3M Scotchlok IDC (connettore a spostamento d'isolante) elettrico resistente all'umidità 804-BULK, blu, 18-16 AWG (solido/a trefoli), 14 AWG (a trefoli), confezione da 500

Brand:3M

3.6/5

327.33

600 volt max. filo da costruzione; 1000 volt max. insegne e infissi. Temperatura di esercizio 194F (90C). Elencato UL come connettore per cavi a pressione per UL486C ed è conforme a RoHS 2011/65/UE. Accetta rame pieno/a trefoli da 18 a 14 AWG. Utilizzare per circuiti di controllo, dispositivi, elettrodomestici, segnali, sistemi PA e cablaggio automobilistico/marino/camper. Crimpa in modo indipendente la canna e la presa su terminali e connettori isolati e non isolati.

EAN: 0054007061359

Categories: Strumenti e miglioramento della casa, Elettrico, Filo,

600 volt max. filo da costruzione; 1000 volt max. insegne e infissi. Temperatura di esercizio 194F (90C). Elencato UL come connettore per cavi a pressione per UL486C ed è conforme a RoHS 2011/65/UE. Accetta rame pieno/a trefoli da 18 a 14 AWG. Utilizzare per circuiti di controllo, dispositivi, elettrodomestici, segnali, sistemi PA e cablaggio automobilistico/marino/camper. Crimpa in modo indipendente la canna e la presa su terminali e connettori isolati e non isolati.
Color Blue
Connector Type Idc
Contact Material Plastic
Gauge 16.0
Insulation Material Non-Insulated
Item model number 804-BULK
Manufacturer 3M
Product Dimensions 17.62 x 8.75 x 14.12 inches; 1.9 Pounds

3.6

13 Review
5 Star
76
4 Star
13
3 Star
5
2 Star
2
1 Star
3

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Happy along the Smoky Hill River.....
VERY handy.
Makes wiring easy. You will need a pair of pliers and a flat nosed screw driver to help seat the wire. You will learn how to pull the metal connector out and seat the correct way. Works great. Thank you.
Scritto da: Fred K. Wilson
Pieces come with dielectric compound in the wire insert area.
These are typical wire connectors, so they work as well as any other. I was surprised to find the dielectric compound. But, after thinking about it, I conclude that was a good idea to help maintain a long term electrical connection at the "spliced" area. It was a little messy, though, so be sure to have a few paper towels handy at the work site.
Scritto da: Sara
As expected....
Work the same as those I normally purchase from the electrical suppliers......because they ARE the same as I purchase from electrical suppliers.
Scritto da: Becky M.
Fast delivery
Very happy with product and will be getting more!
Scritto da: L. P. Ashley
Better Than Most (I Hope)
I've tried several types of connectors and, due to the gel and the tight seal, these appear to be ones that will survive the elements. They were not easy to attach at first but once you get the hang of it, the process gets easier. I used them on 16 gauge wire and getting the main running wire into the slot is not easy. I found that using pliers to pinch it in works the best. When you go to pinch the main "door" shut, make sure you're holding the lamp wire all the way into the slot, and pinch very hard with the pliers. On some connections I had to go back and squeeze really hard to fully bite through the insulation. Of the five I used, one does seem to be temperamental, losing the connection sometimes when the main wire wire is disturbed. However, I had to replace one connector in that location and it may be that the removal damaged the wire. If so, I'll put another one on in another part of the main wire and think that will fix the issue.
Scritto da: Amazon Customer
I'll never splice outdoor lighting cable again
I used these connectors to install low voltage lighting in my front yard.Peace of mind knowing that a positive connection has been made and not using wire nuts and the uncertainty of keeping a weatherproof connection. I read reviews that 14G wire is too thick. The trick is to use a bit of the lube in the connector to "prime" the wire. It will clip in nice and secure. You just need to push it in. I used needle nose pliers to help distribute the force along the wire where it mates to the connector. Do a few of them and you'll get fast.
Scritto da: Milaus Rutkowski
Works well with the right technique.
It's a great connector when you have the right tools. It's a real stretch using 16G wire. Don't try 14G, it will be a headache and probably not work. If you have a long run and need 14G I would recommend another form of connection. A thin shafted screwdriver will make life easier when you're trying to attach the main run to the connector. Once you get the process down it's a great connector and holds and seals well. The goop displaced (displacement connector) really isn't a big deal. We'll see how well they hold up in the Florida weather.
Scritto da: VC
Perfect for easy wiring!
Got these to wire in some new headlights with a halo, they made this project so much easier and faster! No need to strip and tape, just insert and snap shut. They keep your connection watertight and are low profile.
Scritto da: BC logan
Great
Excellent product, and I particularly liked the silicone added, which made connections a snap
Scritto da: AU
Awesome!!!
Used for my landscape lighting project. Made things super convenient and easy!! Work great so far!
Scritto da: siquem Bernal Mendoza
Geniales
Para realizar derivaciones de cables de manera más segura y sin dañar mucho el cable original son geniales, además de hacerlo muy rápido.
Scritto da: CNT
Best water resistant connector
Works very well... best water resistant connector
Scritto da: Jon
Perfect
High quality and work great

Prodotti correlati

hot
Cavo CU UF-B W/G da 250 piedi 6/3 grigio
0.1/5

€ 2640.69

Cavo CU UF-B W/G da 250 piedi 6/3 grigio
0.1/5

€ 2640.69

hot
Woods 28828226 12/2 15' NM-B W/G Wire
3.8/5

€ 47.25

Woods 28828226 12/2 15' NM-B W/G Wire
3.8/5

€ 47.25

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart