0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

Acquirenti Prodotti B2598H Gruppo chiusura a molla, 2,53 x 4,68 pollici, nero 1,0

Brand:Buyers Products

3.7/5

€
36.84

Acquirenti Prodotti La chiusura a molla saldata è progettata per l'applicazione con innesto a 90°. Il meccanismo a molla può essere bloccato in posizione aperta; ruotare per portare la molla in posizione chiusa. Il fermo viene fornito con un tubo in acciaio inossidabile o trattato termicamente. Il gruppo chiusura a molla presenta un perno e una molla in acciaio inossidabile.

Quantity
Aggiungi al carrelloCompra subito

EAN: 0782247517052

Categories: Settore automobilistico,

Durevole e affidabile: fondata nel 1946, Buyers Products è diventata leader nel settore delle attrezzature per autocarri grazie al nostro impegno per l'assistenza clienti, l'innovazione e il valore in tutta la nostra gamma di prodotti. Facciamo le cose nel modo giusto: progettiamo prodotti come se li stessimo costruendo per noi stessi, perché lo siamo; I nostri team sono composti da ingegneri ed esperti che sanno come rendere eccezionale un prodotto. Più che semplici parti: dalle attrezzature per la neve e il ghiaccio alle cassette degli attrezzi, all'idraulica, al rimorchio, all'hardware per camion e rimorchi ai nostri innovativi prodotti di illuminazione: è incredibile ciò che i prodotti dell'acquirente possono fare per il tuo camion. La molla e il perno a molla in acciaio inossidabile offrono la massima resistenza alla corrosione. Il bullone caricato a molla può essere bloccato in posizione aperta secondo necessità.. Tipo di adattamento: Universal Fit.
Brand Buyers Products
Brand ‎Buyers Products
Color Black
Country of Origin ‎India
Customer Reviews 4.7 4.7 out of 5 stars 667 ratings 4.7 out of 5 stars
Exterior ‎Zinc Plated
Is Discontinued By Manufacturer ‎No
Item model number ‎B2598H
Item Weight ‎11.2 ounces
Manufacturer ‎Buyers Products
Manufacturer Part Number ‎B2598H
Material Stainless Steel, Carbon Steel
Model ‎B2598H Spring Latch Assembly
Number of Pieces 1
Pin type Spring
Product Dimensions ‎4.68 x 2.03 x 1.5 inches

