectly. Bought these lights

Scritto da: Pedro

How many engineers does it take to change a light?

Super bright and compatible fit with my old incandescent lights.... Highly recommend!!!

Scritto da: Valentine

Great Product!

Finally someone found a clever way to integrate reverse lights into a typical trailer lights kit! I would have given it 5 stars if it would have come with the 2 front, yellow, side marker lights. The Good: Awesome lights kit, bright, comes with both the 5 pin wiring kit for the trailer end AND the 5 pin wiring kit for the car end. Smart thinking as 5 flat pin connectors are somewhat rare. You can connect your trailer with the new 5 pin flat connector to a 4 pin flat connector wired car and everything will work fine, you just won't have reverse lights functionality. Good price for the products provided. The Bad: The wiring kit for the trailer end only comes with a short ground wire, which, I guess is standard, but if you have bad grounding transmission through your foldable trailer, for example, the lights will flicker. I spliced ground wires going all the way to the back lights and front yellow marker lights. The lights are sold as submersible, however one of my lights wires were not sealed properly like like the other light was. Maybe just a slip up of one worker in the factory. The Ugly: Nothing