3.7

13 Review
5 Star
79
4 Star
14
3 Star
3
2 Star
2
1 Star
2

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: JV Wisconsin
Strong simple latch
Preforms great for the cost, welded onto a trailer rail for the ramp and extremely simple to open/close. will be buying more in the future
Scritto da: Jason
Works great. Fit perfectly on end of 2x2 square tube (with nice edge to mig weld)
I made some swing doors (for a "dump bed" contraption in the bed of my RTV900). I hauled 50 yards of mulch with the contraption last week (1.5 yards at a time--1000 lbs?). This latch would have held much better than what I had (that latch failed). I got this and in 10 minutes (obviously) welded it right on top of a 2x2 as shown. I think it's a 3/4 nut I welded to the other door. It keeps the doors from opening. I can adjust or add another if they pop open during the next job. I left big gaps in everything to keep mulch from getting trapped. If the travel in the pin was another 1/4 or 1/2 that would be great for my application.
Scritto da: Kenny
Heavy Duty!! Great pricing!!!
I put this on my 6x14 trailer gate and it works awesome! Very heavy duty latch!! Makes locking my gate quick and efficient! No more lost pins!! I will purchase this again when I build another trailer.
Scritto da: The fishing guy
Quality control
Product is definitely heavy duty weld on , the components are thick ( unpainted) steel . So some minimum surface rust/ corrosion is expected. My issue is with the quality control. I ordered 2 total . 1 came with the stamped opening to lock the pin in the back position on the same side. I have not tried to contact the seller, i tossed the shipping package. And Put the part up for later use in the bags they came in. After opening I found the defective stamped part. Quality control All in all . Pro’s =. Heavy construction, strong spring, handle is soiled. Con’s = quality control . 2&1/2 stars ( 50% of the order was defective).
Scritto da: Matt K.
Recieved two different parts with the same part number.
I ordered a quantity of two of the assembled version. Recieved both in seperate shipments. They were the same brand and had the same part number on the package but the packaging and the parts in each package were not the same. They were close and function the same but there are subtle differences between them. When you are installing multiples of an item on a trailer for a customer they typically want the parts to match and as a professional I would not do a job where they didn't. So I ordered two of the unassembled versions. Exact same thing happened. Same part number but the same variation between the parts. Luckily each of the different parts matched the two different parts from my first order so now I have one set of each version and was able to get the job done with one matching set to use on the next job. After that though I will not be buying this brand again due to the inconsistencies in their product.
Scritto da: Tom W.
heavy duty
First off my trailer has a full tongue to the first axle. I would not add a side gate if the trailer did not have a full tongue. I wanted to make a side load gate for my 12,000 lb 20 foot trailer. It is much easier to load a 2 ton pallet from the side and push two on from the rear. Used the shot one on the front and the longer one near the axle.
Scritto da: Wendy Bartz
Worked great, heavy-duty
I bought 4 of these for a project. One was assembled backwards as can be seen by the retaining notch on the wrong side of spring tension. Also the pin is 16mm not 5/8 " . Had to go back and re-drill my holes larger. They worked great despite these issues and would buy again.
Scritto da: Joy
Great Purchase
This is a very sturdy latch assembly. It's also a good price.
Scritto da: Pen Name
Very sturdy
Very strong
Scritto da: Mr Mike
robust but not accurate
First off, this is very heavy duty, and requires some strength to engage. if only it had been thought out better. The only way to weld it on is on the front (pin) end. If you weld it to something from the side you will not be able to operate the handle as it is much bigger than the squares dimensions. The reason for 4 stars is the quality of machining, the roll pin sticks out past the frame and on my unit only one pin makes contact as you can see in the photo. Either the hole was not drilled perpendicular to the shaft or the cast square was uneven
Scritto da: Richard Wysynski
Super strong
Great product to pin my folding utv ramp In place
Scritto da: Old Bear
Great product and well built
I returned this as it was too big for my project - but they are very well built and should last for years in their intended role.
Scritto da: Amazon Customer
I'm happy , perfect pieces for my application
Fast shipping , well packaged will work great for my application.

Prodotti correlati

hot
Reese Towpower 74429 Connettore a T
0.1/5

€ 26.40

Reese Towpower 74429 Connettore a T
0.1/5

€ 26.40

hot
Bell Automotive 22-1-97478-9 Coprivolante David Gonzales Rose
3.6/5

€ 58.05

Bell Automotive 22-1-97478-9 Coprivolante David Gonzales Rose
3.6/5

€ 58.05

hot
BIG RED AT42002R Cavalletti per cric per auto in acciaio Torin: capacità 2 tonnellate (4.000 libbre), rosso, 1 paio
3.7/5

€ 101.64

BIG RED AT42002R Cavalletti per cric per auto in acciaio Torin: capacità 2 tonnellate (4.000 libbre), rosso, 1 paio
3.7/5

€ 101.64

hot
ADCO 46005 SFS Aqua-Shed Copertura per Rimorchio per Cavalli con Tirante Paraurti - 16'1" a 18' 16'1" - 18'
3.1/5

€ 577.45

ADCO 46005 SFS Aqua-Shed Copertura per Rimorchio per Cavalli con Tirante Paraurti - 16'1" a 18' 16'1" - 18'
3.1/5

€ 577.45

hot
Filtro aria abitacolo UAC FI 1147C
3.6/5

€ 29.35

Filtro aria abitacolo UAC FI 1147C
3.6/5

€ 29.35

hot
WARN 94700 Verricello 4700 CC
4.1/5

€ 1246.20

WARN 94700 Verricello 4700 CC
4.1/5

€ 1246.20

hot
Set di cuscinetti conici Coast To Coast 32008
4.1/5

€ 41.91

Set di cuscinetti conici Coast To Coast 32008
4.1/5

€ 41.91

hot
Blazer International C7300 Kit luci di traino magnetiche a LED Luce di traino a LED
3.4/5

€ 86.17

Blazer International C7300 Kit luci di traino magnetiche a LED Luce di traino a LED
3.4/5

€ 86.17

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu